FUELAB Fuel Delivery Systems for 1994-1998 Dodge Cummins 12 Valve Engines - Engine Builder Magazine

FUELAB Fuel Delivery Systems for 1994-1998 Dodge Cummins 12 Valve Engines

FUELAB Velocity In-Line High Performance Lift Pumps are now available for 1994-1998 Dodge Cummins 12 Valve Engines. Velocity pumps supply the increased fuel demands of engines modified for more power, and are offered in 200 GPH or 100 GPH versions.

Velocity 100 Lift Pump
Velocity 100 Lift Pump

FUELAB Velocity In-Line High Performance Lift Pumps are now available for 1994-1998 Dodge Cummins 12 Valve Engines. Velocity pumps supply the increased fuel demands of engines modified for more power, and are offered  in 200 GPH (Velocity 200 – Model #30308 – Supports up to 1800 HP) or 100 GPH (Velocity 100 – Model #30307 – Supports up to 500 HP) versions. Engineered as a premium quality, powerful, speed controllable and reliable replacement for the OE Dodge lift pump. Feature brushless motors for long life and low current draw, as well as a flow through design for cool operation. An aerospace design based poppet relief valve provides stable fuel pressure to the injector pump, and no dynamic shaft seals ensure reliability. FUELAB’s Vortex air separation and water/filtration system protects fuel injectors and provides pure fuel to the engine. Pumps are quiet, install easily and use standard replacement filter elements. Hand-built in the USA. See how relief valve design affects fuel pressure and flow at http://fuelab.com/forums/topic/diesel-lift-pumps-what-is-more-importantpressure-or-flow/.

FUELAB Performance Installation Kits provide all the parts needed for a professional quality installation of FUELAB Velocity In-Line Performance Lift Pumps in 1994-1998 Dodge trucks with the Cummins 12 Valve Engine. Only the highest quality parts are used, including fuel rated hose, custom wire harnesses, multiple vehicle year plumbing components, clamps, and draw straws. The Performance 100 Installation Kit (Model #20107) is used to install Velocity 100 In-

Velocity 200 Lift Pump
Velocity 200 Lift Pump

Line High Performance Lift Pumps (Model #30307), and includes 3/8” fuel line.  The Performance 200 Installation Kit (Model #20108) is used to install Velocity 200 In-Line High Performance Lift Pumps (Model #30308), and features 1/2” fuel line.

MSRP
Model #30307 – $615.00
Model #30308 – $800.00
Model #20107 – $130.50
Model #20108 – $190.50

For more information on FUELAB’s innovative fuel delivery solutions visit www.fuelab.com.

You May Also Like

CP-Carrillo Pistons and Rods for VW/Audi

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels.

CP-Carrillo offers #SC7630 pistons and rods for the Volkswagen/Audi EA888 Gen III 2.0L TSI/TFSI engine. This engine is in numerous applications, including the VW Golf Mk7 R, Audi S3 and Audi TTS vehicles.

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels to take your engine to the next level. The pistons are made to accept 1mm larger valves, as well as deeper valve pockets to accommodate many aftermarket cams.

Eneos Racing Pro 10w-50 Oil

With Racing Pro 10w-50, a 50/50 ester mix provides exceptional wear protection, extra high horsepower, and further anti-oxidation stability.

Eneos 10w-50 motor oil
Fluidampr Performance Damper for Mazda Miata

Fluidampr performance dampers protect your engine from destructive crankshaft torsional vibration.

Fluidampr Mazda Miata damper
Mahle PowerPak Pistons for 6.0L and 6.4L Powerstroke Engines

All four sets offer incredible versatility, allowing a daily driver to become a weekend warrior for drag, dyno, or pulling competitions.

Point One Small Block Chevy Head Stud Kit

Point One’s E190 head studs boast an impressive 190,000 psi nominal tensile strength.

Cadillac Supercharged LS engine

Other Posts

Turbocharged 5.9L Common Rail Cummins Engine in a 1947 Ford

After sitting in his father-in-law’s backyard for a number of years, this 1947 Ford was gifted to Chase Wells’ wife. Chase owns 1 Way Diesel Performance and knew someday he’d bring the truck back to life. He did so using a 5.9L common rail Cummins engine on a special episode of Texas Metal’s Loud and Lifted. Check out the result.

Mild vs. Wild: Scheid Diesel and a Pair of 6.7L Cummins Engines

When it comes to building diesel engines, Scheid Diesel is a shop perennially at the top of people’s lists. As such, we made the trip to Terre Haute, IN to visit with owner Dan Scheid and to see the various aspects of the business and discuss the builds of two 6.7L Cummins engines. Check out

Weinle Motorsports Sheet Metal Intakes

These custom aluminum sheet metal intakes are built to your specs.

Turbocharged 6.7L Second Gen Cummins Engine

Thanks to attending a truck pull event at an early age, Sean Purdy can’t shake his passion for diesel trucks and engines. He recently completed a fresh build on his 1999 Ram 2500 with a turbocharged 6.7L Cummins second gen-swapped engine.

6.7L Cummins engine