APRA BIG R Show Opens Section for Heavy Duty Engine Suppliers - Engine Builder Magazine

APRA BIG R Show Opens Section for Heavy Duty Engine Suppliers

The Automotive Parts Remanufacturers Association (APRA) will open a section of the 2009 International BIG R Show for Heavy Duty Engine Suppliers so that engine remanufacturers in the heavy duty side of the business will be attracted to this new combined trade show. The 2009 International BIG R Show is being co-located with the ATRA Powertrain Expo on November 1-2, 2009 at the Riviera Hotel in Las Vegas just prior to the opening of the AAPEX and SEMA Shows and will offer emphasis on the diesel engine remanufacturing market.

During the recent HD Reman Summit in Orlando it was announced that APRA’s Heavy Duty Remanufacturing Group (HDRG) will undertake to provide a venue for diesel engine remanufacturers and distributors to meet and network among their peers. According to Bill Gager, APRA President, “The International BIG R Show is a natural place for the diesel engine community to meet for technical meetings and networking among all constituents of the remanufacturing marketplace.” Gager added, “The equipment suppliers to the diesel market and the distributors serving that market will also be able to share their needs and marketing expertise with the other product lines in the HDRG. The heavy duty transmission, axle and steering market use machining and cleaning equipment one might find in a diesel shop and vice-versa.”

The inclusion of the diesel engine market constituents into the BIG R Show was first suggested by several engine parts suppliers a couple of years ago. The needs of the remanufacturing industry to combine show facilities into one all-encompassing exhibit seemed to be a natural thing to do in today’s economy. Other avenues have largely gone untended and the HDRG Board felt it was time to step up and provide the resources necessary to provide a solution to the needs of the diesel engine market.

The recent agreement with ATRA provided impetus to proceed with the all-encompassing show. The larger remanufacturing community can be best served by combining the remanufacturing segments in this one location in Las Vegas just before an industry wide event such as Industry Week. ATRA, APRA and HDRG share many needs and this solution seems tailor-made to answer those needs.

An organizing committee consisting of HDRG and several diesel engine rebuilders/distributors and component manufacturers has been formed to facilitate the inclusion of the diesel engine market into The International BIG R Show. Exhibit space is now available for engine parts and equipment suppliers and information can be obtained from Bill Gager at [email protected] or by calling 703-968-2772 ext 103.  

For more information about the Big R Show visit www.apra.org.

You May Also Like

NMRA/NMCA Announce Augustine Herrera as National Tech Director

ProMedia Events and Publishing, the parent company of the Holley NMRA Ford Nationals and NMCA Muscle Car Nationals, has announced Augustine Herrera as the new NMRA/NMCA National Tech Director. His duties include overseeing fair competition in both drag racing series and leading the on-site tech staff at all national events.  “Augustine joined our team in

ProMedia Events and Publishing, the parent company of the Holley NMRA Ford Nationals and NMCA Muscle Car Nationals, has announced Augustine Herrera as the new NMRA/NMCA National Tech Director. His duties include overseeing fair competition in both drag racing series and leading the on-site tech staff at all national events. 

Shop Solutions November 2021

Check out these Shop Solutions from builders across the country!

Cam Center
Holley Classic Truck Battery Tray and Hold Down

Holley Classic Trucks can battery trays for 1981-1987 C/K Series trucks and Blazer/Jimmy/Suburban manufactured to precisely mimic the factory look with all of the original holes and contours. Related Articles – Rocker Arm Tech – Part 1 – Automotive Specialty-Equipment Retail Sales Reach New High – Rebuilders Choice Made from heavy-gauge steel and EDP coated

Holley Battery Tray
Rocker Arm Tech – Part 1

In this episode of Steve Tech, Steve Morris breaks down the fundamentals of rocker arms, rocker arm stands and valvetrain rocker arm geometry. Class is in session! Related Articles – The SCAT Story – Numbers Don’t Tell The Whole Story – Performance Rocker Arms

Automotive Specialty-Equipment Retail Sales Reach New High

Despite what occurred throughout 2020, the specialty-equipment industry showed resilience with industry retail sales climbing from $46.2 billion to a new high of $47.89 billion in the U.S., according to the new 2021 SEMA Market Report. Related Articles – Future of Engine Building: Converting the Masses – Future of Engine Building: The Road Ahead for

Other Posts

AAIA Offering Free Webinar on Health Care Reform Understanding the Impacts of the Affordable Care Act

This webinar contains vital information that will affect most everyone in the industry. Beginning in January 2014, many individuals will be required to have minimum essential health insurance coverage or pay a penalty (an individual mandate). Certain employers with more than 50 full-time equivalents that do not offer qualified health insurance, or offer unaffordable coverage,

New AETC Website Debuts

Each year AETCbrings together engine builders, racers, engineers and media members from around the world to exchange information on the day’s most popular engine-building topics. In an effort to make information about the conference even more accessible, AETChas recently launched an updated, easy-to-navigate website. Related Articles – IMSC Receives Legislative Approval of Motorsports Initiative –

PRW Opens New Corporate Office and Warehouse Distribution Center

The PRW warehouse distribution center and corporate headquarters in now located in Perris, California. In addition to being designed to maximize storage and order shipping, the facility has an abundance of office space that houses the sales, management and support teams, an employee break room, conference rooms, and a larger engineering and product development department.

Melling, Dura-Bond Consolidate Sales and Marketing Efforts

Charles Barnett, vice president of sales and marketing at Dura-Bond Bearing Co., will be heading up the consoliated efforts between Dura-Bond and Melling. Barnett has been a long-term employee at the company as president prior to the Melling purchase several years ago. He also had a career with ACDelco/General Motors and previously served as general sales