Design Engineering Ultra Sheath MA - Engine Builder Magazine

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Engine Builder Magazine Logo
Content for engine professionals and enthusiasts
Products

Design Engineering Ultra Sheath MA

Design Engineering’s new lightweight Ultra Sheath MA reflects direct and radiant heat that can cause damage to under-hood components, burn ignition wires and wiring, or damage brake and fuel lines. Designed as an upgrade to aluminum or foil sleeving, Ultra Sheath MA is constructed from a process that impregnates molten aluminum to the core fabric.

Engine Builder
By Engine Builder
Published:

Ultra Sheath comboDesign Engineering’s new lightweight Ultra Sheath MA reflects direct and radiant heat that can cause damage to under-hood components, burn ignition wires and wiring, or damage brake and fuel lines. Designed as an upgrade to aluminum or foil sleeving, Ultra Sheath MA is constructed from a process that impregnates molten aluminum to the core fabric giving it higher heat reflective properties. This process provides a higher sustained heat capability; up to 1100°F for direct heat.

Related Articles

More flexible and 40% lighter than standard foil or bonded aluminum products, Ultra Sheath MA trims to desired lengths for quick and easy installation; even in hard to reach locations. Ultra Sheath MA is available in multiple ID sizes and lengths, including bulk: ½” ID x 3’ (#010230), ½” ID x 15’ (#010231), ¾” ID x 3’ (#010232), and 1-¼” x 3’ (#010233).

For more information: www.designengineering.com or 800-264-9472

You May Also Like

Products

CP-Carrillo Kawasaki Teryx KRX1000 Pistons and Rods

Both pistons and rods are available off the shelf and include custom features incorporating CP-Carrillo high standards and consistent quality.

Greg Jones
By Greg Jones
Greg Jones is Content Director and Editor of Engine Builder Magazine.
Published:

CP-Carrillo is highlighting its 2020 Kawasaki Teryx KRX1000 pistons and rods for the Kawasaki ATV/UTV turbo and naturally aspirated engines. Part #M3040 features a 92mm stock bore and 9.5:1 compression turbo piston, while part #M3041 features a 92mm stock bore and 12:1 naturally aspirated piston. Part #13220 are the connecting rods.

Read Full Article

More Products Posts
Plazmaman 5-Inch PRO Billet Throttle Body

Plazmaman’s PRO billet throttle body is designed for 3,000-plus horsepower.

By Greg Jones
Summit Racing Race Series Carburetors

This 750 cfm four-barrel carburetor is ideal for drag racing and street/strip applications.

By Greg Jones
MAHLE PowerPak Pistons for Big Block Mopar Engines

These new shelf-stocked PowerPak piston sets from MAHLE are for the 383 and 400 B series and 440 RB series Mopar engines.

By Greg Jones
Hot Shot’s Secret Green Diamond 0W-20 Light-Duty Diesel Oil

Hot Shot’s Secret Green Diamond is formulated for use in GM Duramax 2.7 and 3.0 diesel engines that require Dexos D 0W-20 specification.

By Greg Jones

Other Posts

PRT’s 30 New Complete Strut Assemblies

The new items represent more than 10 Million vehicles in new coverage and come to expand the PRT portfolio in North American Aftermarket.

By Engine Builder
NGK MOD Series Ignition Coils

Modern high-performance engines need a bigger spark to make power. NGK’s MOD Series Ignition Coils fit the bill.

By Greg Jones
LS Engine Flatout Gaskets

Flatout Gaskets LS valve cover gaskets are available in paper/silicone in 0.60″ or 0.120″ thicknesses or steel/silicone laminate in 0.50″ or 0.100″ thicknesses.

By Greg Jones
Engine Ice’s Ice Water Racing Coolant

Engine Ice’s Ice Water provides a significant reduction in surface tension, moving heat away from the engine fast.

By Greg Jones