Mopar GEN3 5.7L HEMI Powers Six Vehicles at 2014 King Of Hammers - Engine Builder Magazine

Mopar GEN3 5.7L HEMI Powers Six Vehicles at 2014 King Of Hammers

Mopar GEN3 5.7L HEMI powers six 4x4 off-road vehicles at 2014 King Of Hammers
Mopar GEN3 5.7L HEMI powers six 4×4 off-road vehicles at 2014 King Of Hammers

Mopar, Chrysler Group LLC’s service, parts and customer-care brand, will be testing its mettle in the southern California desert at the 2014 Griffin King of The Hammers, an event built around what many consider the toughest one-day off-road race in the world that combines desert racing and rock crawling.

Organized by the ULTRA4 Racing Series, the week-long event is held every February on public lands in Johnson Valley, Ca. in an off-highway vehicle area known as “The Hammers.” Competitors, divided into in four distinct categories, race on a 100+ mile course that runs over terrain that includes sandy washes dotted with creosote bushes, flat dry lakebeds, sand dunes and, of course, the world-famous rock canyons and trails from which it derives its name.

Competing in the Every Man Challenge race category, which allows off-road enthusiasts a chance to race their stock and modified stock vehicles, Mopar’s GEN III 5.7 liter HEMI crate engine will power the six vehicles competing in a newly created spec class in which each entry is outfitted with the same equipment. These unique “4700 Spec Class” 4×4 vehicles have a custom tube frame design based loosely on a Jeep Wrangler, and are outfitted with Mopar’s HEMI crate engine and some of the best industry-leading parts the off-road world has to offer.

“We’re excited to supply HEMI engines to the newly formed spec class at King of The Hammers and put our quality products to the test in the toughest conditions,” said Pietro Gorlier, president and CEO of Mopar, Chrysler Group LLC’s service, parts and customer-care brand. “The 5.7 crate engines we are providing are the off-road race version of the recently announced Scat Package performance upgrades for the Challenger and Charger. This event is in essence a proving ground for our engine, set-up, calibration and parts, as we don’t just design and produce quality parts, we want to test them in the field so that customers know that they are getting the very best available.”

You May Also Like

USAC Racing Appoints New President

Jason Smith will oversee the strategic direction and day-to-day operations of USAC Racing.

The United States Auto Club (USAC), the Speedway, IN-based sanctioning body, has appointed Jason Smith as president of the organization. The newly formed president position of USAC Racing will report to USAC CEO Kevin Miller and work alongside the executive team reporting to the USAC Board of Directors.

High Performance Expo Set for 2025 in Charlotte

The inaugural High Performance Expo (HPX) will be held from June 3-5, 2025, at the Charlotte Convention Center.

Join PERA and King for a Webinar on the Development of Performance Engine Bearings

Join Stacey Stone of King Engine Bearings for a webinar on May 15, 2024 at 10am CT all about how performance bearings are developed for racing engines of modern design. Related Articles – Santa Maria Speedway to Reopen – Trans Am Names New Technical Director for TA2 – USAC’s 2024 Hall of Fame Class Important!

Santa Maria Speedway to Reopen

Santa Maria Speedway, a dirt oval located in Nipomo, CA, is reopening after closing in November 2022, according to a report from the Santa Maria Times. The speedway will host 410 Sprint Car and Go-Kart racing under the new ownership of David Castaneda, the facility’s former general manager. Related Articles – Cloyes to Acquire ATI – Holley

Trans Am Names New Technical Director for TA2

Doug Nagy comes to Trans Am as an FIA-licensed technical inspector. He previously held positions at Saleen, Bell Motorsports and Mosler Automotive.

Other Posts

MAHLE PowerPak Pistons for Big Block Mopar Engines

These new shelf-stocked PowerPak piston sets from MAHLE are for the 383 and 400 B series and 440 RB series Mopar engines.

King Engine Bearings Anounces New Rebate Campaign

During the two-month duration of the campaign, customers can take advantage of a rebate of $10 for every $100 spent on qualifying pMaxKote (XPC) products by King Engine Bearings.

Candidates Announced for SEMA Board of Directors 2024 Election

Voting will take place online beginning May 28 and is open to current SEMA-member companies.

Edelbrock Group Brands Now on MidwayPlus B2B Platform

The platform is convenient for checking prices, inventory, and freight costs before placing an order.