Graymills' SuperSonic Liftkleen Parts Washer - Engine Builder Magazine

Graymills’ SuperSonic Liftkleen Parts Washer

Unlike standard spray cabinet washers, immersion cleaning exposes all surfaces of the part, including blind holes and small crevices, to the cleaning solution.

The SuperSonic Liftkleen is a new performance parts washer from Graymills. The TUS3725SL-model comes equipped with features to achieve ultimate parts cleaning levels. Withstanding rugged use in applications like engine rebuilding, performance racing, maintenance, and manufacturing, yet gentle enough for the most delicate of cleaning applications.

Unlike standard spray cabinet washers, immersion cleaning exposes all surfaces of the part, including blind holes and small crevices, to the cleaning solution. By combining hands-off, total immersion cleaning, easy part load/unload, vertical lift platform agitation and ultrasonic cleaning action, the SuperSonic Liftkleen takes the benefits of the Sonic Liftkleen and offers the most thorough, intensive, and efficient ultrasonic immersion cleaning system available.

SuperSonic Liftkleen Standard Features:

  • Full PLC Control with Touch Screen Interface provides programmable cycles for ultrasonics, platform oscillation, soak, sparger, filtration and heater functions up to 180°F (82°C)
  • Ultrasonic frequency sweep continuously changes sound patterns to provide greater cleaning penetration while minimizing risk of damage
  • Heavy duty immersible sealed transducers evenly distribute the ultrasonic sound waves and eliminate cleaning blind spots
  • Pneumatic lift platform allows easy loading/unloading of parts up to 300 pounds and offers agitation capabilities for thorough parts cleaning
  • Automated lid open/close via pneumatic cylinder allows for hands-free operation
  • Built in weir and surface sparger system removes floating oil and debris from the top of cleaning solution so parts are not dragged through the floating contaminant at the end of the cleaning cycle
  • Oil skimmer removes oil from weir chamber
  • Filtration system constantly filters the cleaning solution to extend bath life for more consistent cleaning
  • Double walled, fully insulated stainless steel tank and lid prevents heat loss, evaporation and reduces noise
  • Bottom drain and valve for easy change out of cleaning solution
  • 24/7 programmable heater and skimmer timers
  • Standard with Low Liquid Heater Protection to disable heaters and prevent damage to machine in a low liquid situation
  • Supervisor code in HMI to prevent parameter changes by operators

For more info: https://www.graymills.com/

You May Also Like

Carrillo Forged Pistons and Connecting Rods for Ford 7.3L Godzilla

These pistons are forged from 2618T aluminum alloy and machined on dedicated CNC machine cells to tight tolerances. 2618 aluminum has a lower silicon content than other alloys. That makes the pistons stronger and more ductile—perfect for high-load, high-stress applications like superchargers, turbochargers, or nitrous oxide.  Other features include:• Rated to handle up to 1,500

These pistons are forged from 2618T aluminum alloy and machined on dedicated CNC machine cells to tight tolerances. 2618 aluminum has a lower silicon content than other alloys. That makes the pistons stronger and more ductile—perfect for high-load, high-stress applications like superchargers, turbochargers, or nitrous oxide. 

Other features include:• Rated to handle up to 1,500 horsepower• -21.1cc dish with two valve reliefs• Lateral gas-ported to maintain tighter piston-to-bore clearances for better sealing• 10.5:1 compression on E85 with 1.338-inch compression height• .990-inch chromoly wristpins for use with wire locks• Choice of 4.225- or 4.250-inch bore sizes

Fluidampr Harmonic Damper from Summit Racing Equipment

The factory harmonic damper on your modern GM, Ford, or Mopar V8 are ‘tuned’ to absorb what’s called torsional vibration in the engine’s normal operating RPM range. Performance modifications, particularly ones that increase torque, produce added vibration in an RPM range that the elastomer damper wasn’t designed to handle. That vibration will accelerate component wear,

Elgin OE Replacement MLS Head Gaskets for Ford 6.7L Diesel Engines

Elgin Industries has introduced original equipment replacement multi-layer-steel head gaskets for 2011-2020 Ford 6.7L diesel engines. Related Articles – Turbosmart TS-1 Externally Wastegated Turbocharger – FuelTech FT600 EFI System – Trick Flow Specialties DHC 200 Aluminum Cylinder Heads The new gaskets – EHG-26661 (left) and EHG-26662 (right) – match the design, fitment and quality of

Starrett Introduces Easy-to-Use Precision Wireless Electronic Depth Gages

The L.S. Starrett Company, a leading global manufacturer of precision measuring tools and gages, metrology systems and more, has introduced three Wireless Electronic Depth Gages including the W640JZ, W643JZ, and W644JZ which are made in the U.S.A., part of a line of over 40 new electronic precision gages that Starrett recently introduced to the market.

PBM Rotating Assemblies

PBM rotating assemblies have a proven reputation of quality, durability and performance.

Other Posts

Component Cleanliness

It can’t be overstated how important the cleaning machines are in the modern engine shop. Shop owners who prioritize effective and efficient cleaning techniques will find success in a more streamlined process.

CHE Precision LS Series Rocker Arms

CHE found ways to improve the factory production rocker arms reliability.

IRD Racing K4 Series Custom Carburetors

From Mega Trucks, Super Cat Class Poker Run boats, to all out drag racing, this carburetor can handle whatever is thrown at it.

Fluidampr for SRT 6.2L Hellcat Engine

Upgrading to a Fluidampr performance damper when engine mods are done further ensures long term durability and optimum power .