Holley Accessory Drive Upgrades for LT Gen V Engines - Engine Builder Magazine

Holley Accessory Drive Upgrades for LT Gen V Engines

These two new accessory drive upgrades for GM LT Gen V engines are the perfect add-on for your next LT4/LT5 swap.

Holley has announced the release of two new accessory drive upgrades for GM LT Gen V engines. These retrofit kits are the perfect add-on for your next LT4/LT5 swap – The alternator mount design offers more chassis clearance for LT4 engine swap applications and can be used with existing OE (original equipment) accessories and mounting locations. The hydraulic power steering kits works with original equipment GM LT4/LT5 accessories and brackets, the design incorporates a splined dual bearing system that eliminates belt stresses on the P/S pump’s internal bearings, assuring long life.

Premium 150AMP Alternator with High Clearance Bracket
The components have an original equipment look and reliability while relocating the alternator in closer to the engine block for additional chassis clearance. The base kit Holley Part #20-226 is offered with a standard cast finish 105 amp alternator. Our premium kits, Holley #20-224 or #20-224BK offer the choice of a premium 150 amp alternator in cast or black finish. All three kits provide a complete, cost effective accessory solution for you LT4 crate engine with additional chassis clearance your application will need when compared to the OE option.
For more information on these products and a complete array of savable high-resolution photos (click image until you reach the largest size, and then right-click the image and click “Save As”), click the links below.   
20-22420-224BK20-226

Premium 150AMP Alternator with High Clearance Bracket
The components have an original equipment look and reliability while relocating the alternator in closer to the engine block for additional chassis clearance. The base kit Holley Part #20-226 is offered with a standard cast finish 105 amp alternator. Our premium kits, Holley #20-224 or #20-224BK offer the choice of a premium 150 amp alternator in cast or black finish. All three kits provide a complete, cost effective accessory solution for you LT4 crate engine with additional chassis clearance your application will need when compared to the OE option.
For more information on these products and a complete array of savable high-resolution photos (click image until you reach the largest size, and then right-click the image and click “Save As”), click the links below.   
20-22420-224BK20-226
Retro-Fit Power Steering
Looking to put an LT4/LT5 crate motor or junkyard motor into your vehicle originally equipped with hydraulic power steering? The Holley Retro-fit Hydraulic Power Steering add-on kits for GM LT4/LT5 engines to the rescue. The supercharger drive maintains the original and optimized belt path and tensioner. Included with each P/S system is a throttle body angle correcting adapter that better positions the TB for swap applications. Maintaining OE pulley ratios for optimal performance, this kit also features hard-line adapters to ensure reliability and a factory appearance. Versions of the power steering drives are available for LT4/5 dry-sump & LT4 wet-sump applications.
For more information on these products and a complete array of savable high-resolution photos (click image until you reach the largest size, and then right-click the image and click “Save As”), click the links below.   
20-22220-22320-233

You May Also Like

CP-Carrillo Pistons and Rods for VW/Audi

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels.

CP-Carrillo offers #SC7630 pistons and rods for the Volkswagen/Audi EA888 Gen III 2.0L TSI/TFSI engine. This engine is in numerous applications, including the VW Golf Mk7 R, Audi S3 and Audi TTS vehicles.

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels to take your engine to the next level. The pistons are made to accept 1mm larger valves, as well as deeper valve pockets to accommodate many aftermarket cams.

Eneos Racing Pro 10w-50 Oil

With Racing Pro 10w-50, a 50/50 ester mix provides exceptional wear protection, extra high horsepower, and further anti-oxidation stability.

Eneos 10w-50 motor oil
Fluidampr Performance Damper for Mazda Miata

Fluidampr performance dampers protect your engine from destructive crankshaft torsional vibration.

Fluidampr Mazda Miata damper
Mahle PowerPak Pistons for 6.0L and 6.4L Powerstroke Engines

All four sets offer incredible versatility, allowing a daily driver to become a weekend warrior for drag, dyno, or pulling competitions.

Point One Small Block Chevy Head Stud Kit

Point One’s E190 head studs boast an impressive 190,000 psi nominal tensile strength.

Cadillac Supercharged LS engine

Other Posts

Weinle Motorsports Sheet Metal Intakes

These custom aluminum sheet metal intakes are built to your specs.

Peterson Fluid Systems’ Fat Boy Dirt Late Model Oil Tank

Peterson Fluid Systems’ new 08-0919 Fat Boy Dirt Late Model Oil Tank provides engine builders with more oil capacity when chassis space is limited. With a lower profile design and all the standard features of their race-proven DLM tanks, this tank is 18.62” tall with a 5-gallon capacity. Related Articles – Total Seal Severe-Duty High-Performance Diesel Rings

Total Seal Severe-Duty High-Performance Diesel Rings

New Total Seal diesel ring sets are available for Cummins 5.9L and 6.7L, Duramax 6.6L, Powerstroke 6.4L to 7.3L, and custom sets.

K1 Toyota Supra / BMW B58 Connecting Rods

Forged from 4340 steel and machined within precise tolerances, these connecting rods for the B58 boast a winning combination of features.