Aeromotive Phantom Drop-In Fuel Pump Modules for 2008-20 Subaru WRX and STI Models - Engine Builder Magazine

Aeromotive Phantom Drop-In Fuel Pump Modules for 2008-20 Subaru WRX and STI Models

These fuel pump modules can support naturally-aspirated gasoline applications for a variety of horsepower ranges.

Aeromotive has introduced new Phantom Direct Drop-In Fuel Pump Modules for the 2008-20 Subaru WRX and STI models. These Direct Drop-In Fuel Pump Modules are available with a single 450 liter-per-hour pump or single or dual 340 liter-per-hour pumps and come preassembled for a quick and simple installation. 

The new Direct Drop-In Fuel Pump Modules for Subaru WRX and STI models work with the factory fuel tank utilizing the OEM lock ring, gasket and fuel level sender to further simplify installation. Each pump incorporates Aeromotive’s patented Jet Siphon system with foam and bladder technology to control fuel slosh and maximize fuel pickup. The modules also feature a factory-sized outlet cap with a single -06 ORB outlet port to maintain OEM fitment and require the use of a return-style regulator and return line.

Pump modules are available with either single (Part# 18080) or dual (Part# 18082) 340 liter-per-hour pumps or as a single 450 liter-per-hour (Part# 18081) module. The single 340 modules can support naturally-aspirated gasoline applications up to 725 horsepower or 505 horsepower with E85, and forced-induction gasoline applications up to 595 horsepower or 415 horsepower with E85. The single 450 liter-per-hour pump modules can handle naturally-aspirated gasoline applications up to 975 horsepower (660 with E85) and forced-induction gasoline applications up to 700 horsepower (485 with E85). The dual 340 liter-per-hour pump modules provide enough fuel for naturally-aspirated gasoline applications up to 1,575 horsepower, naturally-aspirated E-85 ethanol applications up to 1,100 horsepower, forced-induction gasoline applications up to 1,295 horsepower and forced-induction E-85 ethanol applications up to 905 horsepower. All horsepower numbers are based on motors running electronic fuel injection.

Aeromotive’s fuel pump modules are preassembled with the pump configuration of choice and are covered by Aeromotive’s limited one-year warranty. For more information on Stealth Series fuel systems and other Aeromotive products, visit AeromotiveInc.com.

You May Also Like

Breather Valley Plates for LS Engines by LS Classic

Precision machined from aluminum, these plates replace the stock valley plates found on Gen III and Gen IV LS engines.

LS Classic by Lokar recently introduced a new air/oil separator to its popular LS valley plates in which a high efficiency breather assembly and port is integrated. Precision machined from aluminum, these plates replace the stock valley plates found on Gen III and Gen IV LS engines.

CP-Carrillo Kawasaki Teryx KRX1000 Pistons and Rods

Both pistons and rods are available off the shelf and include custom features incorporating CP-Carrillo high standards and consistent quality.

Plazmaman 5-Inch PRO Billet Throttle Body

Plazmaman’s PRO billet throttle body is designed for 3,000-plus horsepower.

Summit Racing Race Series Carburetors

This 750 cfm four-barrel carburetor is ideal for drag racing and street/strip applications.

MAHLE PowerPak Pistons for Big Block Mopar Engines

These new shelf-stocked PowerPak piston sets from MAHLE are for the 383 and 400 B series and 440 RB series Mopar engines.

Other Posts

Hot Shot’s Secret Green Diamond 0W-20 Light-Duty Diesel Oil

Hot Shot’s Secret Green Diamond is formulated for use in GM Duramax 2.7 and 3.0 diesel engines that require Dexos D 0W-20 specification.

PRT’s 30 New Complete Strut Assemblies

The new items represent more than 10 Million vehicles in new coverage and come to expand the PRT portfolio in North American Aftermarket.

NGK MOD Series Ignition Coils

Modern high-performance engines need a bigger spark to make power. NGK’s MOD Series Ignition Coils fit the bill.

LS Engine Flatout Gaskets

Flatout Gaskets LS valve cover gaskets are available in paper/silicone in 0.60″ or 0.120″ thicknesses or steel/silicone laminate in 0.50″ or 0.100″ thicknesses.