Causes of Carbon Deposit Buildup in Diesel Engines and How to Prevent It - Engine Builder Magazine

Causes of Carbon Deposit Buildup in Diesel Engines and How to Prevent It

Carbon deposit buildup on diesel engine components such as piston heads, fuel injectors and intake valves is a bigger problem than it is for gasoline engines. Here's what you can do to help stop it.

Carbon deposit buildup on diesel engine components such as piston heads, fuel injectors and intake valves is a bigger problem than it is for gasoline engines. There is a federal requirement that certain detergents be added to gasoline at the refinery itself, but there is no such mandate for adding detergents to diesel fuel. For this and many other reasons, diesel engines are more susceptible to carbon deposit buildup.

Most of the blame, however, has been assigned to the fact that the fuel spray from a diesel injector goes directly into the cylinder bypassing, for example, the back of the intake valve where deposits are likely to form. The increasing use of high pressure common rail fuel systems have also increased engine deposits. Other reasons for diesel engine carbon deposits are the use of low-quality fuel, short cold weather trips, excessive idling, infrequent oil changes and even dirty air filters.

“In addition to adopting good driving practices, the best thing you can do to keep a diesel vehicle in optimal driving condition is to keep the engine clean of carbon deposits,” says Christopher Miller, vice president, E-ZOIL. The company manufactures fuel additives and cleaning solutions for fleet owners and consumers to protect their diesel vehicles and equipment.

Once carbon buildup begins to accumulate on various surfaces inside the engine and is left untreated, the vehicle loses power, becomes sluggish and causes a significant increase in emissions and reduction in fuel economy. No doubt all of this erodes the mileage and performance gains expected of a diesel engine and if we are talking about a fleet of 1,000 vehicles or more, it ultimately hurts the owner’s profit margin.

Miller recommends that diesel vehicle owners use a fuel treatment especially formulated for high pressure common rail fuel systems. For example, E-ZOIL’s diesel fuel system cleaner, Carbon Crusher, incorporates state of the art detergents that can clean the entire fuel system. These detergents help fight both traditional coke deposits and internal diesel injector deposits (IDID) and dissolve asphaltenes, which clog fuel filters. Carbon Crusher also includes a heavy-duty lubricant and cetane, which enables diesel fuel to ignite faster and help the engine run more smoothly and efficiently.

“Using a quality diesel fuel system cleaner to keep the engine clean will ensure that the vehicle will continue to give you the power and performance for which it was built in the first place,” said Miller.

For more information: www.ezoil.com.

You May Also Like

Properties of Pistons

Pistons are perhaps one of the more sophisticated chunks of metal in the picture. Here’s what you should know.

Most of us are familiar with the Enzo Ferrari quote, “What’s behind you doesn’t matter.” We can all agree the man responsible for these iconic words knew a thing or two about racing. His quote speaks to many of us, on many levels, and it’s the reason we’re driven to always do things better.

A New Take on the Rotary Engine

What if we could design a new rotary engine that addresses certain limitations without violating the laws of physics? This is what LiquidPiston has been working at for over a decade.

Perfecting Ring Seal Soup

Using modern honing machines, surface finishes, crosshatch angles, ring materials, and coatings all combine to create a more efficient engine.

Connecting Rod Stress

Connecting rods are subject to constant stress through extreme tensile and compressive loads, each one tied to a different aspect of operation.

Balancing, A State of Equilibrium

The balance of a rotating assembly is critical in every aspect and for every engine.

Other Posts

Factors of Crankshaft Selection

From the high-performance powerplants propelling Top Fuel dragsters to the subdued engines found in family sedans and grocery getters, each crank must be tailored to, and appropriate for, its specific application.

Shop Solutions March 2024

I always keep a pair of needle nose pliers and a small, straight screwdriver in my blast cabinet to hold small parts when blasting.

Compound-Turbo 6.0L Powerstroke Engine

Tyler Lambert’s Ford F-250 started as a project with a simple goal – to extract as much power as possible. Equipped with a 6.0L Powerstroke engine, the truck underwent a series of transformations, including a compound-turbo upgrade, that elevated it to the powerhouse it is now.

6.0L Powerstroke engine
Scheid Diesel is a Diesel Mecca

We recently made the drive to Terre Haute, IN to visit Scheid Diesel and owner Dan Scheid. This diesel engine and machine shop is one of three locations Scheid operates, and has the capability to everything in-house from fuel lines and injector work to machining and general repair and much more. Check out why Scheid