Holley Sniper EFI Fuel Tank Modules - Engine Builder Magazine

Holley Sniper EFI Fuel Tank Modules

If you are upgrading your ride to EFI, be sure to check out the OE Style 350 LPH EFI Fuel Pump Modules.

The Sniper EFI OE-Style 350 LPH EFI Fuel Tank Modules are a direct replacement that will fit your factory fuel tank, taking the guesswork out of your fuel system conversion.

Able to flow 350 liters per hour (LPH) and capable of supporting up to 750 horsepower, the fuel pressure is internally regulated to 58 psi, eliminating the expense of purchasing and installing an outside fuel regulator. The module also features a Hydramat filter, which protects against contaminates while keeping fuel available at the pick-up.

New applications include:

  • 1967-1969 GM F-Body
  • 1970-1973 GM F-Body
  • 1974-1981 GM F-Body
  • 1964-1967 GM A-Body
  • 1968-1972 GM A-Body
  • 1964-1968 Ford Mustang
  • 1978-1987 GM G-Body
  • 1973-1986 Jeep CJ (15-gallon steel tank)
  • 1973-1987 GM C/K Trucks
  • 1955-1957 Chevrolet car
  • 1963-1967 Chevrolet Corvette

For more info: https://www.holley.com/

You May Also Like

CP-Carrillo Pistons and Rods for VW/Audi

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels.

CP-Carrillo offers #SC7630 pistons and rods for the Volkswagen/Audi EA888 Gen III 2.0L TSI/TFSI engine. This engine is in numerous applications, including the VW Golf Mk7 R, Audi S3 and Audi TTS vehicles.

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels to take your engine to the next level. The pistons are made to accept 1mm larger valves, as well as deeper valve pockets to accommodate many aftermarket cams.

Eneos Racing Pro 10w-50 Oil

With Racing Pro 10w-50, a 50/50 ester mix provides exceptional wear protection, extra high horsepower, and further anti-oxidation stability.

Eneos 10w-50 motor oil
Fluidampr Performance Damper for Mazda Miata

Fluidampr performance dampers protect your engine from destructive crankshaft torsional vibration.

Fluidampr Mazda Miata damper
Mahle PowerPak Pistons for 6.0L and 6.4L Powerstroke Engines

All four sets offer incredible versatility, allowing a daily driver to become a weekend warrior for drag, dyno, or pulling competitions.

Point One Small Block Chevy Head Stud Kit

Point One’s E190 head studs boast an impressive 190,000 psi nominal tensile strength.

Cadillac Supercharged LS engine

Other Posts

Weinle Motorsports Sheet Metal Intakes

These custom aluminum sheet metal intakes are built to your specs.

Peterson Fluid Systems’ Fat Boy Dirt Late Model Oil Tank

Peterson Fluid Systems’ new 08-0919 Fat Boy Dirt Late Model Oil Tank provides engine builders with more oil capacity when chassis space is limited. With a lower profile design and all the standard features of their race-proven DLM tanks, this tank is 18.62” tall with a 5-gallon capacity. Related Articles – Total Seal Severe-Duty High-Performance Diesel Rings

Total Seal Severe-Duty High-Performance Diesel Rings

New Total Seal diesel ring sets are available for Cummins 5.9L and 6.7L, Duramax 6.6L, Powerstroke 6.4L to 7.3L, and custom sets.

K1 Toyota Supra / BMW B58 Connecting Rods

Forged from 4340 steel and machined within precise tolerances, these connecting rods for the B58 boast a winning combination of features.