Engine Crack Detection Technology
It doesn’t matter if you’re rebuilding a high mileage engine and reusing salvaged components or using brand new parts right out of the box – any highly stressed component or casting that has to withstand high loads, temperatures and/or pressures should always be inspected to make sure it is free from cracks or other defects
Rebuilding The Ford 3.8L Engine
They needed an economy engine that would fit in their new cars, and they needed it fast. They had a couple of old inline sixes and a small German V6, but none of them were designed for fuel economy or the coming emissions standards, and the 250 cid engine was so tall that it wouldn’t
Coretalk: September 2001
Ford Plans to Revamp Parts Distribution Network Ford Motor Co. is working to restructure and expand its United States parts distribution network to deliver service and repair parts to its dealers faster and more efficiently. Over the next three years, Ford plans to increase the number of parts distribution centers from 10 to 21, creating
It’s A Tough Market
Is this a tough market to do business in? You bet it is. Will business ever be what it once was when small block Chevy engines fit into almost every GM car, and machine shops had an abundance of both work and customers? Not likely. Will the quality of engines continue to improve, lengthening the
Engine Balancing Traditional and Niche Market Opportunities, John Witt
Like many segments of the auto market, automotive machine shops have seen technology changes, changes in marketing/distribution channels (crate motors, for example) and the consolidation of shops. Staying competitive and profitable can be a daily challenge. The selection of services you offer and the direction in which you grow your business has never been more
Torque-to-Angle/Yield Threaded Fasteners
All the original equipment manufacturers (OEMs) have fastener labs with lots of sophisticated equipment and well-educated people working on fastening issues. They even have their own professional association – The Bolting Technology Council – which holds meetings and seminars about fasteners. I’m not a fastener engineer, and I’m not going to make you into one.
Threaded Fasteners Torque-to-Yield and Torque-to-Angle
All the original equipment manufacturers (OEMs) have fastener labs with lots of sophisticated equipment and well-educated people working on fastening issues. They even have their own professional association – The Bolting Technology Council – which holds meetings and seminars about fasteners. I’m not a fastener engineer, and I’m not going to make you into one.
Rebuilding the Chevy 3
The Chevy 191/3.1L is the bigger version of GM
Toyota 3SGTE Engine
First of all, one needs to realize that Toyota, like GM, Ford, etc., has engine “families”. However, rather than calling them names such as “big block” or “small block,” Toyota assigns them a letter code. The engine family code is the first letter (not the first numeral). The codes are as follows: A-series: 1.5L, 1.6L
Rebuilding the New Chevy 262
This enabled GM to shorten the development process dramatically because it was able to adapt a proven design. But it also allowed it to share a lot of the existing tooling from the V8 production lines so the engines could be on the road sooner. The original 200 V6 that came out in 1978 was
Rebuilding the Chevrolet LT1 Engine
Compared to the 1991 Chevy 350 L98 with TPI, the LT1 made 20 percent more horsepower, got better fuel mileage, and had a much broader torque band with 90 percent of its peak torque available from just over 1,000 rpm all the way up to nearly 6,000 rpm. GM Powertrain accomplished all of this by
Rebuilding Saturn Engines
In Jan. 7, 1985, Saturn was born when Roger Smith, the President of General Motors, announced the decision to create a whole new car company from the ground up. There were 99 people chosen to create a vision of what GM needed to do in order to prosper in the small car business into the
Rebuilding the Chevrolet LT1 Engine
Although it shared many common dimensions, looked much the same and even had a few common parts, it was totally redesigned to provide more power with lower emissions and better fuel economy. Compared to the 1991 Chevy 350 L98 with TPI, the LT1 made 20% more horsepower, got better fuel mileage, and had a
Message From Incoming PERA President Jim Ormsby
Sometimes we need to exceed even our own expectations. That’s the message from Jim Ormsby, incoming Production Engine Remanufacturers Assoc-iation (PERA) president and current general manager of Franklin Power Products, a production engine remanufacturer (PER) located in Franklin, IN. They’re words that all PERA members should take to heart if they wish to re-energize shrinking
LPG Conversions: Renewed Interest In The Use Of LPG (Liquefied Petroleum Gas) And LNG (Liquefied Natural Gas)
The recent move to clean up inner city exhaustemissions has resulted in renewed interest in the use of LPG (LiquefiedPetroleum Gas) and LNG (Liquefied Natural gas) as motor fuels.These fuels are almost pure propane with a little butane present. Tax incentives are being offered to encouragefleet operators to convert to gaseous fuels and more vehiclesare
Rebuilding the Buick 3300
The Buick 3300 was introduced in 1989 as areplacement for the 3.0L that had been around since 1982. It hadthe updated block with on-center bores, just like the revisedversion of the 3800 that came out the year before, along withseveral other changes and improvements. This engine was installed in many of the "A"bodied cars including
Engine Installation Opportunities
Much has been reported recently regarding theneed to grow the engine rebuilding and remanufacturing markets.We’re all aware of the Automotive Repower Council (ARP) whichwas recently formed to increase customer awareness on the alternativesto buying or leasing a new vehicle. And Automotive Rebuildermagazine has provided a number of features and columns dedicatedto ways to expand the
1998 Market Update – Electrical
The information provided in this article is excerpted from a presentationmade by Doug Barron, Manager of Freedom Battery Design & Application,Delphi Energy & Engine Management Systems. The presentationwas made at last year’s Independent Battery Manufacturers Association(IBMA) Convention in Chicago, IL. Barron’s comments pertain to the future requirements of automotivebatteries. However, they also address the increasing
1998 Market Update – Brakes: The Application Specific Bandwagon…The Buzzword Of The Aftermarket Brake Friction World Today
Many in the brake rebuilding market are getting on the ApplicationSpecific Bandwagon. It’s the buzzword of the aftermarket brakefriction world today. "We’re going to have to be application specific because ofperformance requirements coming out of testing procedures thatthe Brake Manufacturers Council is working on," observesGil Laycock of the Friction Materials Standard Institute (FMSI).As one who
1998 Market Update – Cores: The Consolidation Of The Automotive Aftermarket
Core suppliers are watching the consolidation of the automotiveaftermarket with much interest. After all, many businesses intransition are their customers. But while some core suppliersare not as busy as they’d like to be, most don’t blame the consolidationsof large retailers like Auto Zone and Chief for their troubles.Likewise, many don’t believe that the rebuilder mergers