Lucas Oil Safeguard Ethanol Fuel Conditioner with Stabilizers - Engine Builder Magazine

Lucas Oil Safeguard Ethanol Fuel Conditioner with Stabilizers

Today’s fuels vary in quality, which is precisely why this fuel conditioner contains effective additives to prevent engine rust and corrosion associated with ethanol fuels.

Manufactured by Lucas Oil Products IncSafeguard Ethanol Fuel Conditioner with Stabilizers provides protection against issues that may arise when using ethanol-based fuels. Today’s fuels vary in quality, which is precisely why this fuel conditioner contains effective additives to prevent engine rust and corrosion associated with ethanol fuels.

Lucas Oil’s formula is entirely soluble in all ethanol fuels and contains effective oxidation inhibitors to stabilize fuel and prevent varnish and gum. As a result, Lucas Oil’s Safeguard™ Ethanol Fuel Conditioner with Stabilizers will not harm filters as it works to combat deposits and protect your engine oil lubricants from the harmful effects of alcohol combustion.

This fuel conditioner is ideal for automobile and marine applications and is also safe to use with both two-stroke and four-stroke engines. This includes fuel mixtures such as E-10, E-15, E-85, pure ethanol and others in between, including gasoline.

When applied to ethanol fuel regularly, users can expect to enjoy the following benefits: Cleans injectors, valve seats, combustion chambers and other critical fuel components; Stabilizes fuel and prevents varnish and gum formation in ethanol and gasoline; Combats deposits and protects engine oil lubricants from the harmful effects of alcohol combustion; and inhibits corrosion.

You May Also Like

Summit Has RaceTec Pistons

With almost 1,300 configurations available, Summit Racing has the RaceTec Racing or AutoTec piston that fits your engine build.

With almost 1,300 configurations available, chances are good Summit Racing has the RaceTec Racing or AutoTec piston that fits your engine build. It’s like getting custom pistons right off the shelf.

AutoTec PistonsAutoTec Pistons are forged from low-expansion 4032 aluminum alloy to maintain tighter piston-to-wall clearances. That means better cylinder sealing, lower cylinder wear, and OEM noise levels, making them ideal for street and lightly boosted applications. Features include:• CNC-diamond turned skirts• CNC-machined ring grooves• Top ring land gas distribution grooves to enhance performance and improve ring seal • Broached double pin oilers• Wristpins, wire locks, and ring set included

Point One Small Block Chevy Head Studs

Point One’s E190 head studs boast an impressive 190,000psi nominal tensile strength and are made from grade 8740 steel sourced only from US mills.

LSX Oil Pump Mounting Brackets from Peterson Fluid Systems

Kits include all necessary hardware for mounting oil pumps to the engine block.

Hot Shot’s Secret Stiction Eliminator

Hot Shot’s Secret Stiction Eliminator is engineered to remove stiction, the sludge and varnish created from burnt oil, while also lubricating.

Howards Cams Track Smart Forged H-Beam Connecting Rods

Designed for serious street and sportsman race engines, these H-beam rods are forged and CNC-machined from certified 4340 high tensile steel.

Other Posts

Supertech Sodium-Filled Valves

These Supertech valves offer a significant reduction in valve head temperatures for today’s turbo engines.

Dart Fully Counterweighted LS Crankshaft

These eight-counterweight cranks are precision CNC-machined from premium 4340 steel billet.

Cobb Tuning Subaru Stage 2 Power Package

Cobb OTS maps are aimed at reliably increasing power output with the use of Cobb Stage 2 Power Packages.

Turbosmart’s New Fuel Pressure Regulator Lineup

Turbosmart regulators demonstrate leading fuel control and response via a true 1:1 ratio with superior flow and bypass capacity.