COMP Cams FSL Series Camshaft for GM L99 Engines - Engine Builder Magazine

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Engine Builder Magazine Logo
Content for engine professionals and enthusiasts
Products

COMP Cams FSL Series Camshaft for GM L99 Engines

COMP Cams is introducing the first performance aftermarket camshaft in almost 20 years that is CARB E.O.-pending, offering drop-in convenience, with no valve spring change required, for Gen V (2010-'15) Camaro SS GM L99 engines.

Engine Builder
By Engine Builder
Published:

COMP Cams is introducing the first performance aftermarket camshaft in almost 20 years to pass the stringent California Air Resources Board (CARB) Executive Order (E.O.) process for a domestic engine. The CARB E.O.-pending camshaft offers drop-in convenience, with no valve spring change required, for Gen V (2010-’15) Camaro SS GM L99 engines.

Related Articles

Designed to work with factory Variable Valve Timing and require no computer reprogramming, the camshaft also features unique profiles on switching and non-switching cylinders for compatibility with Active Fuel Management systems. It provides the proven 30- to 50-HP improvement typical of smaller COMP Cams camshafts in LS applications without the risk of non-compliance with emissions regulations.

The COMP Cams FSL Series Camshaft for GM L99 Engines is the first in a new series of 50-state legal camshafts from the absolute leader in valve train technology. For more information: www.compcams.com

Part Number: 689-199-13

Street Price: $464.59

You May Also Like

Products

CP-Carrillo Kawasaki Teryx KRX1000 Pistons and Rods

Both pistons and rods are available off the shelf and include custom features incorporating CP-Carrillo high standards and consistent quality.

Greg Jones
By Greg Jones
Greg Jones is Content Director and Editor of Engine Builder Magazine.
Published:

CP-Carrillo is highlighting its 2020 Kawasaki Teryx KRX1000 pistons and rods for the Kawasaki ATV/UTV turbo and naturally aspirated engines. Part #M3040 features a 92mm stock bore and 9.5:1 compression turbo piston, while part #M3041 features a 92mm stock bore and 12:1 naturally aspirated piston. Part #13220 are the connecting rods.

Read Full Article

More Products Posts
Plazmaman 5-Inch PRO Billet Throttle Body

Plazmaman’s PRO billet throttle body is designed for 3,000-plus horsepower.

By Greg Jones
Summit Racing Race Series Carburetors

This 750 cfm four-barrel carburetor is ideal for drag racing and street/strip applications.

By Greg Jones
MAHLE PowerPak Pistons for Big Block Mopar Engines

These new shelf-stocked PowerPak piston sets from MAHLE are for the 383 and 400 B series and 440 RB series Mopar engines.

By Greg Jones
Hot Shot’s Secret Green Diamond 0W-20 Light-Duty Diesel Oil

Hot Shot’s Secret Green Diamond is formulated for use in GM Duramax 2.7 and 3.0 diesel engines that require Dexos D 0W-20 specification.

By Greg Jones

Other Posts

Transtar Industries to Begin Offering OE Recycled Engines

The engines are priced and graded based on part condition and mileage. All recycled engines are backed by a 90-day warranty.

By Greg Jones
PRT’s 30 New Complete Strut Assemblies

The new items represent more than 10 Million vehicles in new coverage and come to expand the PRT portfolio in North American Aftermarket.

By Engine Builder
NGK MOD Series Ignition Coils

Modern high-performance engines need a bigger spark to make power. NGK’s MOD Series Ignition Coils fit the bill.

By Greg Jones
LS Engine Flatout Gaskets

Flatout Gaskets LS valve cover gaskets are available in paper/silicone in 0.60″ or 0.120″ thicknesses or steel/silicone laminate in 0.50″ or 0.100″ thicknesses.

By Greg Jones