Elgin Pro Stock Conical Valve Springs - Engine Builder Magazine

Elgin Pro Stock Conical Valve Springs

Elgin PRO-STOCK conical valve springs help stabilize valvetrain dynamics and provide superior damping without wear.

Elgin Industries has introduced premium Elgin PRO-STOCK conical valve springs engineered for General Motors LS Series and Chrysler Hemi performance engines. The new PRO-STOCK springs (#RV-107228Q16) feature a next-generation conical design that ensures performance and durability while accommodating the peak valvetrain RPMs associated with high-performance camshafts.

Unlike cylindrical and beehive springs, Elgin PRO-STOCK conical valve springs help stabilize valvetrain dynamics and provide superior damping without wear, interference contact and other concerns. With a progressively narrower diameter from bottom to top, each coil of a conical spring has its own frequency, dramatically reducing load, increasing the spring’s peak RPM capabilities and enabling customers to use a more aggressive camshaft. A superfinished surface optimizes the springs’ max lift capability and durability.

Specifications of these new springs, sold in sets of 16, are below: 

Elgin #               OD Top   ID Top  OD Bottom  ID Bottom   Inst. Load      Open Load 

RV-107228Q16   1.030       .650        1.286            .918        135 @ 1.800    410 @ 1.170

For more information: https://catalog.elginind.com

You May Also Like

CP-Carrillo Pistons and Rods for VW/Audi

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels.

CP-Carrillo offers #SC7630 pistons and rods for the Volkswagen/Audi EA888 Gen III 2.0L TSI/TFSI engine. This engine is in numerous applications, including the VW Golf Mk7 R, Audi S3 and Audi TTS vehicles.

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels to take your engine to the next level. The pistons are made to accept 1mm larger valves, as well as deeper valve pockets to accommodate many aftermarket cams.

Eneos Racing Pro 10w-50 Oil

With Racing Pro 10w-50, a 50/50 ester mix provides exceptional wear protection, extra high horsepower, and further anti-oxidation stability.

Eneos 10w-50 motor oil
Fluidampr Performance Damper for Mazda Miata

Fluidampr performance dampers protect your engine from destructive crankshaft torsional vibration.

Fluidampr Mazda Miata damper
Mahle PowerPak Pistons for 6.0L and 6.4L Powerstroke Engines

All four sets offer incredible versatility, allowing a daily driver to become a weekend warrior for drag, dyno, or pulling competitions.

Point One Small Block Chevy Head Stud Kit

Point One’s E190 head studs boast an impressive 190,000 psi nominal tensile strength.

Cadillac Supercharged LS engine

Other Posts

3,500+ HP 427 cid Billet LS Engine

At ACE Racing Engines, Stefan Rossi’s and Laura Pugh’s hard work has been paying off in the form of increased awareness and business, a new shop space out in California, and best of all, success on the track from numerous customers. Check out this excellent example of a maximum effort, billet LS engine for a drag-and-drive application.

ACE Racing Engines’ 427 cid Billet LS Drag-and-Drive Engine

We’ve known Stefan Rossi for a number of years now, and his work at ACE Racing Engines is something to behold. He’s an engine builder who never rests on his laurels, and is always pushing himself and his engines to new levels. Case in point, he’s developed a partnership with Noonan Race Engineering to utilize

Weinle Motorsports Sheet Metal Intakes

These custom aluminum sheet metal intakes are built to your specs.

Peterson Fluid Systems’ Fat Boy Dirt Late Model Oil Tank

Peterson Fluid Systems’ new 08-0919 Fat Boy Dirt Late Model Oil Tank provides engine builders with more oil capacity when chassis space is limited. With a lower profile design and all the standard features of their race-proven DLM tanks, this tank is 18.62” tall with a 5-gallon capacity. Related Articles – Total Seal Severe-Duty High-Performance Diesel Rings