Engine Kit Opportunities
In nearly all aspects of today’s competitive consumer market, the customer is king, brand means everything, and warranties on parts and services are a given, right? Great news for the value-minded shopper, but what about the supplier? In the automotive industry, of course, OEMs have been offering unprecedented warranties and financing terms for the past
Tractor Pulling: It’s Not Your Granddad’s John Deere Anymore
Tractor pulling has been with us for as long as there have been tractors. Farmers used to pull their horses, mules or oxen and, just as today, each bragged that he had the biggest and strongest. Today, at the top echelons of pulling, the technology is equal to anything else in motorsports. Although you won’t
What’s Hot In Performance – Cams, Lifters & Rockers
The camshaft is really the heart of every performance engine because the cam defines the engine’s breathing potential, its torque curve and peak horsepower. The camshaft controls when the valves open, how quickly they open, how far they open (with some help from the rocker arms), how long the valves are held open, and when
Engine Balancing
In the dark ages of the automotive industry, engine balancing was considered an art practiced exclusively by performance engine builders. Only those wizards of speed (it was widely believed) could understand the forces that caused drivetrain vibration – and more importantly, those that stopped it. Those few who could balance an engine were looked upon
Big-Inch Cadillac’s
While some engines are relatively rare in machine shops, the big Cadillacs have remained a consistent source of income. These engines are Cadillac’s last big hurrah at traditional big-cube, flagship GM engines. Surprisingly, they are also a scaled-down version of a V-12 engine that made it through early production and road-testing before being scrapped as
Showdown Pits Engine Builders Against Themselves
For the 1,500 members of the cheering crowd, the battle was between two teams of professional engine builders, both of which have enjoyed great success building engines for some of NASCAR’s most popular – and successful – drivers. For Lanny Barnes and Mike Maiwald, though, the real challenge wasn’t to beat the other, but NOT
Sprint Car Motors
While the World of Outlaws, the All Stars, and USAC are the most well known of the sprint car racing organizations in this country, there are nearly fifty organizations that sanction sprint car racing. In addition, that doesn’t take into account the racetracks throughout the country that have their own division of sprint cars. Although
Rebuilding The Chrysler 2.7L
It was rated at 200 HP and it was originally used as the base motor in the Intrepid and Concorde, but it’s been the optional engine in the Stratus and Sebring since 2001 and it will be the standard engine in Chrysler’s new 300 sedan that’s coming out later this year. So, while there are
PERA’s Core Corner
During our research of the General Motors Gen III engine family we continued to run up against a stumbling block of exterior identification between the 4.8L and 5.3L engines. It seemed that no matter who we spoke with, be it core suppliers, wrecking yards, engineers or rebuilders, when asked how they differentiated between the 4.8L
What’s Wrong With Our Industry
What’s wrong with the engine building industry today? It’s a simple question that has no simple answer. Like many other – if not every – industry facing difficult times, the factors impacting this market are varied, complex and frustratingly hard to pin down. Are the woes of the industry the fault of customers or suppliers?
Rebuilding The Ford 2.0L
The old 1.9L was modified and upgraded in the process of making it into the 2.0L. The new engine was bored and stroked, it had siamesed cylinders that made the block stronger and quieter, the crank had four more counterweights that made it run smoother, and it had domed pistons for more compression. The
Where Should The Cam Bearing Oil Hole Be Located On A 3400 Series Cat Diesel?
A: The AERA Technical Committee offers the following information regarding cam bearing oil hole location for 3400 series Caterpillar diesel engines and installation of all cam bearings for these engines. This bulletin should be used, and service manuals published before 1985 should not be used. The correct location for the oil hole in the camshaft bearing
Heavy Duty Technology: Piston Failure Analysis
The air/fuel, coolant and oil systems and relationships between various engine operations and the cylinder liner temperatures are critical to maintaining proper operation of all cylinder components. A variety of conditions can cause excessive piston growth or melting, and each will cause varying results – including catastrophic engine failure. The correct air/fuel ratio balance of
A Kubota diesel engine for rebuild
Engine Builders: If you are considering a Kubota diesel engine for rebuild, the following specifications regarding compression pressures will be helpful. For your installer customers, this information will be useful in engine diagnosis. To obtain an accurate value of cranking compression, the engine should be operated until normal operating temperature is reached. If an engine
Rebuilding The Ford 3.8L Engine
They needed an economy engine that would fit in their new cars, and they needed it fast. They had a couple of old inline sixes and a small German V6, but none of them were designed for fuel economy or the coming emissions standards, and the 250 cid engine was so tall that it wouldn’t
Coretalk: September 2001
Ford Plans to Revamp Parts Distribution Network Ford Motor Co. is working to restructure and expand its United States parts distribution network to deliver service and repair parts to its dealers faster and more efficiently. Over the next three years, Ford plans to increase the number of parts distribution centers from 10 to 21, creating
Back to Basics: Preventing Piston Problems
Burned pistons. Scuffed pistons. Cracked pistons. These are problems no customer wants to experience in an engine you’ve built. Warranty claims can kill your business, so here are some tips on how to prevent these and other common piston problems. First and foremost, if you’re custom building an engine that has already suffered some kind
Heavy Duty Details: Damaged Main And Cam Bearing Saddles Can Be Successfully Repaired By Sleeving
The process is relatively easy to accomplish, and the repair is reliable How many times have you seen a block that is discarded because of damaged main saddles or cam bearing saddles? Numerous individuals try to have the block brazed or welded and then align bored. Because blocks require that they be completely heated to
Rebuilding the GM / Chevy 2.2L Engine
Unfortunately, this four cylinder, pushrod motor didn’t have nearly enough horsepower, so Buick, Oldsmobile and Pontiac all opted for the 1.8L SOHC Opel engine from Brazil for most of their “J” cars, and Chevy promptly made its new engine into a 2.0L/121 cid that delivered more power in 1983. The 2.0L was upgraded in 1987
Toyota 3SGTE Engine
First of all, one needs to realize that Toyota, like GM, Ford, etc., has engine “families”. However, rather than calling them names such as “big block” or “small block,” Toyota assigns them a letter code. The engine family code is the first letter (not the first numeral). The codes are as follows: A-series: 1.5L, 1.6L