R. L. Polk & Co. Reports Vehicle Age in U.S. on the Rise - Engine Builder Magazine

R. L. Polk & Co. Reports Vehicle Age in U.S. on the Rise

Median age of passenger cars in operation remained at 9.2 years in 2007, tying a record high in 2006, according to the vehicle population report released this week by R. L. Polk & Co.

The median age for trucks increased 5.8 percent to 7.3 years in 2007. Although registrations were down, the median age for light trucks in 2007 increased by 4.4 percent to 7.1 years, according to Polk’s findings.

"The median age of trucks, while still lower than cars, is starting to increase more now than in the recent past as the surge of pick-up trucks, SUVs and minivans purchased in the 1990s get older," said Mark Seng, vice president of Polk’s Aftermarket team.

The percentage of total passenger cars and trucks scrapped in 2007 was up slightly to 5.2 percent compared to 5 percent in 2006. The scrappage rate for passenger cars increased to 5.5 percent in 2007 from 4.9 percent.

"We continue to see increasing vehicle durability across all vehicle types regardless of last year’s increase in the scrappage rate for cars, light trucks and total vehicles," said Dave Goebel, consultant for Polk’s Aftermarket Solutions team. "In 2007, the percentage of the car population 11 years of age and older was 41.3 percent, compared to 40.9 percent in

2006. For light trucks, this percentage was 29.5 percent in 2007 and 29.2 percent in 2006."

Polk’s vehicle population report data is updated annually on July 1, following an in-depth analysis of more than 248 million vehicles.

For more information about Polk, visit: http://www.polk.com.

You May Also Like

NMRA/NMCA Announce Augustine Herrera as National Tech Director

ProMedia Events and Publishing, the parent company of the Holley NMRA Ford Nationals and NMCA Muscle Car Nationals, has announced Augustine Herrera as the new NMRA/NMCA National Tech Director. His duties include overseeing fair competition in both drag racing series and leading the on-site tech staff at all national events.  “Augustine joined our team in

ProMedia Events and Publishing, the parent company of the Holley NMRA Ford Nationals and NMCA Muscle Car Nationals, has announced Augustine Herrera as the new NMRA/NMCA National Tech Director. His duties include overseeing fair competition in both drag racing series and leading the on-site tech staff at all national events. 

Shop Solutions November 2021

Check out these Shop Solutions from builders across the country!

Cam Center
Holley Classic Truck Battery Tray and Hold Down

Holley Classic Trucks can battery trays for 1981-1987 C/K Series trucks and Blazer/Jimmy/Suburban manufactured to precisely mimic the factory look with all of the original holes and contours. Related Articles – Rocker Arm Tech – Part 1 – Automotive Specialty-Equipment Retail Sales Reach New High – Rebuilders Choice Made from heavy-gauge steel and EDP coated

Holley Battery Tray
Rocker Arm Tech – Part 1

In this episode of Steve Tech, Steve Morris breaks down the fundamentals of rocker arms, rocker arm stands and valvetrain rocker arm geometry. Class is in session! Related Articles – The SCAT Story – Numbers Don’t Tell The Whole Story – Performance Rocker Arms

Automotive Specialty-Equipment Retail Sales Reach New High

Despite what occurred throughout 2020, the specialty-equipment industry showed resilience with industry retail sales climbing from $46.2 billion to a new high of $47.89 billion in the U.S., according to the new 2021 SEMA Market Report. Related Articles – Future of Engine Building: Converting the Masses – Future of Engine Building: The Road Ahead for

Other Posts

COMP Performance Group Announces Plans for 2013 Power Tour

The Power Tour is considered one of the biggest and best road trips in the nation for performance enthusiasts. A variety of special events are scheduled throughout the week, including a highly anticipated cruise night in downtown Memphis (home of CPG) on the Tuesday, June 4. Related Articles – New AETC Website Debuts – PRW

New AETC Website Debuts

Each year AETCbrings together engine builders, racers, engineers and media members from around the world to exchange information on the day’s most popular engine-building topics. In an effort to make information about the conference even more accessible, AETChas recently launched an updated, easy-to-navigate website. Related Articles – Eaton Sponsors Western Michigan University Student Race Car

PRW Opens New Corporate Office and Warehouse Distribution Center

The PRW warehouse distribution center and corporate headquarters in now located in Perris, California. In addition to being designed to maximize storage and order shipping, the facility has an abundance of office space that houses the sales, management and support teams, an employee break room, conference rooms, and a larger engineering and product development department.

Melling, Dura-Bond Consolidate Sales and Marketing Efforts

Charles Barnett, vice president of sales and marketing at Dura-Bond Bearing Co., will be heading up the consoliated efforts between Dura-Bond and Melling. Barnett has been a long-term employee at the company as president prior to the Melling purchase several years ago. He also had a career with ACDelco/General Motors and previously served as general sales