Aeromotive Phantom Drop-In Fuel Pump Modules for 2008-20 Subaru WRX and STI Models - Engine Builder Magazine

Aeromotive Phantom Drop-In Fuel Pump Modules for 2008-20 Subaru WRX and STI Models

These fuel pump modules can support naturally-aspirated gasoline applications for a variety of horsepower ranges.

Aeromotive has introduced new Phantom Direct Drop-In Fuel Pump Modules for the 2008-20 Subaru WRX and STI models. These Direct Drop-In Fuel Pump Modules are available with a single 450 liter-per-hour pump or single or dual 340 liter-per-hour pumps and come preassembled for a quick and simple installation. 

The new Direct Drop-In Fuel Pump Modules for Subaru WRX and STI models work with the factory fuel tank utilizing the OEM lock ring, gasket and fuel level sender to further simplify installation. Each pump incorporates Aeromotive’s patented Jet Siphon system with foam and bladder technology to control fuel slosh and maximize fuel pickup. The modules also feature a factory-sized outlet cap with a single -06 ORB outlet port to maintain OEM fitment and require the use of a return-style regulator and return line.

Pump modules are available with either single (Part# 18080) or dual (Part# 18082) 340 liter-per-hour pumps or as a single 450 liter-per-hour (Part# 18081) module. The single 340 modules can support naturally-aspirated gasoline applications up to 725 horsepower or 505 horsepower with E85, and forced-induction gasoline applications up to 595 horsepower or 415 horsepower with E85. The single 450 liter-per-hour pump modules can handle naturally-aspirated gasoline applications up to 975 horsepower (660 with E85) and forced-induction gasoline applications up to 700 horsepower (485 with E85). The dual 340 liter-per-hour pump modules provide enough fuel for naturally-aspirated gasoline applications up to 1,575 horsepower, naturally-aspirated E-85 ethanol applications up to 1,100 horsepower, forced-induction gasoline applications up to 1,295 horsepower and forced-induction E-85 ethanol applications up to 905 horsepower. All horsepower numbers are based on motors running electronic fuel injection.

Aeromotive’s fuel pump modules are preassembled with the pump configuration of choice and are covered by Aeromotive’s limited one-year warranty. For more information on Stealth Series fuel systems and other Aeromotive products, visit AeromotiveInc.com.

You May Also Like

CP-Carrillo Pistons and Rods for VW/Audi

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels.

CP-Carrillo offers #SC7630 pistons and rods for the Volkswagen/Audi EA888 Gen III 2.0L TSI/TFSI engine. This engine is in numerous applications, including the VW Golf Mk7 R, Audi S3 and Audi TTS vehicles.

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels to take your engine to the next level. The pistons are made to accept 1mm larger valves, as well as deeper valve pockets to accommodate many aftermarket cams.

Eneos Racing Pro 10w-50 Oil

With Racing Pro 10w-50, a 50/50 ester mix provides exceptional wear protection, extra high horsepower, and further anti-oxidation stability.

Eneos 10w-50 motor oil
Fluidampr Performance Damper for Mazda Miata

Fluidampr performance dampers protect your engine from destructive crankshaft torsional vibration.

Fluidampr Mazda Miata damper
Mahle PowerPak Pistons for 6.0L and 6.4L Powerstroke Engines

All four sets offer incredible versatility, allowing a daily driver to become a weekend warrior for drag, dyno, or pulling competitions.

Point One Small Block Chevy Head Stud Kit

Point One’s E190 head studs boast an impressive 190,000 psi nominal tensile strength.

Cadillac Supercharged LS engine

Other Posts

New Study Shows Feasibility of Liquid Propane Direct Injection Engines

Research study shows new technology can enable widespread production and commercialization of lower-carbon lifecycle medium-duty LPG engines.

Weinle Motorsports Sheet Metal Intakes

These custom aluminum sheet metal intakes are built to your specs.

Peterson Fluid Systems’ Fat Boy Dirt Late Model Oil Tank

Peterson Fluid Systems’ new 08-0919 Fat Boy Dirt Late Model Oil Tank provides engine builders with more oil capacity when chassis space is limited. With a lower profile design and all the standard features of their race-proven DLM tanks, this tank is 18.62” tall with a 5-gallon capacity. Related Articles – Total Seal Severe-Duty High-Performance Diesel Rings

Total Seal Severe-Duty High-Performance Diesel Rings

New Total Seal diesel ring sets are available for Cummins 5.9L and 6.7L, Duramax 6.6L, Powerstroke 6.4L to 7.3L, and custom sets.