Eneos Racing Pro 10w-50 Oil
With Racing Pro 10w-50, a 50/50 ester mix provides exceptional wear protection, extra high horsepower, and further anti-oxidation stability.
Mahle PowerPak Pistons for 6.0L and 6.4L Powerstroke Engines
All four sets offer incredible versatility, allowing a daily driver to become a weekend warrior for drag, dyno, or pulling competitions.
Dayco to Offer eXtra Loyalty Program
Shops can earn points for Dayco kit and water pump purchases.
Supercharged 388 cid LS Engine
Hoping to reach new heights in the mile, this Cadillac customer brought his car and engine in for the School of Automotive Machinists & Technology to work their magic on. See what went into the supercharged LS engine platform.
FuelTech NanoPRO O2 Conditioner
The NanoPRO is able to condition and read five different models of wide band lambda O2 sensors.
Turbocharged 5.9L Cummins Engine
As an industrial millwright, Devan Leeds has a lot of knowledge and skills with his hands. He’s also a thrill seeker when it comes to high-speed vehicles. Case in point, his ’03 Ram 2500, which features a rowdy, turbocharged 5.9L Cummins engine under the hood. Check it out!
Supercharged 521 cid Brad Anderson Hemi Engine
Amanda Hoover and Eddie Rogers have been campaigning their Chevelle from Hell for nearly a decade. Helping give the car its name is a screw-blown 521 cubic inch Hemi engine. Check out the details of this build done by Chris Duncan Race Cars!
Designing a Better LS Engine
After a customer wanted a Steve Morris Engines’ SMX in an LS version, Steve saw the upside and potential in the market, and a challenge to build a better LS.
Engine Builder Hall of Fame Names Inaugural Class
The racing industry was built by talented, innovative and creative innovators, driven to achieve faster, quicker, higher performing engines. To show appreciation and support to the pioneers and those continuing to push engines further than they’ve gone before, the Engine Builder Hall of Fame has been established. The Engine Builder Hall of Fame mission statement
Compound-Turbo 6.0L Powerstroke Engine
Steve Burton of New Performance Automotive and Chris Moore of Flatwoods Diesel Performance recently teamed up to build this compound-turbo 6.0L Powerstroke engine. Check it out!
3 Engines for Sale – LS3 and Two Small Block Chevys
John Nijssen of Stroker Engine Exports is selling three performance V8 engine builds.
Summit Racing SPC Engine Block
These are brand new, heavy-duty castings that can handle up to 700 horsepower.
Summit Racing Pro Hemi Camshafts
The Pro Hemi Camshafts are precision ground in the USA from high-quality bearing steel billet cores and finished on modern Landis CNC grinders.
Compound Turbo VP44 5.9L Cummins Engine
Cole Sojka’s diesel truck journey began at the age of 16 when he bought a 2001 Dodge Ram 2500 as a farm truck. Over the past eight years and 100,000 additional miles, he’s transformed the truck, including building up the 5.9L VP44 compound-turbo Cummins engine. Check out the build!
760 cid Billet Big Block Chevy Nitrous Engine
Despite what you may think about nitrous engines, and those that are stock big block Chevy bore spacing, these 4.840″ bore space big block Chevy engines have some significant R&D in them. Just check out this 760 cubic inch billet version done at TRE Racing Engines.
Valvoline Global Introduces Restore & Protect Motor Oil
Valvoline Global, a worldwide leader in automotive and industrial solutions, has announced the launch of its premium full synthetic motor oil, Restore & Protect. The new oil removes up to 100% of engine-killing deposits with continuous use, restoring engines to run like factory clean while protecting against future damage. According to Valvoline, this latest addition
Single-Turbo 5.9L Cummins Engine
Aaron West has done a few smaller scale builds to date, but he recently finished up a “Frankenstein” truck that is pretty impressive. The body is a 1990 Dodge D150, while the chassis is from a shortened 2003 Dodge 2500 4WD, and the engine is a turbocharged 5.9L Cummins. It’s our Diesel of the Week!
Naturally Aspirated 440 cid LT1 Engine
The folks at Late Model Engines in Houston, TX run a top-notch engine and machine shop. You don’t have to look much further than this naturally aspirated 440 cid LT1 engine build to see what we mean. It’s our Engine of the Week!
Melling Engine Parts Acquires QualCast
Melling Engine Parts has announced the acquisition of QualCast, a manufacturer and supplier of valvetrain automotive parts based in Nashville, TN. Qualcast offers all facets of valvetrain applications including heavy-duty, industrial, light and medium-duty, marine and performance. “QualCast will strengthen Melling’s valvetrain business and allow us to expand into market segments we do not have
All-Billet Duramax Drag-and-Drive Engine
Having been put on the back burner due to Wagler Competition’s popular DX Duramax engines, this brand-new billet Duramax engine has finally made it to the forefront. Rather than being aimed at truck pullers, this lighter diesel engine is specifically designed for drag racers and drag-and-drive events. Check out what makes this Duramax unique.