MAHLE Motorsport Expands Event Schedule and SEGA Sponsorship for 2023
MAHLE Motorsport announces an expansion of their event schedule and an increase in their level of sponsorship support for the Southeast Gassers Association (SEGA) for 2023. This year, MAHLE Motorsport will attend 11 events including three SEGA events in April, June, and November, the NMCA/NMRA All Star Nationals, Ultimate Callout Challenge, Hot Rod Power Tour
Turbocharged and Nitrous-Boosted 429 cid LSX Engine
It’s tough to beat the lines and looks of a Chevy Nova. Jason Sack’s 1969 Nova is certainly up there in terms of coolest-looking, and it doesn’t hurt that it has 2,200+ horsepower under the hood courtesy of a turbocharged and nitrous-boosted 429 cid LSX engine! See for yourself!
Twin-Turbo 347 cid Small Block Ford Engine
Kyle Morris of Steve Morris Engines built up this 1996 Mustang with a twin-turbo 347 cubic inch small block Ford engine primarily by himself. It’s been about a decade in the making, but now Kyle has a 7-second capable car primed for drag-and-drive competition. See what went into the 1,800-hp engine!
NMRA/NMCA Announces Event Team Promotions, Additions
Santa Ana, California-based ProMedia has announced promotions and additions to its Holley NMRA Ford Nationals series and Red Line Oil NMCA Muscle Car Nationals series events teams. Gene Bergstrom has been promoted to NMRA/NMCA senior director of racing operations, while Michael Washington has been promoted to NMRA/NMCA racing operations manager. Bob Fairey joins the team
Complete Engine Packages
In today’s world of supply chain disruptions, it is a big benefit to be able to source an entire engine system and not have to wait for that last back-ordered component to arrive.
Vortech Supercharged 572 cid Big Block Chevy Engine
When David Pearson of Little Evil Racing shows up at the track with his Pro 275 Foxbody Mustang, people fear him, and for good reason. David has set numerous 275 drag radial world records, and with a Vortech supercharged 572 cid big block Chevy in this Mustang, another record may fall!
LS Intake Manifolds
LS swaps are popular for many reasons, but there are a lot of variations and details to sort through – more of them than you may expect – and many of them are associated with the intake manifold.
Open Loop/Closed Loop and Learning
Closed-loop control can be programmed to either add or subtract up to a certain percentage of fuel in order for the engine to reach the target air/fuel ratio.
Dream Engine Giveaway Ep. 4 – Bottom End Assembly
Now that Chris has checked all our specs, we begin to assemble the bottom end components of our small block Ford such as the rotating assembly, main and rod bearings and the camshaft. Next episode, we will be getting into our cylinder head assembly and more of the valvetrain components. Thanks to our Component PartnersWorld
Dream Engine Giveaway Ep. 3 – Checking Specs
We double check our specs on this small block Ford prior to assembly, and show you what to look for to ensure the engine lives.
Dream Engine Giveaway Ep. 2 – Block Prep
Our block is back from the machine shop and is ready to get prepped for assembly. We walk you through those initial steps before our rotating assembly can be installed. Make sure you enter to win this small block Ford here: https://www.enginebuildermag.com/2022-engine-giveaway/ Component PartnersWorld Products Man’OWar 351 blockCallies Performance Products crank and rodsDiamond Pistons custom pistonsTotal Seal
Dream Engine Giveaway Ep. 1 – The Parts for our Twin-Supercharged Small Block Ford
We dive into the parts that will be making up our small block Ford Dream Engine Giveaway build.
Enter to Win Engine Builder’s Dream Engine Giveaway
Engine Builder magazine is giving away an 800+ horsepower Twin-Supercharged Small Block Ford engine to one lucky winner.
632 Big Block Chevy Nitrous Engine
Looking to run 5.75-5.80 in the High 5 class of the 2022 Builder’s Brawl, Mike McCoy showed up with his 1966 Chevy II Nova and a BluePrint Engines 632 big block Chevy nitrous engine under the hood. Check it out!
Turbocharged 396 cid LSX Engine
With 396 cubic inches of LSX block, a 102mm turbo and tons of aftermarket and custom components helping make 1,600 rwhp, Brent Sinclair’s Camaro SS means serious business on both the street and the track. See what went into this TKM Performance engine build!
Building Big Block Marine Engines
Find out what it takes to build a formidable marine engine.
NMRA, NMCA Release 2023 Event Schedules
ProMedia has released the 2023 schedules for the Holley NMRA Ford Nationals series and the Red Line Oil NMCA Muscle Car Nationals series. The Holley NMRA Ford Nationals series will celebrate its 25th year in 2023, with several special features and celebrations planned to mark the occasion. “From kicking off our silver-anniversary season by returning
Twin-Turbo 5.0L Coyote Engine
Ryan Hargett of Hargett Automotive & Performance recently won the Super Street Small Block Power Adder class at the 2022 Summit Midwest Drags with an average ET of 7.577 at 185 mph, making him the 8th fastest drag-n-drive car in the top 100, and the fastest ever in that class. Helping achieve this feat is a 2011 Mustang with a twin-turbo 5.0L Coyote engine. You’ve got to see this!
Torque Distribution Opens Detroit Warehouse
Torqued Distribution has opened an all-new warehouse and national sales office in Detroit, Michigan with the headquarter remaining in CA.
427 cid Small Block Chevy Engine
After purchasing this 1967 Nova on Craigslist for $3,000 over a decade ago, Corey Bohl has turned it into a formidable drag-and-drive gasser. That’s in large part thanks to its 427 cubic inch small block Chevy engine under the hood. Check it out!
