Edelbrock Victor Series Water Pumps for Certain LS Engines - Engine Builder Magazine

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Engine Builder Magazine
Content for engine professionals and enthusiasts
Products

Edelbrock Victor Series Water Pumps for Certain LS Engines

Edelbrock Victor Series water pumps are designed for GM LS applications and are reverse rotation and available for right or left return line configuration.

Engine Builder
By Engine Builder

Edelbrock Victor Series water pumps are cast at the Edelbrock Foundry and machined at Edelbrock’s manufacturing facility in California for the best quality and performance. These two water pumps are designed for GM LS applications and feature the same great characteristics in all Victor Series products.

Related Articles

These pumps are reverse rotation and available for right or left return line configuration. A black anodized pulley is also available separately to complement these pumps.

  • Cast with quality A356 aluminum
  • Heavy duty 3/4″ bearing
  • Durable 3/4″ pilot shaft
  • Billet steel hub
  • Improved impeller design that increases coolant flow
  • Black anodized pulley available separately
  • Designed, cast and machined in the US for the best quality

You May Also Like

Products

COMP Cams HRT Camshaft for Gen III Hemi

Swap your Gen III Hemi’s factory cam for a COMP Cams HRT Camshaft and you’ll boost horsepower without beating up your valvetrain. The hydraulic roller cams have COMP’s Low Shock Technology profiles designed to maximize horsepower, improve stability at higher RPM, and are gentle on the valve springs for longer life.  The COMP Cams HRT

Engine Builder
By Engine Builder

Swap your Gen III Hemi’s factory cam for a COMP Cams HRT Camshaft and you’ll boost horsepower without beating up your valvetrain. The hydraulic roller cams have COMP’s Low Shock Technology profiles designed to maximize horsepower, improve stability at higher RPM, and are gentle on the valve springs for longer life. 

Read Full Article

More Products Posts
Edelbrock Performer RPM Gen III Hemi Cylinder Heads

Factory cylinder heads for Gen III Hemi engines are pretty darn good. Edelbrock’s Performer RPM Gen III Hemi Cylinder Heads are even better. The fully assembled heads feature fully CNC-machined combustion chambers, CNC-profiled bowls, and CNC-profiled port entries/exits for improved airflow—up to 337 CFM on the intake side at .700-inch of valve lift. Edelbrock says

By Engine Builder
Amsoil Launches New 10W-30 Commercial-Grade Diesel Oil

AMSOIL has added a 10W-30 diesel oil to its Commercial-Grade family of products. New AMSOIL 10W-30 Commercial-Grade Diesel Oil is designed for those seeking an upgrade over conventional and other synthetic-blend oils in heavy-duty equipment and vehicles. It is a synthetic-blend product with greater than 50% synthetic content to help keep trucks and equipment operating

By Engine Builder
Cometic Spring Energized MLS Head Gaskets

These gaskets are available for GM LSX and LS applications.

By Engine Builder
Silver Seal Products’ Magnum 45 Valve Seat Wheels

An excellent wheel to use on diesel engine tractors and trucks.

By Engine Builder

Other Posts

448 cid Billet LS Engine

Pete Harrell of Harrell Engine & Dyno is real good at doin’ stuff, like building turbocharged and forced induction high-powered engines such as this 448 cid billet LS engine for Limited Drag Radial. Check out what went into this 2,500+ HP engine!

By Greg Jones
Harrell Engine & Dyno’s 2,500+ HP Turbocharged 448 cid Billet LS Engine

We all know Pete Harrell of Harrell Engine & Dyno in Mooresville, NC is real good at doin’ stuff, like building high-horsepower, forced induction engines. Earlier this summer, we stopped by HED for a tour and to talk to Pete about some of the current builds he had going on. One of the engines nearing

By Greg Jones
Naturally Aspirated LS3-Based TA2 Engine

With a 40-year history in all sorts of racing, machining and engine building, Pro Motor Engines in Mooresville, NC can do just about anything in-house from NASCAR to drag racing and everything in between. Just check out this LS3-based TA2 spec engine!

By Greg Jones
Pro Motor Engines’ LS3 Engine Build for TA2 Racing

Pro Motor Engines in Mooresville, NC and owner Dennis Borem have a rich history in NASCAR and other forms of racing. We got to visit the shop earlier this summer, and the team was wrapping up a dyno session on a newly assembled LS3 engine for TA2 racing. We got the full details of the

By Greg Jones