StangTv built a 1,000+ HP capable engine for its 2011 Mustang project Wild E Coyote. They equipped this project with a JPC single turbo kit. This is the ultimate in Ford modular performance.
The 9117 sprint car pumps are trusted and used by some of the top Sprint Car engine builders in the country.
Barnes Systems’ 9117 Sprint Car oil pumps are designed with an integral oil filter mounted directly into the mounting flange. This allows engine builders to keep lines to a minimum, since the pressure oil is internally fed into the oil filter. The 9117 sprint car pumps are trusted and used by some of the top Sprint Car engine builders in the country.
BoostLine Connecting Rods are designed to survive under big boost and large hits of nitrous oxide. The 4340 steel rods have a hybrid design that combines the strength of an I-beam rod with the light weight of an H-beam rod. They also have triangulated pockets where the big end meets the beam area. This arrangement
Edelbrock’s Pro-Flo 4 Plus Self-Learning Engine Management System makes it easier than ever to swap a Gen III Hemi into your classic Chrysler, Dodge, or Plymouth car or truck. The self-learning ECU adjusts the fuel map as you drive, providing optimum performance with no need for laptop tuning or costly dyno sessions. You can use the
Built with the finest materials available, our Camshaft Belt Drives feature several performance and valve train stability enhancements over traditional timing chains and gear drives. The Gates patented High Torq Drive™ reinforced belt spins dry on a steel crank pulley and a hard coated aluminum upper pulley and helps isolate crankshaft harmonics to the valve
Hot Shot’s Secret extends the company’s Adrenaline® Racing product line with a new competition diesel performance additive – ADRENALINE R82+™. Formulated for competitive off-road vehicles, ADRENALINE R82+ combines a powerful cetane improver with Hot Shot’s Secret’s new ADRENALINE Racing Top Lube fuel lubricant to decrease wear by up to 41% in ASTM testing. The result is a diesel
Sandy Wilkins of Wilkins Racing Engines recently allowed us to visit his engine and machine shop in Mooresville, NC. We were thoroughly impressed by how clean and organized his shop was and the caliber of the engines his shop churns out. We got the full details of this big block Chevy nitrous engine he built
It’s hard to miss Stainless Diesel’s #CancerSucks S10, which features a compound turbo 5.9L Cummins engine. During the 2023 Ultimate Callout Challenge, we caught up with Steve O’Neal to get the details of this special truck and it’s Cummins powerplant for our Diesel of the Week. Related Articles – Harrell Engine & Dyno Shop Tour
We all know Pete Harrell of Harrell Engine & Dyno in Mooresville, NC is real good at doin’ stuff, like building high-horsepower, forced induction engines. Earlier this summer, we stopped by HED for a tour and to talk to Pete about some of the current builds he had going on. One of the engines nearing
Pro Motor Engines in Mooresville, NC and owner Dennis Borem have a rich history in NASCAR and other forms of racing. We got to visit the shop earlier this summer, and the team was wrapping up a dyno session on a newly assembled LS3 engine for TA2 racing. We got the full details of the
