Fass Titanium Signature Series Diesel Fuel Lift Pump - Engine Builder Magazine

Fass Titanium Signature Series Diesel Fuel Lift Pump

The Signature Series FASS Diesel Fuel System has reduced noise to a “whisper,” while at the same time increasing fuel flow rates.

The Titanium Signature Series diesel fuel pumps are a superior fuel pump and filtration system. FASS Fuel Systems has a less than 2% failure rating with its motor and a design that implements unique features.

  • FASS Whisper Technology (FWT) was engineered to meet the stringent demands of today’s quiet diesel engines. FASS Whisper Technology effectively and drastically reduces the sound levels of the Signature Series FASS Diesel Fuel System to a “whisper,” while at the same time increasing fuel flow rates.
  • Performance Radius Cuts (PRC) are an advanced machining technique used to improve the flow of fuel through the FASS System by creating smooth flowing cuts within the aluminum housing. This prevents the reintroduction of air and vapor back into the fuel and to prevent eddy currents from forming within the corner of a 90-degree sharp angle. FASS Titanium Signature Fuel Systems are the only Fuel Air Separation System that incorporates these exclusive Performance Radius Cuts.
  • Mass Flow Return (MFR) technology is used to continually polish your fuel by keeping a positive pressure on the fuel being delivered to the engine to prevent cavitation along with galling and scoring. Then returning the fuel, that’s not yet needed, back to the tank after it has been passed through the filtration process, removing dirt, air, vapor and water. This means your fuel is being constantly “Polished” (cleaned), guaranteeing that your diesel truck always has the cleanest fuel possible. The MFR in combination with the optional FASS Fuel Heater options will help insure cold weather operations.
  • Bolt-On Bracket Mounts have now been simplified with the new bolt-on brackets that utilize your Ford Super Duty factory bed bolt, the bolt that secures your truck bed to your frame. Mounting your Titanium Signature Series lift pump takes only minutes and all brackets are made from machined steel for superior support and strength.

You May Also Like

Pakelo Racing Transmission DLS A Lubricant

This product is Pakelo’s baseline IndyCar gearbox lubricant. It provides outstanding performance and greatly reduces drivetrain loss.

Pakelo's Racing Transmission DLS A is a high-performance transmission lubricant specific for race car transmissions, such as NASCAR, Indy, and other Formula classes. It represents the result of a long-term study, design and development focused to obtain an innovative chemistry suitable for extreme conditions.

Racing Transmission DLS A provides exceptional resistance to wear and extreme pressures; great anti-oxidative, anti-rust, and anti-foam properties; and absolute shear stability. The product maintains its starting viscosity during service even when undergoing extreme mechanical stress.

Scribner Plastics’ Cylinder Head Containers

Scribner Plastics’ cylinder head storage/shipping container fits small block, big block and most Pro Stock cylinder heads.

Breather Valley Plates for LS Engines by LS Classic

Precision machined from aluminum, these plates replace the stock valley plates found on Gen III and Gen IV LS engines.

CP-Carrillo Kawasaki Teryx KRX1000 Pistons and Rods

Both pistons and rods are available off the shelf and include custom features incorporating CP-Carrillo high standards and consistent quality.

Plazmaman 5-Inch PRO Billet Throttle Body

Plazmaman’s PRO billet throttle body is designed for 3,000-plus horsepower.

Other Posts

Why Oil and Fluid Analysis Makes Your Engine and Transmission Healthier

Much like a doctor’s visit for your own health, there’s no better way to understand what’s going on inside your engine and transmission than by having a fluid analysis performed. The process is not difficult, but having an expert discuss the results with you can be a game changer for the health and life of

Turbocharged 5.9L Cummins Engine

At Back Bay Diesel Performance, repair and performance work are taken very seriously. Those capabilities are often showcased through custom shop builds, like shop owner Adam Nichols’ own turbocharged 5.9L Cummins engine for his personal drag truck. Check it out!

540 cid Small Block John Deere Light Pro Stock Engine

When it comes to PRI booth engines, Fluidampr has been a great booth to visit over the last couple years, and at the 2023 show the company had a VG Motorsports-built small block John Deere Light Pro Stock engine on display that definitely stopped us in our tracks. We got to speak with VG Motorsports

Compound Turbocharged 6.7L Powerstroke Engine

With a background in farming, Tanner Allison grew up with a passion for diesel trucks and engines. He also gravitated towards the Powerstroke platform, and has since set his sights on showing what a 6.7L Powerstroke engine can do. Check out Tanner’s most-recent diesel build!