Small Engine Performance
Most businesses have the same problems and each must look for ways to remain competitive by reducing costs and exploring new markets for existing products or services. And so it is in engine building. There is always someone that is able to provide more features per dollar than you (or at least make someone believe
Cylinder Bore Honing: Main Objective When Refinishing The Cylinders
When an engine is rebuilt, the cylinders usuallyneed attention. Wear tends to create taper in the upper part ofthe cylinder that can reduce ring sealing and increase blowbyand oil consumption if not removed. The cylinder may also be outof round, scored or have other damage that requires correctingbefore a new set of rings will seal
Mopar Engine Platforms – 318, 360
Chrysler Corp. hasn’t built a rear wheel drive, V8-powered car (with the exception of the Viper) since the turn of the decade. And the cars that harbored V8s beneath their hoods during the late 1980s were about as appealing to performance enthusiasts as the front-wheel driven vehicles that replaced them. In spite of that fact,
The Nitty Gritty On Small Parts Cleaning: Many Ways To Clean Small Engine Parts
Tom Nichols, CEO and president of AutomotiveMachine & Supply, Inc., Fort Worth, TX, said availabilityis most often the key to why his shop cleans and reuses smallparts. Nichols said each day his shop cleans and reuses many smallparts, including valve locks, shims, springs, retainers, rockerarm assemblies, cam bore caps, nuts, bolts, etc. "Becausewe only
Performance Marine Engines – Meeting Customer Expectations
Life is a series of compromises. Human relations almost alwaysinvolves compromises of some sort. You want Chinese for dinner,she wants Italian; something has to give. Even if you go yourseparate ways, it’s a compromise and a decision to not dine together. Believe it or not, it’s the same with machinery. Any exercisein design is a
Why Parts Get Coated
I never would have believed you could get those kind of resultsfrom a glorified paint job. With those words, another skeptic(in this case, a NASCAR Winston Cup engine builder) had come toaccept the value of special coatings applied to engine components. At the time, such skepticism was not totally unwarranted. Likeany emerging technology, the coating
Desert Engine Reman Expands in the West
Since the early years of the United States, the West has alwaysprovided young pioneers a chance at adventure and the freedomto expand our nation. For Jonathan Smith, president of the ProductionEngine Remanufacturers Association (PERA), the passion for expansionfound in the hearts of those heading west is also a key elementin operating his own successful business.
Building Horsepower Through Dyno Testing
Pick up a copy of any racing-oriented automotive publication andas you thumb through its pages you’ll notice a smorgasbord ofads from engine builders. Most of them will have an assortmentof horsepower figures large enough to rival the national debt. Of course, all the numbers are suspect because, in most cases,they were obtained on the advertisers’
1997 Shop Kinks
Machine shops and custom engine rebuilders are, and always havebeen, a resourceful group. Our industry was founded on the principalof bringing component parts from a condition of disrepair to onethat offers equivalent performance to that of a new part. Rebuilt engines offer cost savings and performance benefits thatcan not be found with any other products,
Waste Minimization: Ways To Reduce, And Even Eliminate, Hazardous Wastes From Your Cleaning Process
Managing your shop’s wastes shouldn’t be hazardous to your business.Although there is a lot involved with managing wastes from cleaningoperations including operating costs to disposal requirements,the good news for rebuilders is that there are ways to reduce,and even eliminate, hazardous wastes from your cleaning process. According to the Environmental Protection Agency (EPA), materialsand wastes of
Valvetrains: Better Materials & Design
Pushrods would seem to be an endangered species these days, atleast as far as most new engine designs are concerned. The onlybrand new engines built in recent years with a pushrod valvetrainhave been Chrysler’s 8.0L V10 for the Viper and Dodge Ram, andGeneral Motors new "LS1" 5.7L small block V8. All therest have either been
Niche Market Opportunities
In today’s highly competitive market, it makes sense to constantlybe on the lookout for new opportunities. Information on the marketsdescribed in this article may provide some new business prospectsfor those shops not already involved with them. However, rebuildersshould constantly be prospecting for other niche markets for theirexisting products or services. There are potentially many products
Can We Expand Demand: There Is A Better Alternative To Buying Or Leasing A New Or Used Car
Can the engine rebuilding industry increase the size of the marketfor replacement remanufactured engines over the next several years?Can engine rebuilders and their parts and equipment suppliersexpand consumer awareness about a rebuilt engine being a preferredalternative to buying or leasing a new car or truck, or installinga used engine? Chuck Barnett, president of Dura-Bond Bearing
Ford’s 4G Alternator: IAR Series & The New 4G
When one considers the Ford IAR series of alternators,then examines the new 4G alternator, it seems that Ford went overboardto correct all the problems with the IAR series. The IAR series was designed for rapid assemblyand disassembly with plenty of snap-on connectors and mountinghardware. With this design approach came problems, particularlywith the burnt out B-S-S
Rebuilding The Chrysler Engine Family
Much of the information used to write thisarticle was provided by Bruce Chapman, president, and the employeesof Ontario Reman, Etobicoke, Ontario, Canada. Ontario Reman isan authorized Chrysler engine rebuilder selling remanufacturedengines and small parts to Canadian Chrysler dealers. We thankthem! Chrysler introduced a whole new family of 60degree V6 engines beginning with the 3.3L OHV
Power Steering Pumps and Gearboxes
In today’s increasingly competitive marketplacethe quest for additional profits is of paramount importance notonly for continued growth and success, but for the survival ofthe company itself. This is particularly true for undercarriagespecialists such as CV axle and rack-and-pinion rebuilders. Niche market diversification can accomplisheconomic and strategic objectives that will not only improve the"profitable" cash flow
Power Investments, Inc.: Building An Empire In The Rebuilding Industry
Mike Jarvis, 53, president of Power Investments,Inc., is quietly building an empire in the rebuilding industry.If you want proof, just take a look at his frequent flyer miles(he’s averaged about 2,500 business miles per week over the pastfour years), and the fact that company growth has averaged between12-18% per year, mostly through acquisitions, since 1983.
Blasting Technology: This Cost-Effective Cleaning Procedure Has Improved
When it comes to parts cleaning by blasting,the idea of propelling abrasives at parts to clean them of rust,carbon, paint or other difficult contaminants is a simple one.But the technology involved with this cost-effective cleaningprocedure has improved, and rebuilders can take advantage of manyoptions to eliminate out-dated, labor-intensive cleaning practicesin the shop. Scott Christiansen of
Engines Market: Total Engine Production Generated By Manufacturers In The U.S. And Canada Increased in 1996
Annual production of remanufactured enginesclimbed from 1.32 million in 1995 to 1.57 million during 1996– an increase of about 19.4%. Engine production figures are based on a universe of 120 U.S.and Canadian rebuilders that rebuilt an average of 13,113 short,long and complete engines each last year. Survey results werecompiled from a detailed questionnaire mailed to
The Core Market Right Now Is Very Soft
Core suppliers throughout the industry aretrying to interpret the reasons for a slower market this year."The core market right now is very soft", says Bob Grady,president of Rebuilders Automotive Supply (RAS) in Cranston, RI."Unit sales are about the same, but prices and margins aredown and terms are longer, so profits are down too." It’s human