Chicago Pneumatic Compact Composite Angle Impact Wrench - Engine Builder Magazine

Chicago Pneumatic Compact Composite Angle Impact Wrench

Chicago Pneumatic has launched a new compact CP7727/37 angle impact wrench for the vehicle service market, which features compact design, low weight, high power and durability. The user-friendly angle wrench has a revolutionary design compared with traditional angle impacts.

CPT5928 - CP7737 Product

Chicago Pneumatic has launched a new compact CP7727/37 angle impact wrench for the vehicle service market, which features compact design, low weight, high power and durability. The user-friendly angle wrench has a revolutionary design compared with traditional angle impacts, and delivers maximum torque in confined areas found in engine compartments and under the vehicle.

The CP7727/37 3/8” and ½” angle impact wrench is a powerful tool, capable of providing users with 220 ft.-lbs. of maximum torque in reverse. The impact wrench is designed with a direct drive system and a jumbo hammer mechanism with steel motor to provide the operator with a durable and efficient tool, enabling mechanics and vehicle service professionals to increase their uptime and productivity.

The CP7727/37 is just 9.58in (240mm) in length and 3.46in (88mm) in height, allowing the user to access areas where maneuverability with a standard tool would be difficult. The molded composite and advanced ergonomics of the CP7727/37’s handle means it easily fits into the user’s hand and provides them with the comfort they need during jobs. The unique positioning of the motor combined with a jumbo hammer and direct drive mechanism also means the new angle impact wrench is better balanced, robust and more efficient on the job.

The impact wrench can be operated single-handedly with a full teasing trigger, giving great control to the operator and enabling them to easily remove or tighten fasteners in the most difficult to reach applications.

For more information: www.cp.com

You May Also Like

Check Out What’s New at Dura-Bond Bearing

New transmission bearings, cam bearings and valve seat options.

We caught up Dura-Bond Bearing's Bill Dolak at the 2023 PRI Show to get a run down of what we can expect from the bearing company in 2024. Dura-Bond has new transmission kits, new cam bearings for the LS3 and Ford Godzilla engines, and a new copper-infiltrated powder metal valve seat, among plenty more.

ARP Special Chaser Taps

ARP has expanded its tap offerings to include some 22 different sizes.

ARP chaser taps
Summit Racing Forged Pro Pistons

Made in the USA, Summit Racing Forged Pro Pistons are made using ultra-modern technology and materials so they’re stronger and lighter.

CP-Carrillo Pistons and Rods for VW/Audi

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels.

Eneos Racing Pro 10w-50 Oil

With Racing Pro 10w-50, a 50/50 ester mix provides exceptional wear protection, extra high horsepower, and further anti-oxidation stability.

Eneos 10w-50 motor oil

Other Posts

Fluidampr Performance Damper for Mazda Miata

Fluidampr performance dampers protect your engine from destructive crankshaft torsional vibration.

Fluidampr Mazda Miata damper
Mahle PowerPak Pistons for 6.0L and 6.4L Powerstroke Engines

All four sets offer incredible versatility, allowing a daily driver to become a weekend warrior for drag, dyno, or pulling competitions.

Point One Small Block Chevy Head Stud Kit

Point One’s E190 head studs boast an impressive 190,000 psi nominal tensile strength.

Cadillac Supercharged LS engine
Weinle Motorsports Sheet Metal Intakes

These custom aluminum sheet metal intakes are built to your specs.