MAHLE Motorsport Ford Coyote/Voodoo PowerPak Plus Piston Kit - Engine Builder Magazine

MAHLE Motorsport Ford Coyote/Voodoo PowerPak Plus Piston Kit

The all forged replacement piston kit utilizes a low silicon 2618 alloy for high load, high stress applications and has a combined dome pocket geometry.

Mustang and F-150 racers and enthusiasts can now indulge in their quest for more power with the introduction of MAHLE Motorsport’s Ford 5.0L modular 4-valve Coyote/Voodoo PowerPak Plus Piston Kit. Manufactured to be a complete drop-in assembly piston kit for either the Ford V8 Coyote or Voodoo engine, this kit allows for more buildable horsepower for stock or modified Coyote or Voodoo engines. 

The all forged replacement piston kit utilizes a low silicon 2618 alloy for high load, high stress applications and has a combined dome pocket geometry, which is great news for race engine builders seeking to add power to the powerhouse Shelby GT350 or GT350R. Developed with a 1.167 compression height, however additional PowerPak sets are offered in lower compression and higher compression designs. 

Designed to be lightweight, the pistons weigh 112 grams each and are dual coated with phosphate and MAHLE’s proprietary GRAFAL coating for reduced drag and wear. This kit features hard anodized top ring grooves for maximum durability and for added protection against heat generated microwelding that can result in a loss of power or cause piston failure. This powerhouse PowerPak Plus Piston Kit includes a 1.2, 1.2, 2.5mm file fit performance ring set and eight 22mm x 13mm x 58.11mm pins.

For more information: MahleMotorsports.com or call 888-255-1942.

You May Also Like

Summit Racing Camshaft Bearing Bore Alignment Tool

The Summit Racing Cam Bearing Alignment Tool fits Gen III and Gen IV LS engines.

cam bearing tool

When you’re installing new cam bearings in an LS engine block, the first four (from back to front of the engine) are usually no problem. That’s because the block helps keep the cam bearing installation tool centered in the bearing bores. But when it comes to the front cam bearing, there is nothing to keep the installation tool centered in the bore. That means the chances of that bearing going in cockeyed are pretty high.

Kaase Racing Engines’ P-51d Cylinder Heads

Kaase Racing Engines’ new P-51d cylinder head includes concepts developed from three years of revisions and testing.

Elgin Chrysler Hemi Engine Hydraulic Lifter/Guide Assemblies

Elgin Pro-Stock OE-quality hydraulic roller lifter/guide assemblies for 2004-newer Chrysler Hemi engines without MDS cylinder deactivation.

Isky Dual Valve Spring Set

These sets feature drop-in installation and are wound from chrome silicon wire.

Holley’s Sniper 2 EFI Platform Gains Bluetooth Capability

Tech advancement brings even greater affordability and ease of use to Holley’s popular Sniper 2 EFI ecosystem.

Other Posts

UEM Celebrates more than a Century of Piston Manufacturing

United Engine and Machine is celebrating over a century of piston manufacturing with a history of innovation, quality and family values.

Inside the Coyote Den of Fast Forward Race Engines

Fast Forward Race Engines and shop owners Joe and Gina Irwin have been making big horsepower and well-performing engines for quite some time. Recently, the shop’s Coyote engine program has been gaining notoriety thanks to the work the shop does in conjunction with Brett LaSala and his record-setting Snot Rocket Mustang. That twin-turbo 5.0L Coyote

Klotz Announces 2024 Product Catalog

By the time Klotz products reach your engine, it’s spent countless hours on the dyno and proven on the racetrack.

Pakelo Racing Transmission DLS A Lubricant

This product is Pakelo’s baseline IndyCar gearbox lubricant. It provides outstanding performance and greatly reduces drivetrain loss.