Nitrous Update
The use of nitrous oxide in diesel engines is not a new concept. In fact, it has been used in drag racing for decades. However, it is only in recent years that it has gained widespread popularity in the worlds of diesel truck pulling and drag racing. Now, it seems as if almost everyone in the competitive scene is using it.
Nitrous-Powered 7.3L Ford Godzilla Engine
Looking to push the limits of a production Ford Godzilla engine, Paul Svinicki of Paul’s High Performance stuck the engine in his 2010 Cobra Jet, added some better components and some nitrous. Check out the result!
Paul’s High Performance Nitrous-Powered Ford Godzilla Engine
GODZILLA!!!!! We stopped by the Fluidampr booth at the 2022 PRI Show to say hi and found Paul Svinicki of Paul’s High Performance hanging out, along with his nitrous-powered Ford 7.3L Godzilla engine that runs in his 2010 Cobra Jet Ford Mustang. This 1,100-horsepower Godzilla is our Engine of the Week.
434 cid Small Block Chevy Nitrous Engine
Competing in the High 5 class at the 2022 Builder’s Brawl, Kyle Needham and his 1979 Camaro were relying on a 434 cid small block Chevy nitrous engine to help get the win. Check out the details of this build!
Kyle Needham’s Nitrous 434 cid Small Block Chevy Engine
Walking through the pit area of the 2022 Builder’s Brawl earlier this summer, we saw Kyle Needham and his team thrashing on their drag car and its 434 cid small block Chevy. We wanted to know some more about what was in the nitrous car, so we asked him.
Nitrous-Powered 478 cid Big Block Chevy Engine
Jason Chapman’s 1968 Camaro SS features a nitrous-powered 478 cubic inch big block Chevy engine complete with a Benjamin Franklin $100 wrapped intake manifold. See what else Jason has in this engine build!
632 Big Block Reher-Morrison Nitrous Engine
Swamp Thing is a well-known drag car, and thanks to Joey Baroni, the car is getting back out to race tracks across the country. Check out Swamp Thing’s 632 big block Reher-Morrison nitrous engine!
632 Big Block Chevy Nitrous Engine
Looking to run 5.75-5.80 in the High 5 class of the 2022 Builder’s Brawl, Mike McCoy showed up with his 1966 Chevy II Nova and a BluePrint Engines 632 big block Chevy nitrous engine under the hood. Check it out!
BluePrint 632 cid Big Block Chevy Nitrous Engine
During the 2022 Builder’s Brawl put on by Joe Zolper at Worldwide Technology Raceway outside of St. Louis, we caught up with drag racer Mike McCoy and learned more about his 1966 Chevy II Nova and its 632 big block Chevy engine.
Nitrous Supply Nitrous Charging Kit
Mike Thermos and his team at Nitrous Supply have been working with leading forced induction racers to improve performance through adding a shot of nitrous into the intake tract. This increases performance and eliminates turbo “lag.” It’s ideal for both drag racing and drifting. The injection of N2O does three things. First, it significantly cools
Nitrous Supply Inc. Launches New Website
Nitrous Supply, Inc. has launched its new website: www.nitrous-supply.com. The company, founded by nitrous oxide pioneer Mike Thermos, specializes in key components —like nozzles, valves and solenoids— that can enhance the performance of any brand system. Thermos, who has recently received a Lifetime Achievement “Wally” from NHRA for his contributions to drag racing and named
Boosted Diesels: Inside Turbo Systems and Nitrous Combos
There’s nothing more satisfying than a good turbo system…
Turbocharged & Nitrous-Boosted 6.7L Cummins Engine
Looking for a badass street/strip truck, a customer recently chose LinCo Diesel Performance to do the engine, transmission and truck work. The result was this 6.7L Cummins build that goes a few steps beyond what LDP regularly churns out. Find out what went into the build.
Supercharged and Nitrous-Boosted LS7 Engine
We met up with Ray Lichtenberg at the 2021 Hot Rod Power Tour during the first stop of the tour at Summit Motorsports Park in Norwalk, OH. He showed us his LS7 engine he had just completed for his all-wheel-drive 1987 Buick that was parked at the Continental Tire booth.
582 cid SR20 Nitrous Jet Boat Engine
This 582 cid SR20 nitrous jet boat engine was built by Mike Miller of Mike Miller Racing Engines for all-out, max-effort racing. The 1,700-horsepower capable engine is one of Miller’s best nitrous combinations yet. Find out why!
Carbon Fiber Bottles from Nitrous Supply
Both valves feature a 1/8 NPT gauge port to enable users to keep tabs on nitrous pressure.
Pat Musi’s Love of Nitrous
These days, it’s impossible to look at a nitrous engine without recognizing Musi’s influence on the combination. He made advancements with nitrous power that no one saw coming, earning him prestige in the industry.
Stock 2005 LLY Duramax Engine with Nitrous
These days, it doesn’t take much to build a custom diesel engine capable of some serious horsepower. However, it takes a bit more effort to keep a diesel engine completely stock and make it live near 1,000 horsepower. That’s what Walt Schiemann and his shop Prime Diesel & Automotive are attempting to do with a stock LLY Duramax. Check it out!
TRE Big Block Chevy Nitrous Engine
Five years ago in February, the guys at TRE Racing Engines were busy building engines, machining parts and testing engines on the dyno. It was a day just like any other. However, for owner Taylor Lastor and the rest of the employees at TRE Racing Engines in Cleveland, TX, this particular day would end much
427 Small Block Ford Nitrous Engine
Looking for a new engine in his ’65 Ford Falcon bracket car, a customer came to IMM Engines to build 650 horsepower. Shop owner Brian Hafliger delivered a 427 small block Ford capable of nearly 700 hp N/A and 1,000 hp on nitrous. Find out what went into the build!
