Holley Ford Coyote Ultra Lo-Ram & Hi-Ram Intake Manifolds - Engine Builder Magazine

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
EngineBuilder Logo - Babcox Media
Content for engine professionals and enthusiasts
Products

Holley Ford Coyote Ultra Lo-Ram & Hi-Ram Intake Manifolds

Engine Builder
By Engine Builder

The Holley Hi-Ram and Ultra Lo-Ram are designed to fit stock bolt pattern OE heads found on the 2011-2023 Ford 5.0 Coyotes and related engine families, such as, Voodoo and Predators. These kits include fuel rails for use with OEM type fuel injectors and clips, mounting hardware, and O-ring gaskets. Offered in black and natural as-cast finish, both manifolds have a 9.20-inch runner length and are designed to improve the mid to high RPM powerband.

Related Articles

The Ultra Lo-Ram provides an additional 19.4mm front and 42.6mm rear clearance compared to the Ford Performance Cobra Jet manifold, plus clears 2015-2023 Mustang factory hoods. Offered in both round and oval throttle body configurations, with replacement front inlets for easy interchangeability. The oval inlet can accommodate up to a 150x66mm single throttle body and 93mm on the round variant. Round inlets include standard mounting provisions for GT350, GT500, and LS 4-bolt throttle bodies. 2011-2023 GT throttle bodies can be used with the optional 717-18 adaptor.

The aggressively designed Hi-Ram is constructed in a two-piece design to accommodate for air to water intercoolers and feature up to 20% more plenum volume versus Ultra Lo Rams. This manifold design is only offered in an oval throttle body configuration.

Features:

  • As-cast aluminum construction: more durable for boosted applications, can be welded for modifications
  • Modular design: accessible runner entries for porting, allows accessories like intercoolers and nitrous plates
  • 300-911 and 300-912 Ultra Lo-Ram will fit under stock hood with stock engine mounts in 2015-23 Mustang
  • Refined port design with streamlined injector boss for reduced turbulence without loss of flow area
  • Allows a variety of throttle valves including large monoblade, 2015-20 GT350, 2007-14 GT500, 2019-23 GT500, GM LS 4 bolt, 2011-23 Ford Mustang GT (with optional adapter 717-18)
  • Fuel rails with -8AN ports and dual 1/8 NPT accessory ports for gauges or Gen 3 direct injection fuel line hookup
  • 300-911 and 300-912 front inlets can be interchanged between round and oval with service parts
  • Plenum Volumes: 300-910 9.8-liters, 300-911 8.4-liters, 300-912 8.2-liters
  • Two 1/8 NPT ports on all manifolds. Two 3/8 NPT ports on all manifolds, except 300-911 has one

You May Also Like

Products

Carrillo Forged Pistons and Connecting Rods for Ford 7.3L Godzilla

These pistons are forged from 2618T aluminum alloy and machined on dedicated CNC machine cells to tight tolerances. 2618 aluminum has a lower silicon content than other alloys. That makes the pistons stronger and more ductile—perfect for high-load, high-stress applications like superchargers, turbochargers, or nitrous oxide.  Other features include:• Rated to handle up to 1,500

Engine Builder
By Engine Builder

These pistons are forged from 2618T aluminum alloy and machined on dedicated CNC machine cells to tight tolerances. 2618 aluminum has a lower silicon content than other alloys. That makes the pistons stronger and more ductile—perfect for high-load, high-stress applications like superchargers, turbochargers, or nitrous oxide. 

Other features include:• Rated to handle up to 1,500 horsepower• -21.1cc dish with two valve reliefs• Lateral gas-ported to maintain tighter piston-to-bore clearances for better sealing• 10.5:1 compression on E85 with 1.338-inch compression height• .990-inch chromoly wristpins for use with wire locks• Choice of 4.225- or 4.250-inch bore sizes

Read Full Article

More Products Posts
Fluidampr Harmonic Damper from Summit Racing Equipment

The factory harmonic damper on your modern GM, Ford, or Mopar V8 are ‘tuned’ to absorb what’s called torsional vibration in the engine’s normal operating RPM range. Performance modifications, particularly ones that increase torque, produce added vibration in an RPM range that the elastomer damper wasn’t designed to handle. That vibration will accelerate component wear,

By Engine Builder
Elgin OE Replacement MLS Head Gaskets for Ford 6.7L Diesel Engines

Elgin Industries has introduced original equipment replacement multi-layer-steel head gaskets for 2011-2020 Ford 6.7L diesel engines. Related Articles – Turbosmart TS-1 Externally Wastegated Turbocharger – FuelTech FT600 EFI System – Trick Flow Specialties DHC 200 Aluminum Cylinder Heads The new gaskets – EHG-26661 (left) and EHG-26662 (right) – match the design, fitment and quality of

By Engine Builder
Starrett Introduces Easy-to-Use Precision Wireless Electronic Depth Gages

The L.S. Starrett Company, a leading global manufacturer of precision measuring tools and gages, metrology systems and more, has introduced three Wireless Electronic Depth Gages including the W640JZ, W643JZ, and W644JZ which are made in the U.S.A., part of a line of over 40 new electronic precision gages that Starrett recently introduced to the market.

By Engine Builder
PBM Rotating Assemblies

PBM rotating assemblies have a proven reputation of quality, durability and performance.

By Engine Builder

Other Posts

Speedmaster LS3 Dual Plane 4150 Midrise Air Intake Manifold

Speedmaster®, a leading global automotive performance brand specializing in high performance engine parts, is pleased to introduce a new Chevy/GM LS3 Dual Plane 4150 Midrise Air Intake Manifold.  Related Articles – Stanadyne to Debut New Performance Product Line at PRI – SADEV Racing Transmission to Showcase New Innovations at PRI – King to Showcase New

By Engine Builder
Holley Appoints Chief Product Officer; Establishes Vertical Market Focus for Growth

Holley Inc.–the Bowling Green, Kentucky-based consumer platform for automotive performance enthusiasts–is implementing a new organizational design to capitalize on growth opportunities across the company’s full brand and business portfolio. The strategic realignment establishes seven distinct market segments, with the goal of strengthening the company’s ability to serve the classic vehicle market while also expanding its

By Engine Builder
Holley Focuses on Accelerating Growth with New Market Segment Orientation

Holley Inc. is implementing a new organizational design to capitalize on growth opportunities across the company’s full brand and business portfolio. The strategic realignment establishes seven distinct market segments, further strengthening the company’s ability to serve the classic vehicle market while also expanding its focus on aftermarket solutions for newer model vehicles. Related Articles –

By Engine Builder
CHE Precision LS Series Rocker Arms

CHE found ways to improve the factory production rocker arms reliability.

By Engine Builder