Fass Titanium Signature Series Diesel Fuel Lift Pump - Engine Builder Magazine

Fass Titanium Signature Series Diesel Fuel Lift Pump

The Signature Series FASS Diesel Fuel System has reduced noise to a “whisper,” while at the same time increasing fuel flow rates.

The Titanium Signature Series diesel fuel pumps are a superior fuel pump and filtration system. FASS Fuel Systems has a less than 2% failure rating with its motor and a design that implements unique features.

  • FASS Whisper Technology (FWT) was engineered to meet the stringent demands of today’s quiet diesel engines. FASS Whisper Technology effectively and drastically reduces the sound levels of the Signature Series FASS Diesel Fuel System to a “whisper,” while at the same time increasing fuel flow rates.
  • Performance Radius Cuts (PRC) are an advanced machining technique used to improve the flow of fuel through the FASS System by creating smooth flowing cuts within the aluminum housing. This prevents the reintroduction of air and vapor back into the fuel and to prevent eddy currents from forming within the corner of a 90-degree sharp angle. FASS Titanium Signature Fuel Systems are the only Fuel Air Separation System that incorporates these exclusive Performance Radius Cuts.
  • Mass Flow Return (MFR) technology is used to continually polish your fuel by keeping a positive pressure on the fuel being delivered to the engine to prevent cavitation along with galling and scoring. Then returning the fuel, that’s not yet needed, back to the tank after it has been passed through the filtration process, removing dirt, air, vapor and water. This means your fuel is being constantly “Polished” (cleaned), guaranteeing that your diesel truck always has the cleanest fuel possible. The MFR in combination with the optional FASS Fuel Heater options will help insure cold weather operations.
  • Bolt-On Bracket Mounts have now been simplified with the new bolt-on brackets that utilize your Ford Super Duty factory bed bolt, the bolt that secures your truck bed to your frame. Mounting your Titanium Signature Series lift pump takes only minutes and all brackets are made from machined steel for superior support and strength.

You May Also Like

Arrow Pit Carts

Arrow has standard configurations available as well as options that can be fine-tuned to suit your needs.

The original design of Arrow Pit Carts were to avoid having multiple sets of tools. It was an easy way of transporting a full set of tools in and out of the trailer to the shop. Arrow has standard configurations available as well as options that can be fine-tuned to suit your needs.

Silver Seal Stainless Steel Engine Oiler

It features a larger capacity 2-gallon stainless steel tank and large easy-to-fill cap.

engine oiler
Graymills CTU SonicMAX Ultrasonic Cleaning System

The console’s small footprint make these units ideal for job site “cell” cleaning applications or where space is critical.

graymills cleaning
ETL Performance Products’ Universal Intercooler

This universal intercooler core is made of aluminum with a polished finish. It features a 31″ width, 11.7″ height, a 3″ thick inlet size.

Goodson & Fast Forward Race Engines’ Main Cap Pullers

Goodson partnered with Fast Forward Race Engines to bring you these main cap pullers for Coyote, Hemi and LS engines.

Other Posts

First-of-its-Kind Compound-Turbo L5P Duramax Engine

While incredibly rewarding, nothing about this L5P Duramax build was easy for Lead Foot Diesel Performance – everything was custom or a first. From the billet crank to the one-off compound turbos, this L5P Duramax is impressive. Check it out!

L5P Duramax engine
Logan Yelton’s Turbocharged 5.9L 12-Valve Cummins Engine

During last year’s Ultimate Callout Challenge, Logan Yelton’s ’93 Dodge truck stood out as we walked through the pit area. We got a chance to speak with Logan about his company Loganbuilt and the 5.9L 12-valve Cummins engine under the hood of his vintage Dodge truck. See what went into the build in this Diesel

Turbocharged 5.9L VP44 Cummins Engine

A few years ago, Jordan Blackard stumbled upon a 2nd Gen 2001 Ram 2500 that was being sold by Chase Fleece of Fleece Performance. After a few years of casual driving and fixing it up, he decided in 2022 to get working on a race build featuring a 5.9L VP44 Cummins engine. Check it out!

Diesel Daydreams at R&R Engine and Machine

We’ve know R&R Engine and Machine owner Bryan Menke for quite some time. He’s just down the road from our HQ in Akron, OH, so we recently stopped in to see what was new at the shop, which specializes in light, medium and heavy-duty diesel engine work. There’s literally nothing R&R can’t handle, so check