Holley OEM-Style EFI 255 LPH Fuel Tank Modules - Engine Builder Magazine

Holley OEM-Style EFI 255 LPH Fuel Tank Modules

Holley/MSD has announced the release of OEM-Style EFI 255 LPH Fuel Tank Modules, which are a direct replacement for your factory pick-up and sending unit and make it easy to convert your carbureted fuel system to EFI.

Holley/MSD has announced the release of OEM-Style EFI 255 LPH Fuel Tank Modules, which are a direct replacement for your factory pick-up and sending unit and make it easy to convert your carbureted fuel system to EFI. There’s absolutely no need for any modifications or fabrication, and you don’t have to get a whole new fuel tank. You can even retain the factory fuel hard line – just connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps such as Earl’s Vapor Guard.

The in-tank fuel pump is a high-pressure 255 liter-per-hour unit capable of supporting EFI-equipped engines up to 550 horsepower. The module includes a pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge already in your car or truck. A Holley HydraMat is included that maximizes available fuel at the pickup and also acts as a pre-filter. Fuel pressure is regulated internally and preset at 58 PSI, eliminating the added expense of an external fuel-pressure regulator and eliminating the need for a return line – all return fuel is handled right inside the tank.

They’re currently available for first, second, and third generation Camaro and Firebirrds (1967-69: 12-300, 1970-73: 12-301, 1974-1981: 12-304) as well as 1964-67 and 1968-72 Chevelles, Malibus, A-Body vehicles, and El Caminos (part number 12-302 and 12-303).

You May Also Like

Check Out What’s New at Dura-Bond Bearing

New transmission bearings, cam bearings and valve seat options.

We caught up Dura-Bond Bearing's Bill Dolak at the 2023 PRI Show to get a run down of what we can expect from the bearing company in 2024. Dura-Bond has new transmission kits, new cam bearings for the LS3 and Ford Godzilla engines, and a new copper-infiltrated powder metal valve seat, among plenty more.

ARP Special Chaser Taps

ARP has expanded its tap offerings to include some 22 different sizes.

ARP chaser taps
Summit Racing Forged Pro Pistons

Made in the USA, Summit Racing Forged Pro Pistons are made using ultra-modern technology and materials so they’re stronger and lighter.

CP-Carrillo Pistons and Rods for VW/Audi

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels.

Eneos Racing Pro 10w-50 Oil

With Racing Pro 10w-50, a 50/50 ester mix provides exceptional wear protection, extra high horsepower, and further anti-oxidation stability.

Eneos 10w-50 motor oil

Other Posts

Fluidampr Performance Damper for Mazda Miata

Fluidampr performance dampers protect your engine from destructive crankshaft torsional vibration.

Fluidampr Mazda Miata damper
Mahle PowerPak Pistons for 6.0L and 6.4L Powerstroke Engines

All four sets offer incredible versatility, allowing a daily driver to become a weekend warrior for drag, dyno, or pulling competitions.

Point One Small Block Chevy Head Stud Kit

Point One’s E190 head studs boast an impressive 190,000 psi nominal tensile strength.

Cadillac Supercharged LS engine
Weinle Motorsports Sheet Metal Intakes

These custom aluminum sheet metal intakes are built to your specs.