Aviaid Dry Sump System for Late Viper V10 Engines - Engine Builder Magazine

Aviaid Dry Sump System for Late Viper V10 Engines

The specially engineered pan is fabricated from 6061-T6 billet aluminum and features a .250” thick rail, .125” body and a .500” plate to mount the pump.

Aviaid has created a compact dry sump system for the latest generations (3, 4, 5) of the Viper V10 engine. The new package is centered on a 7-stage series 1 pump, which features five oil pan scavenging sections, one pressure section, and one section for scavenging a turbocharger. It can be configured with as many or few sections as desired, while a fuel pump can be driven off the back of the pump.

Aviaid dry sump system
Aviaid makes oiling systems for both late and early Gen Viper engines.

A specially engineered pan is fabricated from 6061-T6 billet aluminum and features a .250” thick rail, .125” body and a .500” plate to mount the pump. The sump features five pick-up compartments with screened AN-12 fittings. The pump is driven by an HTD belt.

Aviaid manufactures complete oil systems that include the pump, pan, sump tank, drives and adapters. They have dozens of mounts and can adapt to most any 4, 6, 8, 10 or 12-cylinder engine (including early Vipers). For more info: www.Aviaid.com or call 818-998-8991 or send an e-mail to [email protected].

You May Also Like

CP-Carrillo Pistons and Rods for VW/Audi

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels.

CP-Carrillo offers #SC7630 pistons and rods for the Volkswagen/Audi EA888 Gen III 2.0L TSI/TFSI engine. This engine is in numerous applications, including the VW Golf Mk7 R, Audi S3 and Audi TTS vehicles.

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels to take your engine to the next level. The pistons are made to accept 1mm larger valves, as well as deeper valve pockets to accommodate many aftermarket cams.

Eneos Racing Pro 10w-50 Oil

With Racing Pro 10w-50, a 50/50 ester mix provides exceptional wear protection, extra high horsepower, and further anti-oxidation stability.

Eneos 10w-50 motor oil
Fluidampr Performance Damper for Mazda Miata

Fluidampr performance dampers protect your engine from destructive crankshaft torsional vibration.

Fluidampr Mazda Miata damper
Mahle PowerPak Pistons for 6.0L and 6.4L Powerstroke Engines

All four sets offer incredible versatility, allowing a daily driver to become a weekend warrior for drag, dyno, or pulling competitions.

Point One Small Block Chevy Head Stud Kit

Point One’s E190 head studs boast an impressive 190,000 psi nominal tensile strength.

Cadillac Supercharged LS engine

Other Posts

ProCharged 5.000” Bore Space Billet Big Block Chevy Engine

One of the first 5.000″ bore space big block Chevy engines that Visner Engine Development has come out with in this new design, this billet engine was built by Nick Bacalis of Bullet Racing Engines for a 1971 C10 belonging to Michael Rieck. Check out what 4,000-plus horsepower looks like!

billet big block Chevy engine
Weinle Motorsports Sheet Metal Intakes

These custom aluminum sheet metal intakes are built to your specs.

Peterson Fluid Systems’ Fat Boy Dirt Late Model Oil Tank

Peterson Fluid Systems’ new 08-0919 Fat Boy Dirt Late Model Oil Tank provides engine builders with more oil capacity when chassis space is limited. With a lower profile design and all the standard features of their race-proven DLM tanks, this tank is 18.62” tall with a 5-gallon capacity. Related Articles – Total Seal Severe-Duty High-Performance Diesel Rings

Total Seal Severe-Duty High-Performance Diesel Rings

New Total Seal diesel ring sets are available for Cummins 5.9L and 6.7L, Duramax 6.6L, Powerstroke 6.4L to 7.3L, and custom sets.