Twin-Turbo 6.0L LS Engine - Engine Builder Magazine

Twin-Turbo 6.0L LS Engine

Aydan Bailey may have rolled his 1957 Chevy wagon on the last day of Sick Week, but the car's twin-turbo 6.0L LS engine was still capable of 7-second passes. Check it out!

Engine of the Week is presented by

When we spoke with Tom Bailey about his new drag-and-drive event called Sick Week, he was ecstatic about how the first-time event was going. He was also grinning ear-to-ear as a proud father after witnessing his son Aydan run his first couple 8-second 1/4-mile passes. Tom even suggested that Aydan would be trying for a 7-second pass in the last day or two. With that information in hand, we had to talk with Aydan about his Sick Week ride.

On day four of the event at South Georgia Motorsports Park, the temps were good, the sun was out and all competitors were happy about the potential to run some solid ETs! Aydan Bailey and his 1957 Chevy 210 wagon with a twin-turbo 6.0L LS engine was also looking to go low. Up to this point, Aydan had run an [email protected] mph at Bradenton and an [email protected] mph at Gainesville. Helping his Chevy wagon, affectionately known as ‘Shitbox of Doom 2.0,’ make those passes was a newly installed twin-turbo LS setup.

“The LS engine came out of a truck,” Aydan Bailey told us. “We got some upgraded internals, billet headers, a new Holley intake, a Motion throttle body, a Delta PAG radiator/intercooler to cool down the air going in from the turbos, which are Precision 68/70 turbos.”

Aydan didn’t get too deep into details of his LS engine’s internals, just noting that those parts weren’t top-of-the-line components, but rather just slightly upgraded from stock. The engine also features a wet sump oiling system.

The 1957 Chevy wagon itself is really an awesome car, complete with no shortage of patina, and was built up by Richie Crampton. The Shitbox of Doom previously featured a blown alcohol Hemi engine with a Lenco behind it. Aydan has a similar set up, except he swapped the Hemi for the LS and the Lenco for a Turbo 400.

“Out on the track it’s been pretty good,” Bailey says. “It still feels a little slow, but we’re trying to get it down in the 7s by Friday, and hopefully we’ve got enough injector. We have one set of injectors in it with two A1000 Aeromotive fuel pumps, so the biggest thing is going to be if we can get enough fuel in the engine to go that fast.”

The 6.0L LS hasn’t had a turn on the engine dyno yet, but Aydan estimates it puts out around 1,000 horsepower. At SGMP, Aydan laid down another solid run of [email protected] mph, which was his fastest run of the event. Unfortunately, in an effort to hit 7s on the last day of the event back at Bradenton Motorsports Park, Aydan flipped the wagon and skidded to a stop on the roof of the car. Fortunately, he walked away without an issue, and now it’s back to the drawing board for Aydan, the ‘57 wagon and its twin-turbo LS.

Engine of the Week is sponsored by PennGrade Motor OilElring – Das Original and Engine & Performance Warehouse Inc./NPW Companies. If you have an engine you’d like to highlight in this series, please email Engine Builder Editor Greg Jones at [email protected].

You May Also Like

Twin-TorqStorm-Supercharged 454 cid Big Block Chevy Engine

It had been more than two decades since Val Morris of Steve Morris Engines was behind the wheel of a drag car. This Chevy Malibu with a twin-supercharged 454 big block Chevy engine was her forray into drag-and-drive, and now she wants to go even faster!

Anyone familiar with the drag-and-drive scene will know the name Steve Morris and his shop Steve Morris Engines. Steve has been building high-horsepower engines for decades and is a ‘household name’ in Hot Rod Drag Week and Sick the Mag’s Sick Week circles, as Steve has both competed in these events and has been Tom Bailey’s right-hand man for numerous Drag Week wins.

Supercharged 572 cid SMX Engine

Danny Humphreys’ 928 Porsche has a supercharged 572 cid SMX engine in it from Steve Morris Engines, complete with a “shark fin” blower hat that really puts this car and engine combo over the top. We were able to catch up with Danny during day one of Sick Week 2024 at Orlando Speedworld.

Supercharged 588 cid Hemi Engine

Ken Lazzeri, head engine builder for Indy Cylinder Head, has helped build over 5,000 Hemi engines during the life of the Mopar component manufacturer’s business. We were pumped to get time with him to discuss the details of this 588 cid supercharged Hemi engine for bracket racing. Check it out!

All-Billet Subaru EJ 2.5L Engine

This 2016 Subaru STi, which features an all-billet EJ 2.5L engine, was built to showcase what Kaiju Motorsports is capable of. Not only does it look great, but all expectation is that it performs well too. Check it out!

Kaiju Motorsports 2016 Subaru STi with a billet EJ 2.5L engine
Turbocharged Billet K24 Honda Engine

Noonan Race Engineering is well-known for its V8 engine platforms, but the shop has now dipped its toe into the 4-cylinder world with a billet K24 Honda engine. The objective – huge horsepower, while keeping factory creature comforts. Check it out!

Other Posts

Silver Seal LS Engine Parts Catalog

See Silver Seal’s Chevy/GM LS7 Delphi Lifters 25341990, OEM Plastic Lifter Trays and Bolts, Complete LS7 Lifters Guides & Bolts Kit and much more.

Li’l Red Express Twin-Turbo 6.4L Hemi Engine

A couple years ago we were following along with the 2022 Midwest Drags event, and at the Dragway 42 stop, we got a front-row seat to see Rick Russell’s Li’l Red Express truck go down the track. Unfortunately, that pass quickly ended with the truck hitting the wall and crumpling the front end. Rick has

Sick Week Wins USA Today’s Readers’ Choice for Best Motorsports Race

The week-long event held throughout Florida, plays host to over 350 street cars.

NHRA Names New South Central Division Director

Johnson will oversee NHRA member tracks in Texas, Oklahoma, New Mexico, Louisiana, Arkansas and Mississippi.