Bench Racing and Dyno Testing
Business has been flat to down for many engine builders and their suppliers over the past year or more. However, there was still a great deal of interest from 140 registered attendees at the 12th annual Advanced Engine Technology Conference (AETC) in Colorado Springs, CO, held late last year at the Sheraton Colorado Springs Hotel.
The Task of Sealing Gaskets, Bill McKnight
Gasket sealing technology is a big issue with today
Dirt Track Dollars In the Shop and On the Track With Malcuit Racing Engines
It’s sometimes said that racers have motor oil or high octane racing fuel in their blood. Fearless drivers are accused of having ice-water running through their veins. For Strasburg, OH’s Brad Malcuit, the most likely ingredient pumping through his bloodstream is dirt, a fact he’ll happily attribute to family heritage. Malcuit is owner of Malcuit’s
The Science Of Aqueous Cleaning
The notion that aqueous cleaning consists only of a steel drum and hose is obviously a thing of the past. Aqueous cleaning entered the realm of advanced technology years ago and has been improving by leaps and bounds annually. These technological advances have prompted many rebuilders to re-evaluate their cleaning processes and perhaps take a
Vincent Mancini Sees the Future of PERA ; Right Here, Right Now
You might think that a popular rock band would have nothing to contribute to an engine remanufacturer. You might think the best way to make a profit is to slash expenses by all means necessary. Or, you might think things would be better if your customer would just see your side of the story for
Coretalk: September 2001
Ford Plans to Revamp Parts Distribution Network Ford Motor Co. is working to restructure and expand its United States parts distribution network to deliver service and repair parts to its dealers faster and more efficiently. Over the next three years, Ford plans to increase the number of parts distribution centers from 10 to 21, creating
First Issue Of Engine Builder
Welcome to the first issue of Engine Builder magazine. We hope you enjoy the new look as well as our emphasis on providing a closer view of all things engine related. In this issue we cover everything from emerging technology in valvetrain designs to the impact of the transformation of salvage yards on engine builders.
Pushing Into High Performance Frontiers
Engine Technology is the Talk of the Town at SuperFlow
Engine Balancing Traditional and Niche Market Opportunities, John Witt
Like many segments of the auto market, automotive machine shops have seen technology changes, changes in marketing/distribution channels (crate motors, for example) and the consolidation of shops. Staying competitive and profitable can be a daily challenge. The selection of services you offer and the direction in which you grow your business has never been more
Torque-to-Angle/Yield Threaded Fasteners
All the original equipment manufacturers (OEMs) have fastener labs with lots of sophisticated equipment and well-educated people working on fastening issues. They even have their own professional association – The Bolting Technology Council – which holds meetings and seminars about fasteners. I’m not a fastener engineer, and I’m not going to make you into one.
When your market is in a state of change, how do you respond effectively?
Ever notice how negativity becomes a self-fulfilling prophecy? People focus on how tough things are, and sure enough, things usually get a lot tougher. On the other hand, ever notice how those shop owners who are looking toward the future of their businesses always are better able to jump over the present day hurdles that
Threaded Fasteners Torque-to-Yield and Torque-to-Angle
All the original equipment manufacturers (OEMs) have fastener labs with lots of sophisticated equipment and well-educated people working on fastening issues. They even have their own professional association The Bolting Technology Council which holds meetings and seminars about fasteners. I’m not a fastener engineer, and I’m not going to make you into one.
Cleaning Aluminum
"Ten years ago, when there wasn’t that much aluminum, people were scared," said Mike Wigert, sales manager of spraywasher manufacturer LS Industries. "They didn’t know how to regulate their ovens, they didn’t know which chemicals to use, and they were tarnishing their aluminum parts, and probably ended up hand cleaning a lot of them," he
Inside Nitrous Oxide Engines
The recreational use of nitrous oxide as a horsepower-enhancing compound first came into prominence in the 1960s. But its first application to internal combustion engines was for far more deadly purposes. During World War II, the Germans reportedly were the first to install nitrous oxide systems on their fighter planes. The Allies soon followed and
Message From Incoming PERA President Jim Ormsby
Sometimes we need to exceed even our own expectations. That’s the message from Jim Ormsby, incoming Production Engine Remanufacturers Assoc-iation (PERA) president and current general manager of Franklin Power Products, a production engine remanufacturer (PER) located in Franklin, IN. They’re words that all PERA members should take to heart if they wish to re-energize shrinking
1999 Machine Shop Of The Year Award Winner: Metric Automotive Engineering Ltd
Each year, the staff at Automotive Rebuilder magazine recognizes one machine shop that displays business practices that go above and beyond the norm. This year, along with input from the Engine Rebuilders Association (AERA), we have selected Metric Automotive Engineering (Pty) Ltd., from Germiston South, Republic of South Africa. Metric was chosen from numerous entries
Bio-Remediation-Managing Munching Microbes
The practice of using microbes to break down and clean up hazardous and unwanted chemicals has been used for many years. However, most people were first introduced to the practice of using oil digesting microorganisms in 1989, when television news broadcasts showed microbes being used in the cleanup of the Exxon Valdez spill, which deposited
Preventing EME
Automotive engines have undergone serious changes in the past few years as they have become lighter and far more powerful. These changes can have significant impact on the cores rebuilders receive for rebuilding. In search of lighter engine components, casting technology which was considered "thin wall casting" in the
On Market Issues: Staying In Touch With The Forces Driving Today’s Market.
The Automotive Parts Rebuilders Association(APRA) incoming chairman, Steve Fallen, knows the importance ofstaying in touch with the forces driving today’s market.What are those market forces? Fallen, 49, who is also presidentof Ennis Automotive, Inc., Ennis, TX, a supplier of rewound stators,rotors and armatures to electrical rebuilders, feels that demandfor rebuilt product is expanding. However, due
Jobber Rebuilt Small Parts Report
Most rebuilders will tell you that the markethas never been more competitive than it is today. Many will alsotell you that the past 12-18 months have been difficult in termsof maintaining their sales levels of rebuilt units. However, although total units sold may be downindustry wide, according to a recent survey of 1,000 jobbers acrossthe