Moroso Heavy-Duty Racing Oil Pumps for Ford - Engine Builder Magazine

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Engine Builder Magazine Logo
Content for engine professionals and enthusiasts
Products

Moroso Heavy-Duty Racing Oil Pumps for Ford

Moroso's heavy-duty Ford Oil Pumps have approximately 25% more volume over the stock oil pump for their application, but are still standard pressure oil pumps.

Engine Builder
By Engine Builder
Published:

Moroso has introduced Part Nos. 22201, 22202, 22204 and 22205, which are all heavy-duty racing Ford oil pumps. This series of engines were originally designed to have front sump oil pans. As Ford changed the chassis over the years, these engines were used in rear sump applications (except FE).

Related Articles

Moroso recommends that any time one of these engines has a rear sump oil pan or a front sump oil pan is used in a spirited driving environment, that a high-volume oil pump be installed. Oil Pumps have approximately 25% more volume over the stock oil pump for their application, but are still standard pressure oil pumps. They have a stronger casting than the stock pumps and are made in the USA. 

PART # DESCRIPTION 
22201 Ford 289-302 High Volume, Oil Pump, 25% volume over stock 
22202 Ford 351W High Volume, Oil Pump, 25% volume over stock 
22204 Ford 429-460 High Volume, Oil Pump, 25% volume over stock 
22205 Ford FE High Volume, Oil Pump, 25% volume over stock 

For more information: www.moroso.com

You May Also Like

Products

CP-Carrillo Kawasaki Teryx KRX1000 Pistons and Rods

Both pistons and rods are available off the shelf and include custom features incorporating CP-Carrillo high standards and consistent quality.

Greg Jones
By Greg Jones
Greg Jones is Content Director and Editor of Engine Builder Magazine.
Published:

CP-Carrillo is highlighting its 2020 Kawasaki Teryx KRX1000 pistons and rods for the Kawasaki ATV/UTV turbo and naturally aspirated engines. Part #M3040 features a 92mm stock bore and 9.5:1 compression turbo piston, while part #M3041 features a 92mm stock bore and 12:1 naturally aspirated piston. Part #13220 are the connecting rods.

Read Full Article

More Products Posts
Plazmaman 5-Inch PRO Billet Throttle Body

Plazmaman’s PRO billet throttle body is designed for 3,000-plus horsepower.

By Greg Jones
Summit Racing Race Series Carburetors

This 750 cfm four-barrel carburetor is ideal for drag racing and street/strip applications.

By Greg Jones
MAHLE PowerPak Pistons for Big Block Mopar Engines

These new shelf-stocked PowerPak piston sets from MAHLE are for the 383 and 400 B series and 440 RB series Mopar engines.

By Greg Jones
Hot Shot’s Secret Green Diamond 0W-20 Light-Duty Diesel Oil

Hot Shot’s Secret Green Diamond is formulated for use in GM Duramax 2.7 and 3.0 diesel engines that require Dexos D 0W-20 specification.

By Greg Jones

Other Posts

Inside the Coyote Den of Fast Forward Race Engines

Fast Forward Race Engines and shop owners Joe and Gina Irwin have been making big horsepower and well-performing engines for quite some time. Recently, the shop’s Coyote engine program has been gaining notoriety thanks to the work the shop does in conjunction with Brett LaSala and his record-setting Snot Rocket Mustang. That twin-turbo 5.0L Coyote

By Greg Jones
High Performance Expo Set for 2025 in Charlotte

The inaugural High Performance Expo (HPX) will be held from June 3-5, 2025, at the Charlotte Convention Center.

By Greg Jones
Compound Turbocharged 6.7L Powerstroke Engine

With a background in farming, Tanner Allison grew up with a passion for diesel trucks and engines. He also gravitated towards the Powerstroke platform, and has since set his sights on showing what a 6.7L Powerstroke engine can do. Check out Tanner’s most-recent diesel build!

By Greg Jones
PRT’s 30 New Complete Strut Assemblies

The new items represent more than 10 Million vehicles in new coverage and come to expand the PRT portfolio in North American Aftermarket.

By Engine Builder