You searched for Safety - Page 4 of 28 - Engine Builder Magazine
Nitrous Update

The use of nitrous oxide in diesel engines is not a new concept. In fact, it has been used in drag racing for decades. However, it is only in recent years that it has gained widespread popularity in the worlds of diesel truck pulling and drag racing. Now, it seems as if almost everyone in the competitive scene is using it. 

May Shop Solutions 2023

Engine and machine shop tips and tricks.

NMRA/NMCA Announces Event Team Promotions, Additions

Santa Ana, California-based ProMedia has announced promotions and additions to its Holley NMRA Ford Nationals series and Red Line Oil NMCA Muscle Car Nationals series events teams. Gene Bergstrom has been promoted to NMRA/NMCA senior director of racing operations, while Michael Washington has been promoted to NMRA/NMCA racing operations manager. Bob Fairey joins the team

Brenthel Race Trucks Joins Legacy Racing

We are pleased to welcome Brenthel Race Trucks as the title sponsor for the 2023 Racing Series. Brenthel Race Trucks has been building top of the line race cars,trucks and pre- runners for more than a decade. Drivers like Kyle Jergensen, Sam Berri, Chuck Dempsey and the reigning 2022 Class 6100 Champion, Conner McMullen have

The Drag & Drive Revolution

Following that first drag-and-drive event back in 2005, spinoffs of Drag Week have been happening all over the country, and the world, both large and small. In recent years, the trend has been completely blowing up!

Chevrolet Reveals Corvette Z06 GT3.R for 2024 Competition

Chevrolet has debuted the new Corvette Z06 GT3.R racecar, a year before it makes its competition debut at the 2024 Rolex 24 at Daytona. Making its public debut at Daytona International Speedway ahead of last Saturday’s Rolex 24, the Corvette Z06 GT3.R is Chevrolet’s first racecar that fully meets FIA technical regulations for GT3 cars.

A Look at Lead Times

Lead times are no longer months upon months as they were in the middle of 2020 and throughout 2021, but the situation is still of some concern, and it’s forced engine builders to get creative at times.

NASCAR Names New Sr. VP of Competition, Promotions

NASCAR has announced Elton Sawyer has been named its senior vice president of Competition.  “Following his lengthy driving career, Elton held key leadership positions for several race teams and here at NASCAR for the last eight seasons. He will excel in this role, and we look forward to watching him continue to grow the Competition

KUKA’s LBR iisy Cobot Ready-To-Use Automation

Referred to as Sensitive Cobotic technology, KUKA’s LBR iisy represents the future of automation. The cobot is ready-to-use automation that quickly and easily integrates into any manufacturing application from pre-defined production processes to open, unstructured work environments with unpredictable conditions from one job to the next. Whether loading/unloading machines, assembling components or packaging, the cobot provides increased

Shop Solutions December 2022

Everyone misses occasionally, and this helps avoid dents and damage.

Hot Shot’s Secret Announces Title Sponsorship of the NHRDA Diesel Drag Racing and Sled Pulling Series

Hot Shot’s Secret is pleased to announce the title sponsorship of the National Hot Rod Diesel Association (NHRDA) series. NHRDA, billed as the world’s largest diesel organization, promotes diesel events throughout North America including diesel drag racing, sled pulling, show ‘n shines, dyno competitions, and burnout competitions.  At this time, NHRDA has committed to five

Xtreme Outlaw Midget Series Announces Tyler Bachman as Series Director

World Racing Group’s Xtreme Outlaw Midget Series presented by Toyota has named Tyler Bachman as the new series director. Bachman is a longtime official and safety director within the World of Outlaws and DIRTcar Racing family. He served as competition director for the Xtreme Outlaw Series in 2022 and aims to expand the Midget tour in 2023.

NASCAR Announces Launch of Brazil Sprint Race Series

NASCAR has announced the creation of the NASCAR Brasil Sprint Race, the sanctioning body’s fourth international series and first in South America. The series, which will begin competition in 2023, is a partnership between NASCAR and the GT Sprint Race series in Brazil. “Brazil is a vibrant country, rich in motorsports culture and community, and

Randy Bauer Shares His Experience as PERA President

We recently spoke to Randy about his PERA presidency and what some of the biggest hurdles are facing the engine remanufacturing industry right now.

All Things Media Blasting

Engine building is a segment of the automotive industry that has always been ahead of the curve in media blasting, and no matter the engine shop, cleaning equipment is a common bond.

Universal Technical Institute and Volvo Expand Training Program

Universal Technical Institute (UTI) and Volvo Car USA (Volvo) are offering a new opportunity for UTI students on the East Coast who are interested in becoming certified Volvo technicians. The Volvo TEKNIKER Apprentice Program, a 12-week, manufacturer-paid apprentice program, is expanding, and is now offered at Volvo’s training facility in Ridgeville, S.C., north of Charleston, in

Developing a Honda 2.3L Engine for Road Racing

One of the most important aspects of engine building has nothing to do with the engine at all. You have to understand the customer and what they are trying to achieve.

Honda Engine
Aeromotive Introduces Its First Ever Universal Fuel Cell Plate

The Aeromotive Fuel Cell Plate with fuel pump and accessory mounts provides maximum safety and durability for fuel cells at least 10-inches deep.

Feature Edit
Nostrum 3.0L BMW S55/N55 Stage 2 DI Injectors

The Nostrum BMW S/N55 Stage 2 Injectors are the largest injectors currently on the market with 55% more fuel flow than stock injectors.

Romi GL 300S Turning Center with Sub-Spindle

The GL 300S comes equipped with thermal compensation with sensors to maintain stable, dimensional results even during long working periods.