6M-3L MSD Marine Ignition - Engine Builder Magazine

6M-3L MSD Marine Ignition

Holley/MSD has announced the release of the 6M-3L MSD Marine Ignition, a fully sealed unit with a single wiring connector for a fast, hassle-free installation.

Holley/MSD has announced the release of the 6M-3L MSD Marine Ignition, a fully sealed unit with a single wiring connector for a fast, hassle-free installation. Three rotary dials and an LED display simplify setting the cylinder select, adjustable start retard, and rev-limiter and make plug-in rev-limiter chips and hard-to-read dials a thing of the past.

Compatible with 4-, 6-, and 8-cylinder engines, this capacitive-discharge ignition multi-sparks from 0 to 3,000 rpm for a clean idle and quick throttle response, and capacitive-discharge sparks run from 3,000 rpm all the way up to 12,000 rpm. A large, easy-to-read LED display shows the rev limit, highest rpm turned, cylinder select, start retard, and battery voltage, and it can be set to a live-tach mode on V8s with just the turn of a knob.

The 6M-3L MSD Marine Ignition can be triggered by magnetic pickup, amplifier, and points inputs and records the highest rpm the engine has revved for the past 20 minutes of run time. It delivers spark energy down to 6 volts of battery supply, features a fully potted housing to withstand demanding marine conditions, and the built-in start retard is adjustable in 0-, 10-, or 20-degree increments.

You May Also Like

Accessory Stud Kits From ARP

All ARP fasteners are manufactured in-house at California facilities to the industry’s highest standards.

ARP’s unique accessory studs with a rounded “nut starter” nose are available for an ever-increasing variety of applications. These include specially designed studs for securing bellhousings, carburetors, distributors, headers, timing covers, valve covers and more. An important benefit of using studs is being able to accurately position gaskets and hold them in place during the assembly process.

BoostLine Connecting Rods for Nissan VQ37

The patented 3-pocket design was specifically engineered for demanding turbocharged, supercharged and nitrous applications.

Diamond Pistons’ Toyota 3UR-FE Piston Kits

Toyota’s 3UR-FE engine came to the market in 2007, and has since been a workhorse. As such, Diamond Pistons has announced a 3UR-FE piston kit.

Howell EFI Wiring Harnesses

Reprogramming of the existing ECM or ECM module supplied by Howell is required. ECM’s are reprogrammed to the vehicle’s engine and transmission specifications; i.e. gear ratios, tire size, cam changes, vehicle anti-theft (VAT’s) removal, etc. 

Precision Racing Components’ 5 Stage Sprint Car Oil Pump

The pump features a unique pressure gear design along with true helical scavenge rotors giving PRC’s oil pumps a competitive advantage.

Other Posts

PWR LSA Intercooler for 2012-’15 Camaro ZL1

Paired with PWR’s heat exchanger upgrade, this brick can support any high-horsepower build and keep your car at its coolest.

Jesel Sportsman Roller Lifters

From mild drag engines, street/strip builds, pleasure boats to circle track, these lifters will give you bulletproof performance.

Turbosmart’s Boost Tee Manual Boost Controllers

Now featuring a 33% smaller, more ergonomic design, these boost controllers incorporate the same functionality that made it a crowd favorite.

Elgin’s LSX 376 Camshaft

Elgin has introduced two LS camshafts with its 480 Hot Cam and 515/525 ASA camshafts.