Aeromotive Drop-In Phantom Brushless Fuel Pumps for Late-Model GM 1500 Pickups - Engine Builder Magazine

Aeromotive Drop-In Phantom Brushless Fuel Pumps for Late-Model GM 1500 Pickups

The new in-tank fuel pumps are easy to install and are available in 3.5 gallon-per-minute and 5.0 gallon-per-minute configurations to support up to 3,400 horsepower.

Aeromotive, the leading aftermarket fuel systems and accessories manufacturer, has developed Direct Drop-In Phantom Brushless Spur Gear Fuel Pumps for 2005-18 Chevrolet Silverado and GMC Sierra 1500-series trucks. The fuel pumps are designed to directly fit factory fuel tanks with 3.5 gallon-per-minute and 5.0 gallon-per-minute (GPM) flow rates. Unique OEM-style brackets accommodate different applications and fuel level sending units. The pumps are engineered to deliver the proper fuel volume to high-performance street, off-road and racing applications with easy installation when using the factory tank.

Both pump options come equipped with the True Variable Speed Controller, which helps extend the life of the pump and maximizes efficiency by decreasing fuel pump speed during low-demand periods. This is done by reducing the current draw and cycle rate, resulting in cooler fuel temperatures.
 
The 3.5 GPM Brushless Spur Gear Fuel Pump (Part # 18087) can support naturally-aspirated gasoline applications up to 2,400 horsepower, naturally-aspirated E-85 ethanol applications up to 1,680 horsepower, forced-induction gasoline applications up to 1,800 horsepower and forced-induction E-85 ethanol applications up to 1,260 horsepower. For those looking for more flow, the 5.0 GPM Brushless Spur Gear Fuel Pump (Part # 18088) supplies enough fuel for naturally-aspirated gasoline applications up to 3,400 horsepower, naturally-aspirated E-85 ethanol applications up to 2,380 horsepower, forced-induction gasoline applications up to 2,600 horsepower and forced-induction E-85 ethanol applications up to 1,820 horsepower. 
 
Aeromotive’s 3.5 and 5.0 GPM Direct Drop-In Brushless Spur Gear Fuel Pumps for 2005-18 GM 1500-series trucks come with built-in 100-micron inlet filters, ORB-10 outlets and ORB-08 return and vent line sizes. Our patented Phantom foam and bladder technology are included with a remote-mounted True Variable Speed Controller. Each pump is capable of flow rates up to 3.5 gallons-per-minute or 5.0 gallons-per-minute, respectively, at 13.5 volts. The 3.5 and 5.0 GPM Direct Drop-In Phantom Brushless Spur Gear Fuel Pumps are backed by Aeromotive’s one-year limited warranty. For more information on the Brushless Spur Gear Pump line and other products from Aeromotive, visit www.Aeromotiveinc.com.

You May Also Like

ARP Special Chaser Taps

ARP has expanded its tap offerings to include some 22 different sizes.

ARP chaser taps

Properly preparing engine blocks, cylinder heads and other components for assembly should include thoroughly cleaning all threaded apertures. Debris can severely compromise accurately preloading a fastener, which is why ARP offers specially designed “chaser” taps.

These taps are not designed to cut threads; only clean them. ARP has expanded its tap offerings to include some 22 different sizes (SAE and metric), plus combination sets that feature the most popular sizes.

Summit Racing Forged Pro Pistons

Made in the USA, Summit Racing Forged Pro Pistons are made using ultra-modern technology and materials so they’re stronger and lighter.

CP-Carrillo Pistons and Rods for VW/Audi

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels.

Eneos Racing Pro 10w-50 Oil

With Racing Pro 10w-50, a 50/50 ester mix provides exceptional wear protection, extra high horsepower, and further anti-oxidation stability.

Eneos 10w-50 motor oil
Fluidampr Performance Damper for Mazda Miata

Fluidampr performance dampers protect your engine from destructive crankshaft torsional vibration.

Fluidampr Mazda Miata damper

Other Posts

New Study Shows Feasibility of Liquid Propane Direct Injection Engines

Research study shows new technology can enable widespread production and commercialization of lower-carbon lifecycle medium-duty LPG engines.

Mahle PowerPak Pistons for 6.0L and 6.4L Powerstroke Engines

All four sets offer incredible versatility, allowing a daily driver to become a weekend warrior for drag, dyno, or pulling competitions.

Point One Small Block Chevy Head Stud Kit

Point One’s E190 head studs boast an impressive 190,000 psi nominal tensile strength.

Cadillac Supercharged LS engine
Weinle Motorsports Sheet Metal Intakes

These custom aluminum sheet metal intakes are built to your specs.