Amsoil Heavy-Duty Metal Protector - Engine Builder Magazine

Amsoil Heavy-Duty Metal Protector

AMSOIL Heavy-Duty Metal Protector has been reformulated to offer improved performance as a corrosion inhibitor. Its quick-drying, long-lasting formula effectively protects metal surfaces that are exposed to the damaging effects of salt, moisture or chemical corrosion.

AMSOIL Heavy-Duty Metal Protector has been reformulated to offer improved performance as a corrosion inhibitor. Its quick-drying, long-lasting formula effectively protects metal surfaces that are exposed to the damaging effects of salt, moisture or chemical corrosion. It displaces water and resists dirt to promote longer equipment life.

AMSOIL Heavy-Duty Metal Protector is ideal for steel, iron, aluminum, brass, copper and other metal surfaces frequently subjected to water, dirt or road salt. It is suitable for use as an automotive or trailer undercoat, on spare tire carriers, battery terminals, hinges, handheld tools, snow plows, mower decks and blades, snowblowers, skid-steer attachments, farm machinery, fork lifts, metal gates/fences, bike chains and more.

Available in convenient 16-ounce spray cans, AMSOIL Heavy-Duty Metal Protector delivers a consistent spray on hard-to-reach places, leaving a dry, long-lasting, wax-like film that does not sling off.

For more information: www.amsoil.com.

You May Also Like

Summit Has RaceTec Pistons

With almost 1,300 configurations available, Summit Racing has the RaceTec Racing or AutoTec piston that fits your engine build.

With almost 1,300 configurations available, chances are good Summit Racing has the RaceTec Racing or AutoTec piston that fits your engine build. It’s like getting custom pistons right off the shelf.

AutoTec PistonsAutoTec Pistons are forged from low-expansion 4032 aluminum alloy to maintain tighter piston-to-wall clearances. That means better cylinder sealing, lower cylinder wear, and OEM noise levels, making them ideal for street and lightly boosted applications. Features include:• CNC-diamond turned skirts• CNC-machined ring grooves• Top ring land gas distribution grooves to enhance performance and improve ring seal • Broached double pin oilers• Wristpins, wire locks, and ring set included

Point One Small Block Chevy Head Studs

Point One’s E190 head studs boast an impressive 190,000psi nominal tensile strength and are made from grade 8740 steel sourced only from US mills.

LSX Oil Pump Mounting Brackets from Peterson Fluid Systems

Kits include all necessary hardware for mounting oil pumps to the engine block.

Hot Shot’s Secret Stiction Eliminator

Hot Shot’s Secret Stiction Eliminator is engineered to remove stiction, the sludge and varnish created from burnt oil, while also lubricating.

Howards Cams Track Smart Forged H-Beam Connecting Rods

Designed for serious street and sportsman race engines, these H-beam rods are forged and CNC-machined from certified 4340 high tensile steel.

Other Posts

Compound Turbocharged 6.0L Powerstroke Engine

Eric McMichael of McMichael’s Diesel Performance is a Ford guy through and through. His passion for the Blue Oval shines bright in his 2004 F-250, which features a compound-turbo 6.0L Powerstroke engine. Check it oit!

Wagler’s New Billet Duramax for Drag-and-Drive

Jeremy Wagler and his team at Wagler Competition Products have become well-known for their diesel work, and specifically the shop’s enhancements for Duramax engines. Well, Jeremy and his team have taken another step forward by introducing an all-billet Duramax geared for drag-and-drive competition. We caught up with Jeremy at PRI 2023 to get the full

Compound-Turbo 6.0L Powerstroke Engine

Justin Gerebizza acquired a fully built ‘06 F-350 looking to achieve the 1,000-hp mark with a compound-turbo 6.0L Powerstroke engine. This Diesel of the Week is even more impressive when you realize it was built in 2015.

Supertech Sodium-Filled Valves

These Supertech valves offer a significant reduction in valve head temperatures for today’s turbo engines.