Harvick Wins at Michigan and Gives Ford Eight in a Row
Ford Performance and Roush Yates Engines won their eighth straight NASCAR Cup Series race at Michigan International Speedway with Stewart-Haas Racing’s Kevin Harvick in the FireKeepers Casino 400. This was Harvick’s 59th career NASCAR Cup Series victory and his series-leading sixth at Michigan. Ford retained the Michigan Heritage Trophy, presented to the winning manufacturer at
1932 Ford Truck with a 496 Big Block Chevy Engine
Stumbling upon trucks at drag and drive events is a bit more rare than the average street car. That’s why when we came across Mark Fisher’s ’32 Ford with a big block Chevy set up we knew we had to stop and check it out.
VTA T9465 Blow Off Valve For Ford Ranger 2.3 EcoBoost
Made in Australia for legendary performance, with a great Blow Off Sound! Not just a noise-maker, get improved performance too!
Turbocharged Gen III Hemi-Powered 1982 Ford Mustang
We couldn’t just walk past this gorgeous 1982 Ford Mustang without taking a few extra looks at it, and upon closer inspection, we found out it has a Gen III Hemi engine stuffed inside. Turns out owner Bob Hess is a Chrysler guy and has always wanted to put a Hemi in a Ford, so
Howell EFI I-6 and V8 Ford TBI Conversion Kits
Howell EFI is known widely in the industry for their easy to install GM-based EFI and TBI kits for Jeep CJs, most of which are 50 state emissions legal. Now available are Howell’s Ford Inline 6 and V8 TBI Kits ideal for converting carbureted first generation classic (1966 to ’77) Ford Broncos to TBI. Whether
Cummins-Swapped 1957 Ford F100
We didn’t expect to come across any diesel vehicles during our time at Sick Week, but to our surprise, there were a couple. One such competitor was Dave Workman of Porky’s Diesel Performance and his 1957 Ford F100 with a compound turbo 5.9L Cummins engine capable of 1,300 horsepower!
Ford Announces it Will Split EV and IC Development Into Different Business Units
Ford is continuing to transform its global automotive business, accelerating the development and scaling of breakthrough electric, connected vehicles, while leveraging its iconic nameplates to strengthen operating performance and take full advantage of engineering and industrial capabilities. “This isn’t the first time Ford has reimagined the future and taken our own path,” said Ford Executive
Compound Turbo 5.9L Cummins-Swapped Ford F100
Gifted a 1957 Ford F100 pickup truck at the age of 13, Dave Workman of Porky’s Diesel Performance knew the truck was destined for a Cummins swap now that it was his. After continuing to develop the truck, it now has a 1,300 HP compound turbo 5.9L Cummins in it. See it for yourself!
ProCharged 7.3L Ford Godzilla Engine
We came across Willis Performance Enterprises’ latest, and arguably most impressive, Godzilla engine build during the 2021 PRI show – this 1,500+ horsepower, ProCharged Godzilla engine. What’s super impressive about the build is it still utilizes the Ford Godzilla’s stock block, crank and cylinder head castings to achieve those high-horsepower levels. Check it out!
Ford Performance Announces Mustang GT3 Race Car
Ford Performance has revealed plans for its all-new Mustang GT3 race car that will compete in the International Motor Sports Association (IMSA) 2024 race season, including the 24 Hours of Daytona. The new Mustang GT3 racer will be powered by a Ford 5.0-liter Coyote-based V8 engine developed by Ford Performance and built by long-time racing
Aeromotive Releases New Phantom Drop-In Fuel Pump Modules for the 2015-20 Ford F-150
Compatible with both gasoline and E85 ethanol fuels, these pump modules are available with either dual or triple 450 liter-per-hour fuel pumps.
MAHLE Ford EcoBoost 2.3L PowerPak Plus Piston Kit
MAHLE Motorsport’s 2.3L PowerPak kit is loaded with value-added features for reliable power production for any 2.3L EcoBoost engine.
Ford Kent 1600 Crossflow Fabricated Aluminum Valve Cover with a Billet Rail
The part is designed with a broad, flat surface for engine builder engraving, they can be polished, chromed, powder coated or left as-is for a race look.
428 Ford FE Stroker
After finding suspicious workmanship on this Ford FE Stroker done at a shop in America, Chris Morus of Elite Engine Building in Victoria, Australia was given the engine to do the job right. See what went into this FE Stroker build!
Moroso Ford 4.6/5.4 Modular, Remote Oil Filter Adapter
This Moroso part enables the plumbing of external, wet or dry sump oil pumps when the lower port is plugged.
Shelby American Reintroduces Famous Ford Shelby GT500KR in Celebration of Company’s 60th Anniversary
Shelby American, a wholly owned subsidiary of Carroll Shelby International Inc. (CSBI:PK), today announced that one of its most famous vehicles, the Ford Shelby GT500KR Mustang, will return to honor the company’s 60th anniversary next year. A limited run of 60 “King of the Road” post-title packages with 900+ horsepower will be available worldwide for 2020-2022 model
Moroso Pick Up and SUV Oil Pan for Lincoln and Ford
Moroso introduces Part # 20849, a Expedition 1997-’02, F-150 1997-’03, F-250 1997-’99, Navigator 1998-’02, Ford, Lincoln oil pan for 4.6 and 5.4 engines. The oil pan is a heavy Duty 16 gauge steel stamping with a durable black epoxy powder coat finish. Cost effective alternative to an O.E.M. oil pan.
MAHLE Motorsport Ford EcoBoost 1.6L Shelf Stock PowerPak Plus Piston Kit
Available wherever MAHLE Motorsport pistons are sold, this complete high performance piston kit makes it easy for the engine builder that needs everything in one convenient kit including a 1.2, 1.2, 2.0mm motorsport ring set and 21mm steel pins and clips.
347 Ford Stroker Engine
Daniel Mishustin had always wanted to take on a large car project. He finally got his chance when he bought a worn out 1968 Mustang with a 302 Ford V8 that needed a rebuild. He turned it into a 347 stroker and we have the details.
Radford Racing School to Offer Trans Am Racing Program
Radford Racing School has announced the debut of a Trans Am Racing program making it the only school in the U.S. to offer such a racing experience. The new Trans Am program was developed in collaboration with legendary driver development coach and champion NASCAR and Xfinity Series racer Chris Cook, who has trained some of the world’s greatest