Connect with us

Products

Edelbrock E-CNC Heads For S/B Chrysler

These heads are for use on 1967-1991, 318-360 c.i.d. Chrysler LA engines. They feature fully CNC intake, exhaust ports, combustion chamber and have an intake port volume of 225cc.

Advertisement

main-image

Advertisement
Click Here to Read More
Advertisement

These heads are for use on 1967-1991, 318-360 c.i.d. Chrysler LA engines. They feature fully CNC intake, exhaust ports, combustion chamber and have an intake port volume of 225cc. These heads are an in-line valve design incorporating a 16° valve angle (stock is 18°) for improved air flow and increased power levels over heavily ported stock versions. They also feature the Chrysler W5 bolt pattern and have raised exhaust ports. The intake port has also been raised approximately 3/4″ and the flange has also been extended to accommodate a stock (race) intake manifold such as our Super Victor #2815.

Finally, a 5.56″ overall length valve (+0.600″ from stock) and raised rocker cover permit larger port cross-sections than in the stock head. Four versions are available; bare, bare with valves, complete (for hydraulic/flat tappet cams and solid roller cams) and Pro Port Raw. End-seal spacers are provided.

Advertisement

POPULAR POSTS

Tech Center

Service Issues on Ford 4.6L SOHC & DOHC Engines

Carburetor Tuning: A/F Mixture, Air/Fuel Equation

Cleaning Engine Blocks & Engine Cylinder Heads

Ticking, Knocking Noise Complaints: Ford 4.6L / 5.4L 3V Engines

Connect