Holley Lo-Ram Intakes with SFI Burst Panels - Engine Builder Magazine

Holley Lo-Ram Intakes with SFI Burst Panels

Holley's popular Lo-Ram manifold with dual fuel rail configurations is now available with an integrated SFI burst panel for added racer safety.

Holley’s popular Lo-Ram manifold with dual fuel rail configurations is now available with an integrated SFI burst panel for added racer safety.

Dual Fuel Injector Lo-Ram, Front-Feed With Burst Plate Flange
The 300-625 (satin) & 300-625BK (black) front-feed intake manifold kits provide two injectors per cylinder for high volume fuel demands. Featuring a standard 6-1/8″ x 3-1/8″ burst panel flange, this manifold was designed to package high-boost induction system with a short overall height. Configured for a 105mm throttle body (Holley P/N 112-581), fuel rail kits are included with two sets of brackets for EV1 or PICO style injectors. Lo-Ram manifold kits include o-rings, plugs, and hardware required for the installation.

For more information:
Dual Injector Lo-Ram, Front-Feed w/ Burst Panel (Satin)Dual Injector Lo-Ram, Front-Feed w/ Burst Panel (Black)

Dual Fuel Injector Lo-Ram, Top-Feed
The 300-624 (satin) & 300-624BK (black) top-feed intake manifold kits provide two injectors per cylinder for high volume fuel demands. Designed to package high-boost induction systems in a short overall height, they are configured for a 105mm throttle body (Holley P/N 112-581). Fuel rail kits are included with two sets of brackets for EV1 or PICO style injectors. Lo-Ram manifold kits include o-rings, plugs, and hardware required for the installation.

For more information:
Dual Injector Lo-Ram, Top-Feed (Satin)Dual Injector Lo-Ram, Top-Feed (Black)

LS Front-Feed Lo-Ram Plenum Top with Burst Panel Flange
The P/N 300-605 & 300-605BK Lo-Ram plenum tops are designed as part of the Holley LS front-feed Lo-Ram EFI intake manifold kits. Intended for boosted engine applications, these tops include a manifold plenum burst panel to protect the engine from back-fire.
The 300-605 plenum top is machined for a standard “large” 6-1/8” x 3-1/8” burst panel. SFI approved burst panels, burst panel frame sets, and gaskets may be purchased from various manufacturers such as Allstar Performance or Specialty Fasteners.

For more information:
LS Front-Feed Plenum Top w/ Burst Panel (Satin)LS Front-Feed Plenum Top w/ Burst Panel (Black)

You May Also Like

Holley’s Sniper 2 EFI Platform Gains Bluetooth Capability

Tech advancement brings even greater affordability and ease of use to Holley’s popular Sniper 2 EFI ecosystem.

Holley Performance Brands has announced the addition of a bluetooth module for its Sniper 2 Electronic Fuel Injection (EFI) conversion ecosystem. The next-generation technology brings greater affordability and accessibility to the easy-to-install, self-tuning EFI system that allows classic cars and trucks with carburetors to run like modern vehicles.

Bluetooth module for Holley's Sniper 2 EFI ecosystem

Klotz Announces 2024 Product Catalog

By the time Klotz products reach your engine, it’s spent countless hours on the dyno and proven on the racetrack.

Pakelo Racing Transmission DLS A Lubricant

This product is Pakelo’s baseline IndyCar gearbox lubricant. It provides outstanding performance and greatly reduces drivetrain loss.

Scribner Plastics’ Cylinder Head Containers

Scribner Plastics’ cylinder head storage/shipping container fits small block, big block and most Pro Stock cylinder heads.

Breather Valley Plates for LS Engines by LS Classic

Precision machined from aluminum, these plates replace the stock valley plates found on Gen III and Gen IV LS engines.

Other Posts

CP-Carrillo Kawasaki Teryx KRX1000 Pistons and Rods

Both pistons and rods are available off the shelf and include custom features incorporating CP-Carrillo high standards and consistent quality.

Plazmaman 5-Inch PRO Billet Throttle Body

Plazmaman’s PRO billet throttle body is designed for 3,000-plus horsepower.

Summit Racing Race Series Carburetors

This 750 cfm four-barrel carburetor is ideal for drag racing and street/strip applications.

Holley Names Jordan Musser SVP of Safety and Electronics Products

Musser will lead a global team of professionals to develop and implement a comprehensive strategic growth plan for Holley’s leading portfolio of safety brands.