JE IMCA/USRA 2-Barrel Lightweight Flat Top Pistons - Engine Builder Magazine

JE IMCA/USRA 2-Barrel Lightweight Flat Top Pistons

JE is excited to add another part number to our circle track arsenal with this ultra-lightweight IMCA/USRA 2-barrel piston.

JE is excited to add another part number to our circle track arsenal with this ultra-lightweight IMCA/USRA 2-barrel piston. Designed for racing application specific performance, these pistons feature:

• Extremely lightweight (383g) for maximized off-the-corner acceleration
• Bore sizes range from 4.030in to 4.065in with .005in increments to maximize block compatibility.
• Strut lightening holes help remove mass and improve windage
.043in gas nitrided top, .043in Napier second, and 3mm oil ring reduces drag
• Accumulator and contact reduction grooves
• Double pin oiling

You May Also Like

Summit Racing Camshaft Bearing Bore Alignment Tool

The Summit Racing Cam Bearing Alignment Tool fits Gen III and Gen IV LS engines.

cam bearing tool

When you’re installing new cam bearings in an LS engine block, the first four (from back to front of the engine) are usually no problem. That’s because the block helps keep the cam bearing installation tool centered in the bearing bores. But when it comes to the front cam bearing, there is nothing to keep the installation tool centered in the bore. That means the chances of that bearing going in cockeyed are pretty high.

Kaase Racing Engines’ P-51d Cylinder Heads

Kaase Racing Engines’ new P-51d cylinder head includes concepts developed from three years of revisions and testing.

Elgin Chrysler Hemi Engine Hydraulic Lifter/Guide Assemblies

Elgin Pro-Stock OE-quality hydraulic roller lifter/guide assemblies for 2004-newer Chrysler Hemi engines without MDS cylinder deactivation.

Isky Dual Valve Spring Set

These sets feature drop-in installation and are wound from chrome silicon wire.

Holley’s Sniper 2 EFI Platform Gains Bluetooth Capability

Tech advancement brings even greater affordability and ease of use to Holley’s popular Sniper 2 EFI ecosystem.

Other Posts

Klotz Announces 2024 Product Catalog

By the time Klotz products reach your engine, it’s spent countless hours on the dyno and proven on the racetrack.

Pakelo Racing Transmission DLS A Lubricant

This product is Pakelo’s baseline IndyCar gearbox lubricant. It provides outstanding performance and greatly reduces drivetrain loss.

Scribner Plastics’ Cylinder Head Containers

Scribner Plastics’ cylinder head storage/shipping container fits small block, big block and most Pro Stock cylinder heads.

Breather Valley Plates for LS Engines by LS Classic

Precision machined from aluminum, these plates replace the stock valley plates found on Gen III and Gen IV LS engines.