AMSOIL 0W-40 Synthetic Motor Oil - Engine Builder Magazine

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Engine Builder Magazine Logo
Content for engine professionals and enthusiasts
Products

AMSOIL 0W-40 Synthetic Motor Oil

AMSOIL has expanded its premium Signature Series synthetic motor oil line by adding a 0W-40 viscosity that is ideal for high-horsepower Chrysler and Nissan applications. Formulated to withstand the stress and high heat associated with these engines, AMSOIL 0W-40 provides wear protection and promotes engine longevity.

Engine Builder
By Engine Builder
Published:

AZFAMSOIL has expanded its premium Signature Series synthetic motor oil line by adding a 0W-40 viscosity that is ideal for high-horsepower Chrysler and Nissan applications. Formulated to withstand the stress and high heat associated with these engines, AMSOIL 0W-40 provides wear protection and promotes engine longevity.

Related Articles

AMSOIL Signature Series 0W-40 reduces oil consumption and emissions while resisting thermal breakdown and viscosity loss due to mechanical shear. It maximizes fuel economy and helps prevent sludge deposits to keep engines clean.

AMSOIL Signature Series 0W-40 is recommended for Chrysler and Nissan applications calling for a 0W-40 viscosity and requiring the following performance specifications: API SN, SM, Chrysler MS-12633, MS-10725, MS-10850 Nissan GT-R.

Applications include, but are not limited to, the following:

· Dodge Charger 6.1L/6.4L

· Dodge Challenger 6.1L/6.4L

· Dodge Viper 8.3L/8.4L

· Dodge Ram 2500/3500/4400/5500 6.4 L

· Chrysler 300 6.1L/6.4L

· Jeep SRT Grand Cherokee 6.1L/6.4L

· Nissan GT-R 3.8L

For more information www.amsoil.com<http://www.amsoil.com/>

You May Also Like

Products

Summit Racing Race Series Carburetors

This 750 cfm four-barrel carburetor is ideal for drag racing and street/strip applications.

Greg Jones
By Greg Jones
Greg Jones is Content Director and Editor of Engine Builder Magazine.
Published:

Summit Racing's Race Series Carburetors are fully machined and hand assembled in the USA. This 750 cfm four-barrel carburetor is ideal for drag racing and street/strip applications.

Features include:• Mechanical secondaries • Smooth milled choke• Dual-feed fuel inlets• Adjustable screw-in air bleeds• High-performance downleg boosters• Four-corner idle circuit• Secondary adjustable idle screw• Nitrophyl floats• Jet extensions for improved performance at wide open throttle• Vent whistles to prevent fuel slosh under hard acceleration• Universal-style stainless steel linkage

Read Full Article

More Products Posts
MAHLE PowerPak Pistons for Big Block Mopar Engines

These new shelf-stocked PowerPak piston sets from MAHLE are for the 383 and 400 B series and 440 RB series Mopar engines.

By Greg Jones
Hot Shot’s Secret Green Diamond 0W-20 Light-Duty Diesel Oil

Hot Shot’s Secret Green Diamond is formulated for use in GM Duramax 2.7 and 3.0 diesel engines that require Dexos D 0W-20 specification.

By Greg Jones
PRT’s 30 New Complete Strut Assemblies

The new items represent more than 10 Million vehicles in new coverage and come to expand the PRT portfolio in North American Aftermarket.

By Engine Builder
NGK MOD Series Ignition Coils

Modern high-performance engines need a bigger spark to make power. NGK’s MOD Series Ignition Coils fit the bill.

By Greg Jones

Other Posts

Turbocharged 5.9L Cummins Engine

At Back Bay Diesel Performance, repair and performance work are taken very seriously. Those capabilities are often showcased through custom shop builds, like shop owner Adam Nichols’ own turbocharged 5.9L Cummins engine for his personal drag truck. Check it out!

By Evan Laux
540 cid Small Block John Deere Light Pro Stock Engine

When it comes to PRI booth engines, Fluidampr has been a great booth to visit over the last couple years, and at the 2023 show the company had a VG Motorsports-built small block John Deere Light Pro Stock engine on display that definitely stopped us in our tracks. We got to speak with VG Motorsports

By Greg Jones
Compound Turbocharged 6.7L Powerstroke Engine

With a background in farming, Tanner Allison grew up with a passion for diesel trucks and engines. He also gravitated towards the Powerstroke platform, and has since set his sights on showing what a 6.7L Powerstroke engine can do. Check out Tanner’s most-recent diesel build!

By Greg Jones
Compound Turbocharged 6.0L Powerstroke Engine

Eric McMichael of McMichael’s Diesel Performance is a Ford guy through and through. His passion for the Blue Oval shines bright in his 2004 F-250, which features a compound-turbo 6.0L Powerstroke engine. Check it oit!

By Evan Laux