Diamond -2K Series Pistons for 6.2L and 6.4L Hemi Engines - Engine Builder Magazine

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Engine Builder Magazine Logo
Content for engine professionals and enthusiasts
Products

Diamond -2K Series Pistons for 6.2L and 6.4L Hemi Engines

These Hemi pistons are made from 2618 material for high horsepower, boosted applications and are rated for 2,000 HP.

Engine Builder
By Engine Builder
Published:

Diamond’s Hemi -2K Series for 6.2L and 6.4L Engines provide a variety of features. Included are 3D milling on piston crowns for ready to install finish; Inboard forging design with fully machined under crown for maximum strength; Valve pockets designed to work with 6.2L Hellcat cylinder heads; Side gas ports for better ring seal; Moly skirt coating for friction loss and skirt wear protection, and more.

Related Articles

These pistons feature a top ring down dimension of .250″ 1.050cd .300″ 1.275cd. The ratios are figured for a .040″ head gasket @ 9.280″ deck. Each piston set features a premium 1.5mm x 1.5mm x 3.0mm ring package and premium H-13 .250W wrist pins chamfered for round wire locks. The valve pocket depth is 0.130″ intake and sym exhaust.

These Hemi pistons are made from 2618 material for high horsepower, boosted applications and are rated for 2,000 HP. For more info: https://diamondracing.net/

You May Also Like

Products

CP-Carrillo Kawasaki Teryx KRX1000 Pistons and Rods

Both pistons and rods are available off the shelf and include custom features incorporating CP-Carrillo high standards and consistent quality.

Greg Jones
By Greg Jones
Greg Jones is Content Director and Editor of Engine Builder Magazine.
Published:

CP-Carrillo is highlighting its 2020 Kawasaki Teryx KRX1000 pistons and rods for the Kawasaki ATV/UTV turbo and naturally aspirated engines. Part #M3040 features a 92mm stock bore and 9.5:1 compression turbo piston, while part #M3041 features a 92mm stock bore and 12:1 naturally aspirated piston. Part #13220 are the connecting rods.

Read Full Article

More Products Posts
Plazmaman 5-Inch PRO Billet Throttle Body

Plazmaman’s PRO billet throttle body is designed for 3,000-plus horsepower.

By Greg Jones
Summit Racing Race Series Carburetors

This 750 cfm four-barrel carburetor is ideal for drag racing and street/strip applications.

By Greg Jones
MAHLE PowerPak Pistons for Big Block Mopar Engines

These new shelf-stocked PowerPak piston sets from MAHLE are for the 383 and 400 B series and 440 RB series Mopar engines.

By Greg Jones
Hot Shot’s Secret Green Diamond 0W-20 Light-Duty Diesel Oil

Hot Shot’s Secret Green Diamond is formulated for use in GM Duramax 2.7 and 3.0 diesel engines that require Dexos D 0W-20 specification.

By Greg Jones

Other Posts

Inside the Coyote Den of Fast Forward Race Engines

Fast Forward Race Engines and shop owners Joe and Gina Irwin have been making big horsepower and well-performing engines for quite some time. Recently, the shop’s Coyote engine program has been gaining notoriety thanks to the work the shop does in conjunction with Brett LaSala and his record-setting Snot Rocket Mustang. That twin-turbo 5.0L Coyote

By Greg Jones
Turbocharged 5.9L Cummins Engine

At Back Bay Diesel Performance, repair and performance work are taken very seriously. Those capabilities are often showcased through custom shop builds, like shop owner Adam Nichols’ own turbocharged 5.9L Cummins engine for his personal drag truck. Check it out!

By Evan Laux
540 cid Small Block John Deere Light Pro Stock Engine

When it comes to PRI booth engines, Fluidampr has been a great booth to visit over the last couple years, and at the 2023 show the company had a VG Motorsports-built small block John Deere Light Pro Stock engine on display that definitely stopped us in our tracks. We got to speak with VG Motorsports

By Greg Jones
872 cid Reher Morrison Pro Mod Nitrous Engine

A car like this 1966 Corvette featuring an 872 cid Reher Morrison Pro Mod nitrous engine is trying to kill itself every minute it’s running. But, a lot of this drag-and-drive racing is about loving the car you’re working on and feeling it’s a cool hot rod. John Ens and Dave Schroeder certainly have a cool hot rod, even if it’s a bit different! Check it out!

By Greg Jones