Steve Morris’ ‘All the Freedom’ 555 cid Big Block Chevy Engine
Not everyone can use a 3,000 horsepower build or has a need for a great big turbocharged or ProCharged engine with EFI, so Steve Morris Engines wanted to create an engine package suitable for everyone that could be dropped into any vehicle. Introducing the ‘All the Freedom’ 555 cid big block Chevy.
Compound Turbo 6.0L Powerstroke-Swapped R35 GT-R
Nissan’s R35 GT-R is one of the most popular cars out there, and for good reason. It’s been used for countless racing applications and tuning opportunities… but have you ever heard of a diesel-powered GT-R? We sure hadn’t until we stumbled across the team at Lyfe Motorsport and Riff Raff Diesel. Check out this insane 6.0L Powerstroke-powered GT-R!
5.9L Cummins-Swapped Chevy C10
This custom 1969 Chevrolet C10 is an impressive restoration to say the least, but its outer appearance isn’t the only attraction. Underneath the hood is a 5.9L Cummins engine that makes around 800 horsepower. Check it out!
Twin-Turbo 555 cid Big Block Chevy Engine
Ever been gifted a car by your friends? Me either. Duane Ruhl must have some great friends, because they got him a 1992 Mustang as a roller, and from there, Ruhl got to work turning it into a formidable street/strip car. Under the hood is a twin-turbo 555 cid big block Chevy engine, and we’ve got the details!
Building Big Block Marine Engines
Find out what it takes to build a formidable marine engine.
Mechanically Injected Triple-Turbo DX460 Engine
The well-known super stock pulling truck “Cummins Killer” is a prime example of the power capability of the Duramax engine. Featuring a triple-turbo setup and Wagler’s DX460 platform, this engine belts out around 3,200 horsepower. Check it out!
Elgin PRO-STOCK Valve Lifter and Guide Sets for GM LS Based Engines
Elgin Industries has introduced genuine original equipment Elgin® PRO-STOCK® valve lifter and guide sets for a broad range of General Motors LS Series engines. Now available through leading engine parts distributors, Elgin PRO-STOCK lifter and guide sets are available for engines with or without GM’s Active Fuel Management (AFM) technology. The sets are not designed
Isky Mega Racing Cams
Mega Racing Cams are available in a large variety of specs and dimensions to suit what you’re looking for.
Elgin Lifter and Guide Sets for GM LS Engines
The LS7 style lifters can be used in a variety of other LS engine applications.
Twin-Turbo 540 cid Big Block Chevy Engine
Glenn Hunter has owned this 1956 Bel Air since he was in junior high school in 1979. Today, the car features a twin-turbo 540 cid big block Chevy engine and has been a certified drag-and-drive beast since 2010. Find out what helps this 7-second car get down the track!
427 cid Small Block Chevy Engine
After purchasing this 1967 Nova on Craigslist for $3,000 over a decade ago, Corey Bohl has turned it into a formidable drag-and-drive gasser. That’s in large part thanks to its 427 cubic inch small block Chevy engine under the hood. Check it out!
Calico Coatings/CERTESS®CARBON DCX
CERTESS®CARBON DCX has an amorphous hydrogenated carbon layer with a standard metallic sublayer for standard application.
Building a 6.0L LS Engine
What’s more legendary than the LS engine? With over 20 years in production, the LS has become the chosen V8 for many an engine builder. This article dives into what you’ll need consider when building a high-performance 6.0L LS engine.
94mm Turbocharged 427 LS-Powered Pontiac Trans Am
What started as a sad roller rescued from Kentucky has since turned into a turbocharged 427 LS monster capable of 6-second passes and 250 mph. Thanks to the Chechaks and Vinson Racing Engines, this 1998 Pontiac Trans Am is a serious drag-and-drive contender. Check out what went into this 2,000-hp LS engine build.
“Organ Grinder” Hot Rod Features 454 Big Block Chevy Engine
This hot rod isn’t flashy, but it certainly earns points for cool factor. Dubbed the “Organ Grinder,” this 1930 Ford Model A has a 454 big block Chevy stuffed between the frame rails. Check it out!
Shop Solutions June 2022
I needed a narrow grooving tool to quickly clean carbon from piston ring grooves for an engine restoration project. All the usual grooving tools were too wide.
900-HP Turbocharged 6.0L Powerstroke Engine
That first foray into diesel racing is often an exciting one, with owners fighting trial and tribulation to get their engines built up to racing standard. Justin Court is just on the horizon of having his first fully built 6.0L Powerstroke race truck finished. Check it out!
98mm Twin-Turbo 572 cid SMX Engine
After keeping his 1993 wagon stashed away for the past nine years, when Steve Morris of Steve Morris Engines was ready to race again, he knew the wagon needed something special. Steve gave it a full Pro Mod chassis and one of his twin-turbo 572 cid SMX engine setups! Check out this awesome billet engine!
John Deere Rat Rod with a 496 Big Block Chevy Engine
You haven’t seen anything like Jesse Madaffari’s rat rod. It’s a 1972 John Deere 7520 tractor cab on an ’82 GMC S15 truck frame with a 496 big block Chevy engine capable of 10-second passes. Go ahead and read that again – you read it correctly. Check this thing out!
Blown 414 cid Small Block Chevy Engine
Jeremy Bonnett is no stranger to the drag-and-drive scene. He’s been at it for a number of years. Those familiar will surely recognize his 1929 Pontiac featuring a blown 414 cubic inch small block Chevy. Check it out in our newest Engine of the Week!
