Edelbrock Rollin' Thunder Camshaft For Small-Block Chevrolet Engines - Engine Builder Magazine

Edelbrock Rollin’ Thunder Camshaft For Small-Block Chevrolet Engines

Edelbrock is now offering a new Rollin' Thunder camshaft for small-block Chevrolet engines. Edelbrock Rollin' Thunder camshafts are designed to improve horsepower and torque, produce a great sounding performance idle and provide sufficient vacuum.

2231angledEdelbrock is now offering a new Rollin’ Thunder camshaft for small-block Chevrolet engines. Edelbrock Rollin’ Thunder camshafts are designed to improve horsepower and torque, produce a great sounding performance idle and provide sufficient vacuum. Rollin’ Thunder camshafts feature more aggressive lift profiles than conventional flat-tappet hydraulic cams, without excessive valve overlap that can compromise low rpm drivability.

The new Rollin’ Thunder camshaft (#2231) is designed specifically for use with 1957-86 Chevrolet 283-400 V8 engines. This camshaft features a unique profile that will provide sufficient vacuum at idle for power brakes and other vacuum powered accessories. This camshaft includes assembly lube and instructions (lifters sold separately). In testing, this camshaft produced 460 HP and 460 ft-lbs. of torque when matched with a Performer RPM intake manifold (#7516), Thunder Series AVS carburetor (#1813) and Performer RPM E-Tec cylinder heads (#60985) on an Edelbrock 383 crate engine.

Features Include:
Rollin’ Thunder camshafts are designed for optimum power from 1,500 to 6,500 rpm
Rollin’ Thunder camshaft (#2231) is designed for use with 1957-86 Chevrolet 283-400 V8 engines
It produced 460 HP and 460 ft-lbs. of torque on an Edelbrock 383 c.i.d. crate engine
Features aggressive profiles that will also provide excellent performance with sufficient vacuum at idle for power brakes and other vacuum powered accessories
Includes camshaft, assembly lube and instructions.

For more info: www.edelbrock.com

You May Also Like

Get’M Piston Cooling Kits and Jets

Installation kits are available for LS, BBC, SBC, and some Ford engines and include reusable fixtures which can be used multiple times to drill similar blocks.

Piston oilers optimizes engine cooling, boosting horsepower, increasing reliability, and enhancing performance engines longevity, while allowing for a more aggressive tune. Installing piston oiling jets in the engine block’s main webbing allows for a cooling jet to spray the underside of the piston with oil and reduce piston temperature by flowing heat away.

Calico CT-5 PTFE Coating

Calico’s CT-5 PTFE is a non-stick, oil-shedding coating for aluminum, steel, and stainless-steel substrates.

calico coating
Silver Seal’s Deluxe Valve Stem Height Gauge Set

The height gauge set includes a .001″ dial indicator with a solid billet aluminum base included and is made in the USA.

Silver Seal gauge set
Haltech Nexus Rebel LS Gen 3 and Gen 4 ECU Kits

The Nexus Rebel LS ECUs are compatible with Haltech’s plug-and-play CAN accessories.

Haltech ECU
Graymills Benchtop Ultrasonic Cleaners

These machines feature a self-enclosed design with stainless steel, corrosion-resistant tanks and lift-off covers.

Graymills ultrasonic cleaner
Other Posts
AMSOIL 0W-8 100% Synthetic Hybrid Motor Oil

This new 0W-8 viscosity is engineered for applications calling for the JASO GLV-1 specification.

AMSOIL hybrid oil
Crower EnduraMax Roller Lifters

Available in all popular sizes and comes standard with Crower’s High Pressure Pin Oiling to help keep the roller and shaft lubricated.

Crower roller lifter
Point One Chevy Oil Pump Stud Kit

Point One manufactures high-strength critical engine fasteners for aftermarket automotive, racing, and other demanding applications.

P1 Chevy oil stud kit
King HP- and XP-Series Rod and Main Bearings

King Bearings’ HP- and XP-Series bearings are available in standard size and a wide range of over- and undersizes for popular V8s.

HP-series bearings