Compound-Turbo "Shredder" 5.9L Cummins Engine - Engine Builder Magazine

Compound-Turbo “Shredder” 5.9L Cummins Engine

Like any sensible diesel guy, Chris Voorheis got a small taste of diesel performance and immediately wanted more. His 2006 Mega Cab went from a daily driver to a sled puller to now a formidable drag racing vehicle thanks to a compound-turbo "Shredder" 5.9L Cummins from Industrial Injection. Check out what went into the build!

Diesel of the Week is presented by

Chris Voorheis’ entry into the diesel world was somewhat spontaneous, fueled by the desire to pull his Jeep to Moab using a reliable 2006 Mega Cab. Working at a dealership, he knew the truck came with some issues, but this became an opportunity to turn it into something extraordinary.

“I enjoyed the heck out of it, and it’s like a drug to me,” Voorheis says of the diesel truck. “As soon as I had some horsepower underneath that truck, it excited me and I needed more.”

Lyle Richmond, owner of Daily Driven Performance, played a pivotal role in Chris’ diesel journey. The e-commerce shop based in American Falls, ID, provided support and sponsorship, enabling Chris to elevate his truck to new heights. Daily Driven Performance is known for offering a wide range of parts, from basic replacement to high-performance components.

Inspired by Lyle’s sled-pulling prowess, Chris transitioned his truck from a daily driver to a sled-pulling contender. After enjoying success in sled pulling, Chris then shifted his focus to drag racing. As such, Chris’ 2006 Mega Cab underwent significant transformations over the years.

Starting with a transmission build and an S360 turbo, the truck evolved into a full-on race-ready machine. He’s raced in multiple NHRDA events and plans on racing in the Ultimate Callout Challenge in 2024. The heart of Chris’ engine build is the Shredder series engine from Industrial Injection, featuring a 5.9L Cummins block. The unique Carrillo hybrid setup, with a longer stroke and shorter piston pin height, adds a distinctive touch to the build. The engine’s durability impressed Chris, surviving extensive use without showing signs of wear.

The turbo setup boasts an S488 with a GT55 110, both from Forced Inductions. Chris praises the ball-bearing characteristics of these turbos, especially the GT55, which exceeded expectations in terms of spoolability and performance. The fueling system includes Industrial Injection Cobra 400% over injectors, complemented by an Industrial 12mm pump and an Exergy 14mm pump.

Chris’ truck is equipped with a Nitrous Express Max 5 system featuring three kits of nitrous, each with .136 jets. The system’s efficiency, combined with the tuning prowess of Hardway Performance, allows Chris to achieve optimal spooling and power delivery with less nitrous and fuel.

Chris has achieved a personal best of 5.99 in the 1/8-mile and is gearing up for the Ultimate Call Out Challenge in 2024. Chris says he’s aiming for a top-five finish in his first UCC appearance. The build remains a work in progress, with plans for additional nitrous kits to meet the demands of the UCC competition.

Diesel of the Week is sponsored by AMSOIL. If you have an engine you’d like to highlight in this series, please email Engine Builder Editor Greg Jones at [email protected].

You May Also Like

Compound-Turbo 6.0L Powerstroke Engine

Tyler Lambert’s Ford F-250 started as a project with a simple goal – to extract as much power as possible. Equipped with a 6.0L Powerstroke engine, the truck underwent a series of transformations, including a compound-turbo upgrade, that elevated it to the powerhouse it is now.

6.0L Powerstroke engine

Tyler Lambert’s journey into diesel performance began in his formative years in East Tennessee. Starting as a hobbyist in high school, he soon found himself knee-deep in engine work once he began working as a boat technician at Bass Pro Shop. On the side, he also worked as a diesel technician for a local shop.

First-of-its-Kind Compound-Turbo L5P Duramax Engine

While incredibly rewarding, nothing about this L5P Duramax build was easy for Lead Foot Diesel Performance – everything was custom or a first. From the billet crank to the one-off compound turbos, this L5P Duramax is impressive. Check it out!

L5P Duramax engine
Turbocharged 5.9L VP44 Cummins Engine

A few years ago, Jordan Blackard stumbled upon a 2nd Gen 2001 Ram 2500 that was being sold by Chase Fleece of Fleece Performance. After a few years of casual driving and fixing it up, he decided in 2022 to get working on a race build featuring a 5.9L VP44 Cummins engine. Check it out!

415 cid Billet Cummins Engine in a Pro275 Cadillac

Ring Racing owner Jared Ring revealed a metamorphosis to this 2016 Cadillac ATS-V last week. The Cadillac is now equipped with radial tires and a 415 cid Cummins engine built by Freedom Racing Engines, and the combo just competed at Lights Out 15.

Cummins-powered Cadillac ATS-V Pro275 drag car
Turbocharged 5.9L Common Rail Cummins Engine in a 1947 Ford

After sitting in his father-in-law’s backyard for a number of years, this 1947 Ford was gifted to Chase Wells’ wife. Chase owns 1 Way Diesel Performance and knew someday he’d bring the truck back to life. He did so using a 5.9L common rail Cummins engine on a special episode of Texas Metal’s Loud and Lifted. Check out the result.

Other Posts

Why Oil and Fluid Analysis Makes Your Engine and Transmission Healthier

Much like a doctor’s visit for your own health, there’s no better way to understand what’s going on inside your engine and transmission than by having a fluid analysis performed. The process is not difficult, but having an expert discuss the results with you can be a game changer for the health and life of

All-Billet K24 2.2L Honda Engine

We’ve known JBR Engines owner Jose Bello for a few years, and well before that, we knew his shop was one of the premier shops in the Honda and import engine scene. During a recent visit, we got to see an all-billet Honda K24 2.2L engine coming together for a customer looking to improve upon his 5.86-second quarter mile time!

Inside the Coyote Den of Fast Forward Race Engines

Fast Forward Race Engines and shop owners Joe and Gina Irwin have been making big horsepower and well-performing engines for quite some time. Recently, the shop’s Coyote engine program has been gaining notoriety thanks to the work the shop does in conjunction with Brett LaSala and his record-setting Snot Rocket Mustang. That twin-turbo 5.0L Coyote

540 cid Small Block John Deere Light Pro Stock Engine

When it comes to PRI booth engines, Fluidampr has been a great booth to visit over the last couple years, and at the 2023 show the company had a VG Motorsports-built small block John Deere Light Pro Stock engine on display that definitely stopped us in our tracks. We got to speak with VG Motorsports