Holley NOS Dry Nitrous Plates - Engine Builder Magazine

Holley NOS Dry Nitrous Plates

Holley has announced the release of NOS Dry Nitrous Plates for Sniper EFI Fabricated Intake Manifolds and LS Hi-Ram EFI Intake Manifolds, which "sandwich" between the top plate and bottom base plate.

Holley has announced the release of NOS Dry Nitrous Plates for Sniper EFI Fabricated Intake Manifolds and LS Hi-Ram EFI Intake Manifolds, which “sandwich” between the top plate and bottom base plate.

The Sniper versions (above) are precision-machined .125-inch passages that spray through eight .040-inch openings into the center of each intake runner for optimum nitrous distribution and maximum power. They are available in your choice of black-anodized or clear finish.

The Holley Hi-Ram LS manifold versions (above) are a one-piece configuration with specially designed .103-inch passages machined into the billet 6061-T6 aluminum plate that precisely spray through eight .040-inch openings into the center of each intake runner for optimum nitrous distribution and maximum power.

These plates come with jetting for 50, 100, 150, 200, and 250 additional horsepower, but can easily handle up to 1000+ horsepower with the appropriate jetting. Their design eliminates broken, spun, and misaligned spray bars. These kits include everything you need to upgrade to nitrous: the plate itself, a gasket designed just for it, jet holders, and all the hardware for a fast, easy installation.

For full product details:
Sniper
•  Black NOS Dry Nitrous Plates
•  Silver NOS Dry Nitrous Plates

Hi-Ram

•  NOS Dry Nitrous Plate (black)
•  NOS Dry Nitrous Plate (silver)

You May Also Like

CP-Carrillo Pistons and Rods for VW/Audi

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels.

CP-Carrillo offers #SC7630 pistons and rods for the Volkswagen/Audi EA888 Gen III 2.0L TSI/TFSI engine. This engine is in numerous applications, including the VW Golf Mk7 R, Audi S3 and Audi TTS vehicles.

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels to take your engine to the next level. The pistons are made to accept 1mm larger valves, as well as deeper valve pockets to accommodate many aftermarket cams.

Eneos Racing Pro 10w-50 Oil

With Racing Pro 10w-50, a 50/50 ester mix provides exceptional wear protection, extra high horsepower, and further anti-oxidation stability.

Eneos 10w-50 motor oil
Fluidampr Performance Damper for Mazda Miata

Fluidampr performance dampers protect your engine from destructive crankshaft torsional vibration.

Fluidampr Mazda Miata damper
Mahle PowerPak Pistons for 6.0L and 6.4L Powerstroke Engines

All four sets offer incredible versatility, allowing a daily driver to become a weekend warrior for drag, dyno, or pulling competitions.

Point One Small Block Chevy Head Stud Kit

Point One’s E190 head studs boast an impressive 190,000 psi nominal tensile strength.

Cadillac Supercharged LS engine

Other Posts

Weinle Motorsports Sheet Metal Intakes

These custom aluminum sheet metal intakes are built to your specs.

Peterson Fluid Systems’ Fat Boy Dirt Late Model Oil Tank

Peterson Fluid Systems’ new 08-0919 Fat Boy Dirt Late Model Oil Tank provides engine builders with more oil capacity when chassis space is limited. With a lower profile design and all the standard features of their race-proven DLM tanks, this tank is 18.62” tall with a 5-gallon capacity. Related Articles – Total Seal Severe-Duty High-Performance Diesel Rings

Total Seal Severe-Duty High-Performance Diesel Rings

New Total Seal diesel ring sets are available for Cummins 5.9L and 6.7L, Duramax 6.6L, Powerstroke 6.4L to 7.3L, and custom sets.

K1 Toyota Supra / BMW B58 Connecting Rods

Forged from 4340 steel and machined within precise tolerances, these connecting rods for the B58 boast a winning combination of features.