Tim Banning is president of Keith Black Racing Engines and For Hemis Only located in Clearwater, FL. The shop, which specializes in Gen II Hemis and Mopar Wedges, utilizes blocks made to the highest standards. To maintain those standards during machining, along with increased automation and accuracy, the shop recently purchased a new Rottler H85AX hone. Hear more from Tim about his shop and his new purchase in this Rottler Report.
With the SML engine fully assembled, Jason Sack visits Steve Morris Engines to help with the dyno testing and tuning, as well as fitting the new SML into the Cowboy Up Nova.
With the SML engine fully assembled, Jason Sack visits Steve Morris Engines to help with the dyno testing and tuning, as well as fitting the new SML into the Cowboy Up Nova.
Machine work and sleeving has been completed on Jason Sack’s SML engine. Now Steve and his crew at Steve Morris Engines gets the engine assembled. Related Articles – Jason Sack’s Cowboy Up Nova Gets Steve Morris Engine’s SML – Part 1 – A Better Way to Remove Valve Springs – Naturally Aspirated USAC Midget Honda
Jason Sack’s Cowboy Up Nova was already a formidable drag-and-drive streetcar capable of 200 mph 7-second quarter mile ETs and 2,200 horsepower. However, the quest for more power and performance is never done, and that’s where Steve Morris Engines comes in and the new SML engine platform. Watch as Steve readies an SML for Jason’s
Danny Soliz of Hill Country Performance & Machine has a lot of tricks up his sleeve to make engine work a little easier. He’s great at working smarter not harder, and in this latest video he shows you a great way to remove valve springs and keep some of those valvetrain components organized. Related Articles
We were recently in Danville, IN to visit 4 Piston Racing, a premier performance Honda engine shop, and co-owner Luke Wilson. During our visit, we got to see a ton of cool things in various stages of completion, but one of the standout builds was this naturally aspirated USAC Midget Honda engine that had just
Factory cylinder heads for Gen III Hemi engines are pretty darn good. Edelbrock’s Performer RPM Gen III Hemi Cylinder Heads are even better. The fully assembled heads feature fully CNC-machined combustion chambers, CNC-profiled bowls, and CNC-profiled port entries/exits for improved airflow—up to 337 CFM on the intake side at .700-inch of valve lift. Edelbrock says
Melling’s Hemi 5.7L and 6.1L High-Volume Oil Pump provides 20% higher volume than stock.
Speedmaster Assembled Cylinder Heads come ready to run with stainless steel valves; valve springs; and valve seals, locks, and retainers. They are sold in pairs.
As part of our Vehicle Care Rockstars brand, Engine Builder editor Greg Jones traveled to the Danville, IN area to meet with Luke Wilson, co-owner of 4 Piston Racing, a premier, performance Honda engine machine shop. Luke has been in the engine building industry for well over 20 years and continues to push the boundaries
