You searched for pushrods - Page 5 of 24 - Engine Builder Magazine
Compound-Turbo 5.9L Cummins-Powered Mercedes Unimog

Jeff McCord of LinCo Diesel Performance recently put together this unique 5.9L Cummins engine that will be the powerplant for a 1965 Mercedes Unimog utility truck. Check it out!

1,000 Horsepower LB7 Duramax Engine

Like many before him, Bryan Woitas got bit by the diesel bug after experimenting with some mild power-adders on his daily driver. Years later, he has a 1,000-horsepower LB7 Duramax to show off!

A Look at Lead Times

Lead times are no longer months upon months as they were in the middle of 2020 and throughout 2021, but the situation is still of some concern, and it’s forced engine builders to get creative at times.

2,200 Horsepower Compound Turbo 6.7L Cummins

Josh McCormack is no stranger to high-horsepower Cummins builds – this engine was built in-house at his shop Wide Open Throttle Motorsports and makes nearly 2,200 horsepower on nitrous. Check it out!

Dream Engine Giveaway Ep. 4 – Bottom End Assembly

Now that Chris has checked all our specs, we begin to assemble the bottom end components of our small block Ford such as the rotating assembly, main and rod bearings and the camshaft. Next episode, we will be getting into our cylinder head assembly and more of the valvetrain components. Thanks to our Component PartnersWorld

Supercharged 526 cid Hemi Engine

With a long history of street cars and street racing, as well as experience with Top Fuel and Top Alcohol dragsters, Jamond Haug of Homewrecker Motorsports knows a thing or two about engine work. Check out his supercharged 526 cid Hemi, which sits inside a 1969 Z28 Camaro!

Dream Engine Giveaway Ep. 3 – Checking Specs

We double check our specs on this small block Ford prior to assembly, and show you what to look for to ensure the engine lives.

Compound Turbo 5.9L VP44 Cummins Engine

Drew Carter is one of those guys who just won’t let the 5.9L VP44 die out! With this build, he’s another guy who has shown that it still has some staying power in the diesel racing world. Check it out!

6.6L LLY Duramax Engine

Brian Tom’s 05′ Silverado “Goldilocks” is powered by a 6.6L LLY Duramax that makes around 1,100 horsepower on nitrous, it’s our Diesel of the Week. Check it out!

Compound Turbo P-pumped 24v Cummins Display Engine

Dakota Sargent of Fullhook Diesel knows a thing or two about 24v Cummins engines, so he took it upon himself to build a custom display engine that kids could rev up at events. Check it out!

Dream Engine Giveaway Ep. 2 – Block Prep

Our block is back from the machine shop and is ready to get prepped for assembly. We walk you through those initial steps before our rotating assembly can be installed. Make sure you enter to win this small block Ford here: https://www.enginebuildermag.com/2022-engine-giveaway/ Component PartnersWorld Products Man’OWar 351 blockCallies Performance Products  crank and rodsDiamond Pistons custom pistonsTotal Seal

Jesel Announces Big Leadership Changes

Jesel Inc. has announced that after 42 years, Dan Jesel will be transitioning from president and CEO to executive chairman effective immediately. Rich Runne, a 31-year company veteran will assume controlling interest and the CEO position in partnership with Wayne Jesel. “Jesel has been my life for the past 31 years,” says Rich Runne. “The

How to Measure Pushrod Length

In this episode of Steve Tech, Steve Morris covers some tips and tricks to properly measure your pushrod length in your engine.

Compound Turbo 6.0L Powerstroke

It’s often hard to find higher-horsepower 6.0L Powerstroke builds, but there are still a few guys out there who are proving the platform has big potential. Austin Denny is one of them, and his 2,000-horsepower Powerstroke is an animal on the drag strip.

Dream Engine Giveaway Ep. 1 – The Parts for our Twin-Supercharged Small Block Ford

We dive into the parts that will be making up our small block Ford Dream Engine Giveaway build.

6.0L Powerstroke Swapped F100

While racing is an option, this F100, named “PigPen,” serves its owner more as a daily cruiser. It’s driven to and from work on the regular and looks good doing it. Under the hood is a 6.0L Powerstroke that makes 700 horsepower on fuel and nearly 1,000 on one shot of nitrous. Check it out!

5,000 HP Twin-Turbo 526 cid Hemi Engine

Nicknamed King of the Jungle II, this Trans Am is a Pro275 drag car built by Cory Clemens of Clemens Motorsports Unlimited LLC. The King of the Jungle features a roaring, 5,000 horsepower, twin-turbo, 526 cid Hemi engine from Brad Anderson Enterprises. Check it out!

Enter to Win Engine Builder’s Dream Engine Giveaway

Engine Builder magazine is giving away an 800+ horsepower Twin-Supercharged Small Block Ford engine to one lucky winner.

1,500-Horsepower Cummins Enforcer Engine

This ’18 Ram 2500 is the definition of a “sleeper build.” Business on the outside, performance on the inside thanks to a Cummins Enforcer engine.

PROFORM Super-Street LS Pedestal-Mount Roller Rockers

PROFORM’s Super-Street LS Roller Rockers are for LS Gen III/IV V8 engines. Built to accommodate high-performance valve springs, up to 750 lbs., these rockers are constructed from aircraft-grade 6061-T6 aluminum.