HDAW'10 Anticipating More Than 1,700 One-on-One Supplier and Distributor Meetings - Engine Builder Magazine

HDAW’10 Anticipating More Than 1,700 One-on-One Supplier and Distributor Meetings

Heavy Duty Aftermarket Week ’10 has successfully registered a
conference-record 110 suppliers and 70 distributors for pre-scheduled,
one-on-one meetings during the January 2010 conference.

 

HDAW ’10 will be held Monday, Jan. 18 through Thursday, Jan. 21, 2010, at the Mirage in Las Vegas,

 

During HDAW ‘09, distributor and supplier companies participated in
1,409 scheduled meetings. One-on-one meeting participation is limited
to suppliers that are members of one of the sponsoring organizations
and have registered and reserved exhibit space at HDAW ’10.  

 

“We have had a great response for the One-on-One Meetings this year,
and are in the process of putting the requested matches together to get
out to the distributors and suppliers by the end of December,” said
Dave Bell, HDAW’10 co-chair. “We are anticipating a very well attended
and successful conference again in 2010.”

 

Heavy Duty Aftermarket Week is the largest North American gathering of
the independent heavy-duty industry. More than 1,400 managers and
executives from 17 countries – including distributors, manufacturers,
service providers, educators and media – attended the 2009 conference
in Orlando.

 

HDAW is presented by a joint operating committee composed of industry
leaders from American Council of Frame and Alignment Specialists
(ACOFAS), Commercial Vehicle Solutions Network (CVSN), Heavy Duty
America (HDA), Heavy Duty Distribution Association (HDDA), Heavy Duty
Manufacturers Association (HDMA), APRA’s Heavy Duty Remanufacturing
Group (HDRG), International Truck Parts Association (ITPA), Overseas
Automotive Council (OAC), Power Heavy Duty, Service Specialists
Association (SSA), Truck Pride, Truck Frame and Axle Repair Association
(TARA) and VIPAR Heavy Duty.

 

To register, visit www.hdaw.org.

You May Also Like

NMRA/NMCA Announce Augustine Herrera as National Tech Director

ProMedia Events and Publishing, the parent company of the Holley NMRA Ford Nationals and NMCA Muscle Car Nationals, has announced Augustine Herrera as the new NMRA/NMCA National Tech Director. His duties include overseeing fair competition in both drag racing series and leading the on-site tech staff at all national events.  “Augustine joined our team in

ProMedia Events and Publishing, the parent company of the Holley NMRA Ford Nationals and NMCA Muscle Car Nationals, has announced Augustine Herrera as the new NMRA/NMCA National Tech Director. His duties include overseeing fair competition in both drag racing series and leading the on-site tech staff at all national events. 

Shop Solutions November 2021

Check out these Shop Solutions from builders across the country!

Cam Center
Holley Classic Truck Battery Tray and Hold Down

Holley Classic Trucks can battery trays for 1981-1987 C/K Series trucks and Blazer/Jimmy/Suburban manufactured to precisely mimic the factory look with all of the original holes and contours. Related Articles – Rocker Arm Tech – Part 1 – Automotive Specialty-Equipment Retail Sales Reach New High – Rebuilders Choice Made from heavy-gauge steel and EDP coated

Holley Battery Tray
Rocker Arm Tech – Part 1

In this episode of Steve Tech, Steve Morris breaks down the fundamentals of rocker arms, rocker arm stands and valvetrain rocker arm geometry. Class is in session! Related Articles – The SCAT Story – Numbers Don’t Tell The Whole Story – Performance Rocker Arms

Automotive Specialty-Equipment Retail Sales Reach New High

Despite what occurred throughout 2020, the specialty-equipment industry showed resilience with industry retail sales climbing from $46.2 billion to a new high of $47.89 billion in the U.S., according to the new 2021 SEMA Market Report. Related Articles – Future of Engine Building: Converting the Masses – Future of Engine Building: The Road Ahead for

Other Posts
COMP Performance Group Announces Plans for 2013 Power Tour

The Power Tour is considered one of the biggest and best road trips in the nation for performance enthusiasts. A variety of special events are scheduled throughout the week, including a highly anticipated cruise night in downtown Memphis (home of CPG) on the Tuesday, June 4. Related Articles – New AETC Website Debuts – PRW

New AETC Website Debuts

Each year AETCbrings together engine builders, racers, engineers and media members from around the world to exchange information on the day’s most popular engine-building topics. In an effort to make information about the conference even more accessible, AETChas recently launched an updated, easy-to-navigate website. Related Articles – Eaton Sponsors Western Michigan University Student Race Car

PRW Opens New Corporate Office and Warehouse Distribution Center

The PRW warehouse distribution center and corporate headquarters in now located in Perris, California. In addition to being designed to maximize storage and order shipping, the facility has an abundance of office space that houses the sales, management and support teams, an employee break room, conference rooms, and a larger engineering and product development department.

Melling, Dura-Bond Consolidate Sales and Marketing Efforts

Charles Barnett, vice president of sales and marketing at Dura-Bond Bearing Co., will be heading up the consoliated efforts between Dura-Bond and Melling. Barnett has been a long-term employee at the company as president prior to the Melling purchase several years ago. He also had a career with ACDelco/General Motors and previously served as general sales