Rebuilding the GM / Chevy 2.2L Engine
Unfortunately, this four cylinder, pushrod motor didn’t have nearly enough horsepower, so Buick, Oldsmobile and Pontiac all opted for the 1.8L SOHC Opel engine from Brazil for most of their “J” cars, and Chevy promptly made its new engine into a 2.0L/121 cid that delivered more power in 1983. The 2.0L was upgraded in 1987
Toyota 3SGTE Engine
First of all, one needs to realize that Toyota, like GM, Ford, etc., has engine “families”. However, rather than calling them names such as “big block” or “small block,” Toyota assigns them a letter code. The engine family code is the first letter (not the first numeral). The codes are as follows: A-series: 1.5L, 1.6L
Rebuilding Toyota 3.0L V6 Engine
In 1988 Toyota introduced its first V6. Most of the information that follows applies to the 3.0L version used in Toyota’s truck applications. The 3.4L is still fairly new to the aftermarket at this point. 3VZ-E – 3.0L SOHC V6 – ’88-’95 The 3VZ-E was also introduced for the 1988 model year on Toyota 4×4
Rebuilding The GM Quad 4
The Quad 4 had four valves per cylinder, tuned intake and exhaust manifolds, no distributor, no plug wires, lightweight rods and pistons to reduce shaking forces, and a crank with eight counterweights that was designed to reduce noise, vibration and harshness (NVH) and bearing wear. It didn’t have an A.I.R. pump or an EGR system,
Toyota 20R Engine
Toyota has built numerous four cylinder engine families over the years, but one that has been in use for quite a long time is the R-series. The R-series has been the main motor used in almost all Toyota pick-up trucks, as well as the rear-wheel-drive (RWD) Celica and Coronas. The 20R was introduced in 1975
1998 Market Update – Cores: The Consolidation Of The Automotive Aftermarket
Core suppliers are watching the consolidation of the automotiveaftermarket with much interest. After all, many businesses intransition are their customers. But while some core suppliersare not as busy as they’d like to be, most don’t blame the consolidationsof large retailers like Auto Zone and Chief for their troubles.Likewise, many don’t believe that the rebuilder mergers
The Nitty Gritty On Small Parts Cleaning: Many Ways To Clean Small Engine Parts
Tom Nichols, CEO and president of AutomotiveMachine & Supply, Inc., Fort Worth, TX, said availabilityis most often the key to why his shop cleans and reuses smallparts. Nichols said each day his shop cleans and reuses many smallparts, including valve locks, shims, springs, retainers, rockerarm assemblies, cam bore caps, nuts, bolts, etc. "Becausewe only
Rebuilding The Chrysler Engine Family
Much of the information used to write thisarticle was provided by Bruce Chapman, president, and the employeesof Ontario Reman, Etobicoke, Ontario, Canada. Ontario Reman isan authorized Chrysler engine rebuilder selling remanufacturedengines and small parts to Canadian Chrysler dealers. We thankthem! Chrysler introduced a whole new family of 60degree V6 engines beginning with the 3.3L OHV